Comica Vimo C 2.4G Dual-channel Mini Wireless Microphone User Manual

Foreword

Thanks for purchasing Comica 2.4G Dual-channel Mini Wireless Microphone Vimo C.

Features

• Broadcasting-level Sound Quality, Universal for Camera, Phone and Computer
• Digital Signal Processing, Support One-key Noise Reduction
• Support Real-time Audio Monitor, Mono/Stereo/Safety Mode Switch
• 4-level Adjusted Gain Control and One-click Muting
• Rotatable IPS Display for Intuitive Operation and Usage
• Rechargeable Storage Case for Charging, Storing and Power Monitoring
• Duration Up to 20 Hours, Support Working While Charging
• Multifunctional USB-C Port for Charging and Monitoring
• Low Latency < 20ms, Working Range Up to 200m (Open Area)

Notice

• Due to 2.4G wireless characteristics, please keep face to face when using, and don't turn your back to the receiver, otherwise it is easy to generate breakpoints, which is a normal phenomenon.
• Please pay attention that it can not realize STEREO function when in single-channel mode.
• Please do not expose the product to rain or moisture, and avoid having water or other liquids spilled on it.
• Please do not use or store the product near any heat sources such as radiators, stoves, or other heat-producing appliances.
• This product is a high-precision product, please prevent it from dropping or colliding.

Packing List

Main Parts:

• Transmitter (TX)
• Receiver (RX)
• Bat Case

Multiple Selections:

• C1 = TX + RX
• C2 = TX + TX + RX
• C3 = TX + TX + RX + Bat Case

Accessories:

• ① Wind Muff
• ② 3.5mm TRS-TRRS Audio Cable
• ③ 3.5mm TRS-TRS Audio Cable
• ④ 2 in 1 Charging/Monitoring Adapter Cable
• ⑤ 3 in 1 Charging Cable
• ⑥ USB C-USB A Charging Cable
• ⑦ User Manual
• ⑧ Warranty Card

The accessories of each combination include:

• C1 = ①+②+③+④+⑤+⑦+⑧
• C2 = ①x2+②+③+④+⑤+⑦+⑧
• C3 = ①x2+②+③+④+⑥+⑦+⑧

Components and Instruction

Transmitter (TX):

• ① Internal Mic
• ② Working Status Indicator: Blink blue when unpaired; Show blue when paired; Show green when denoise is on; Show red when muting
• ③ Belt Clip
• ④ Power/Muting Button: Long press for on/off; Short press for muting
• ⑤ Denoise/Pairing Button: Short press for denoise on/off; Long press for pairing
• ⑥ Charging Contact
• ⑦ USB-C Charging Port

Receiver (RX):

• ① 3.5mm TRS Audio Output Port
• ② Power/Mono/Stereo/Safety Mode Switch Button: Long press for On/Off; Short press for mono/stereo/safety mode switch
• ③ LCD Display
• ④ Belt Clip
• ⑤ USB Charging/Monitoring Port: Insert USB-C headphone to monitor or connect the power bank/DC power to charge; Connect the 3.5mm headphone to monitor and the power bank/DC power to charge simultaneously via the 2 in 1 monitoring/charging cable
• ⑥ Volume Control/Pairing/Display Rotation Button: Short press for volume adjustment of channel A; Long press for display rotation
• ⑦ Volume Control/Pairing/Display Rotation Button: Short press for volume adjustment of channel B; Long press for display rotation
• ⑧ Charging Contact

Bat Case:

• ① Power Indicator: There are four power indicator lights, one of which represents 25% of the bat case's power.
• ② Reset Hole: If there is an abnormal phenomenon such as a charging problem, insert a reset pin into the reset hole to reset it.
• ③ USB-C Charging Port

The transmitters and receiver are automatically turned off when placed in the Bat Case and turned on automatically when removed.

Screen Display (Receiver RX)

The receiver's LCD display shows:

• Mode: Stereo, Mono, Safety
• Receiver's Battery Level
• Transmitter's Battery Level
• Signal Strength
• Transmitter A status (Vol, Mute, Pair) with Audio Dynamic Bar
• Transmitter B status (Vol, Mute, Pair) with Audio Dynamic Bar

Installation and Usage

Pairing

The devices are paired at the factory. If re-pairing is needed, follow these steps:

1. Long press the two pairing buttons on the receiver until 'Pair' is displayed.
2. Long press the pairing button on the transmitter until its indicator blinks blue rapidly.
3. When pairing is successful, the 'Pair' text on the receiver disappears, and the transmitter's blue indicator stays lit. The first paired transmitter is Channel A (left channel), and the second is Channel B (right channel).

1. Transmitter Installation

Attach the transmitter to the collar with the internal microphone pointing towards the sound source.

2. Receiver Installation

Work with Camera:

Attach the receiver to the camera's hot shoe mount using the belt clip. Connect the receiver to the camera using the 3.5mm TRS-TRS audio cable.

Work with Mobile Phone/Computer:

Connect the receiver to the mobile phone/computer using the 3.5mm TRS-TRRS audio cable and the appropriate audio adapter cable (adapter cable not included). You can choose whether to monitor the audio.

3. Monitoring/Charging

Method One:

Connect USB-C headphones for real-time monitoring, or connect a power bank/DC power source using the USB C-USB A charging cable to charge the receiver.

Method Two:

Connect 3.5mm headphones using the 2 in 1 charging/monitoring adapter cable for real-time monitoring, and simultaneously connect a power bank/DC power source to charge the receiver.

Specification

Contact Information

Website: comica-audio.com

Facebook: Comica Audio Tech Global

Instagram: Comica Audio

YouTube: Comica Audio

Email: support@comica-audio.com

The COMICA LOGO is a trademark registered and owned by Commlite Technology Co., Ltd.