Vortex Cooler 820W, BP4640SS

Product Overview

The nVent HOFFMAN Vortex Cooler, model BP4640SS, is a compact, reliable, and low-cost solution for cooling and purging enclosures. It operates without moving parts, requiring no maintenance. In addition to cooling, it effectively reduces the relative humidity within the enclosure, preventing overheating and ensuring optimal conditions. Its easy mounting through a standard electrical knockout makes it suitable for installation even in existing enclosures.

Features

• Description: Produces cold air from compressed air with no moving parts. Easy mounting via standard electrical knockout.
• Operation: Maintains relative humidity below 45% for continuous operation, preventing internal condensation when the enclosure is sealed.
• Noise Reduction: Most TYPE 4 and 4X units include a silencer to minimize noise.
• Installation: Coolers must be installed vertically to maintain the protection degree.
• Material: Internal Vortex tube manufactured in stainless steel. External cover options include plastic and aluminium (BP TYPE 12), aluminium (BP TYPE 4), and stainless steel (BP TYPE 4X).
• Protection: Depending on the type, protection is up to IP66 | TYPE 4X.
• Pack Quantity: Includes Vortex cooler with mounting accessories.
• Cost Reduction: Reduces customer labor costs due to ease of installation.
• Recommendations: Installation of a thermostat (BPT) and an air distribution kit (BPA) is recommended.

Product Attributes

• Height: 185mm
• Width: 63mm
• Depth: 63mm
• Material: Stainless Steel (for BP4640SS)
• Nominal Capacity (Watts): 820W
• Protection Rating: NEMA 4X
• Finish: Brushed
• Airflow: 1133 l/min
• Noise Level: 78dB(A)
• Cooling Capacity: 820W
• Hole Diameter: 48mm minimum
• Air Connection Inlet: 1/4"
• Weight: 1 kg

Additional Product Details

• Cooling capacity is calculated with pressurized air at 20°C and 7-bar pressure.
• Silencers are not included with specific models: BP4008, BP4015, BP4030, BP4040, BP4608, BP4608SS.
• Low pressure relief valves are not included with specific models: BP4008, BP4015, BP4030, BP4040.

Important Safety Information (警告)

nVent products should only be installed and used according to nVent's product instructions and training materials. Instructions can be accessed at www.nvent.com or by contacting your nVent customer service representative. Improper installation, misuse, abuse, or failure to fully comply with nVent's instructions and warnings may result in product failure, property damage, serious personal injury, and death, and/or void the warranty.

nVent Brands

Our powerful portfolio of brands includes: CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF, TRACHTE.