nVent HOFFMAN Vortex Cooler 586W

Product Overview

The nVent HOFFMAN Vortex Cooler 586W is an easy-to-install, maintenance-free cooling solution for enclosures. It effectively cools and purges enclosures by producing cold air from compressed air, with no moving parts. This cooler also helps reduce relative humidity within the enclosure, preventing moisture condensation when the enclosure is sealed.

Key Features

• Compact, reliable, and low-cost cooling solution.
• Produces cold air from compressed air with no moving parts.
• Easy mounting through a standard electrical knockout.
• Maintains relative humidity below 45% for continuous operation.
• Suitable for various enclosure types including TYPE 4 and 4X.
• Silencers included for most TYPE 4 and 4X units to minimize noise.
• Vertical installation required to maintain protection degree.
• Materials: Stainless steel internal Vortex tube, with external covers in plastic and aluminum depending on the type.
• Protection ratings up to IP66 and TYPE 4X.

Product Attributes

• Dimensions: 185mm (Height), 63mm (Width), 63mm (Depth)
• Material: Stainless Steel
• Nominal Cooling Capacity: 586W
• Air Flow: 850 l/min
• Noise Level: 74dB(A)
• Hole Diameter: 48mm min
• Air Connection Inlet: 1/4"
• Weight: 2.25kg

Additional Information

Cooling capacity is calculated with pressurized air at 20°C and 7-bar pressure. A silencer and low-pressure relief valve are not included with certain models (e.g., BP4008, BP4015, BP4030, BP4040, BP4608, BP4608SS). For detailed installation and usage instructions, please refer to the official nVent documentation available at www.nvent.com.