COMICA PROFESSIONAL AUDIO EQUIPMENT

Foreword

Thanks for purchasing Comica 2.4G Dual-channel Mini Wireless Microphone Vimo C.

Features

• Broadcasting-level Sound Quality, Universal for Camera, Phone and Computer
• Digital Signal Processing, Support One-key Noise Reduction
• Support Real-time Audio Monitor, Mono/Stereo/Safety Mode Switch
• 4-level Adjusted Gain Control and One-click Muting
• Rotatable IPS Display for Intuitive Operation and Usage
• Rechargeable Storage Case for Charging, Storing and Power Monitoring
• Duration Up to 20 Hours, Support Working While Charging
• Multifunctional USB-C Port for Charging and Monitoring
• Low Latency < 20ms, Working Range Up to 200m(Open Area)

Notice

[Warning] Due to 2.4G wireless characteristics, please keep face to face when using, and don't turn your back to the receiver, otherwise it is easy to generate breakpoints, which is a normal phenomenon.

[Warning] Please pay attention that it can not realize STEREO function when in single-channel mode.

[Warning] Please do not expose the product to rain or moisture, and avoid having water or other liquids spilled on it.

[Warning] Please do not use or store the product near any heat sources such as radiators, stoves, or other heat-producing appliances.

[Warning] This product is a high-precision product, please prevent it from dropping or colliding.

Packing List

Main Parts:

Transmitter (TX) [Illustration: A single, elongated device with a patterned side and a flat side.]

Receiver (RX) [Illustration: A single, elongated device with a flat side and a patterned side.]

Bat Case [Illustration: A rectangular charging case with rounded edges and a lid.]

Multiple Selections:

C1=TX+RX [Illustration: One Transmitter and one Receiver.]

C2=TX+TX+RX [Illustration: Two Transmitters and one Receiver.]

C3=TX+TX+RX+Bat Case [Illustration: Two Transmitters, one Receiver, and one Bat Case.]

Accessories

• ① Wind Muff
• ② 3.5mm TRS-TRRS Audio Cable
• ③ 3.5mm TRS-TRS Audio Cable
• ④ 2 in 1 Charging/Monitoring Adapter Cable
• ⑤ 3 in 1 Charging Cable
• ⑥ USB C-USB A Charging Cable
• ⑦ User Manual
• ⑧ Warranty Card

The accessories of each combination include:

C1=①+②+③+④+⑤+⑦+⑧

C2=①x2+②+③+④+⑤+⑦+⑧

C3=①x2+②+③+④+⑥+⑦+⑧

Components and Instruction

Transmitter (TX):

Diagram of Transmitter (TX) showing numbered parts:

• ① Internal Mic: The microphone element.
• ② Working Status Indicator: Light indicator showing pairing status (blink blue when unpaired, blue when paired), denoise status (green when on), and mute status (red when muting).
• ③ Belt Clip: For attaching the transmitter to clothing.
• ④ Power/Muting Button: Long press for on/off; Short press for muting.
• ⑤ Denoise/Pairing Button: Short press for denoise on/off; Long press for pairing.
• ⑥ Charging Contact: Connects to the Bat Case for charging.
• ⑦ USB-C Charging Port: For charging the transmitter.

Receiver (RX):

Diagram of Receiver (RX) showing numbered parts:

• ① 3.5mm TRS Audio Output Port: For connecting to cameras, phones, or computers.
• ② Power/Mono/Stereo/Safety Mode Switch Button: Long press for On/Off; Short press for mono/stereo/safety mode switch.
• ③ LCD Display: Shows status information.
• ④ Belt Clip: For attaching the receiver.
• ⑤ USB Charging/Monitoring Port: For connecting USB-C headphones for monitoring or connecting to a power bank/DC power for charging. Can also connect a 3.5mm headphone for monitoring and power bank/DC power for charging simultaneously via the 2 in 1 cable.
• ⑥ Volume Control/Pairing/Display Rotation Button (Channel A): Short press for volume adjustment of channel A; Long press for display rotation.
• ⑦ Volume Control/Pairing/Display Rotation Button (Channel B): Short press for volume adjustment of channel B; Long press for display rotation.
• ⑧ Charging Contact: Connects to the Bat Case for charging.

[Note] It is recommended to use USB-C headphones without DAC chip for better monitoring experience.

Bat Case:

Diagram of Bat Case showing numbered parts:

• ① Power Indicator: Four lights, each representing 25% of the case's power.
• ② Reset Hole: Insert a reset pin to reset the device if there is a charging problem or other abnormal phenomenon.
• ③ USB-C Charging Port: For charging the Bat Case.

[Note] The transmitters and receiver are automatically turned off when placed in the Bat Case and turned on automatically when removed.

Screen Display (Receiver RX)

The receiver's LCD display shows the following information:

• Mode: Stereo, Mono, or Safety.
• Receiver's Battery Level: Indicated by battery icons.
• Transmitter's Battery Level: Indicated by battery icons for each transmitter.
• Signal Strength: Indicated by signal strength icons [signal strength icon].
• Transmitter A Status: Displays channel 'A', volume level (Vol3), mute status, and pairing status. Includes an Audio Dynamic Bar.
• Transmitter B Status: Displays channel 'B', volume level (Vol3), mute status, and pairing status. Includes an Audio Dynamic Bar.

Installation and Usage

Pairing

All units are paired at the factory. For re-pairing:

When neither transmitter is paired: Turn on transmitters and receiver. Long press two pairing buttons on the receiver simultaneously until "PAIR" is displayed. (If the display is dim, short press any button to light it up first). Long press pairing buttons on the two transmitters respectively until they pair. During pairing, transmitter indicators blink blue rapidly. When paired, indicators show solid blue, and the receiver displays the transmitter status.

If one transmitter is not paired: Turn off the paired transmitter first. Follow the steps above to pair the unpaired one. Once paired, turn on the other paired transmitter to use.

[Diagram: Two transmitters and one receiver, with dotted lines and link symbols [link symbol] connecting them, illustrating the pairing process.]

Transmitter Installation

Install the transmitter on the collar so that the internal mic points to the sound source.

[Diagram: Illustration showing a transmitter being clipped onto a shirt collar, with an arrow indicating placement.]

Receiver Installation - Work with Camera

Hold the receiver via its belt clip onto the camera's hot shoe mount. Connect the receiver to the camera using the 3.5mm TRS-TRS audio cable.

[Diagram: Illustration showing a receiver being attached to a camera's hot shoe mount and a cable connecting the receiver to the camera's audio input.]

Receiver Installation - Work with Mobile Phone/Computer

Connect the receiver to a mobile phone or computer using the 3.5mm TRS-TRRS audio cable and the appropriate audio adapter cable (adapter cable must be purchased separately).

[Diagram: Illustrations showing connections from the receiver to various mobile phones and computers using different adapter cables.]

Monitoring/Charging

Method One

Connect USB-C headphones [headphone icon] to monitor audio, or connect a power bank/DC power using the USB C-USB A charging cable to charge the receiver.

[Diagram: Illustration showing headphones connected to the receiver via USB-C, and a separate connection from a power source [charging icon] to the receiver via USB-C cable.]

Method Two

Connect 3.5mm headphones [headphone icon] through the 2 in 1 charging/monitoring adapter cable for monitoring, and connect a power bank/DC power [charging icon] to charge the receiver simultaneously.

[Diagram: Illustration showing a 3.5mm headphone and a power source connected to the receiver via the 2-in-1 adapter cable.]

Specification

Contact and Support

Website: comica-audio.com

Facebook: Comica Audio Tech Global

Instagram: Comica Audio

YouTube: Comica Audio

Email: support@comica-audio.com

The COMICA LOGO is a trademark which is registered and owned by Commlite Technology Co., Ltd.