MTD Model Series 260 Lawnmower Parts Diagram and List
Exploded view diagram of the MTD Model Series 260 lawnmower, illustrating the assembly of various components. The diagram uses numbered callouts to identify individual parts.
The document also features a visual comparison of wheel tread types: Zag Tread and Bar Tread.
Parts List
Ref. No. | Part No. | Description |
---|---|---|
1 | 747-1214 | Drive Control |
2 | 747-1161A | Blade Control |
3 | 746-1113 | Control Cable - 37.75" |
746-1114 | Control Cable - 50.56" | |
4 | 746-04204 | Drive Control Cable |
5 | 749-1092A | Upper Handle |
6 | 710-1205 | Eye Bolt |
7 | 720-0279 | Wing Nut, 1/4-20 |
8 | 732-1026 | Spring Lever |
9 | 631-04045 | Mulching Baffle |
10 | 710-1174 | Carriage Bolt, 5/16-18 x 2.0 |
11 | 748-0390 | Bearing Support Spacer |
12 | 720-04072 | Wing Nut |
13 | 749-04037 | Lower Handle |
14 | 725-0157 | Cable Tie |
15 | 17098 | Hinge Clip |
16 | 731-04019 | Trail Shield |
17 | 710-0599 | Hex Screw, 1/4-20 x.500 |
18 | 682-3064 | Handle Bracket Assy - RH |
19 | 736-0741 | Bell Washer, .760 x 1.25 x.041 |
20 | 712-04065 | Lock Nut, 3/8-16 |
21 | 682-3065 | Handle Bracket Assembly - LH |
22 | 687-02046 | 22” Deck Assembly |
23 | 710-0654A | Hex Washer Scr., 3/8-16 x 1.0 |
24 | 754-04100 | V-Belt, 3L x 32.90 |
25 | 782-0585A | Forward Height Adj. Plate - LH |
26 | 728-0199 | Rivet |
27 | 750-04407 | Sleeve Spacer, .550 ID x 2.22 |
28 | 716-0198 | Retainer Ring |
29 | 618-04375A | Transmission Assy. Comp. |
30 | 750-04406A | Sleeve Spacer, .550 ID x 8.51 |
31 | 731-0073 | Transmission Cover |
731-04636 | Transmission Cover - Yellow | |
32 | 748-04016A | Blade Adapter |
33 | 742-0742A | 22" Mulching Blade |
34 | 736-0452 | Washer, Bell, .396 x 1.140 x .095 |
35 | 710-1044 | Hex Cap Screw, 3/8-24 x 1.5 |
36 | 782-0584 | Forward Hght. Adj. Plate - RH |
37 | 734-1987 | Rear Wheel, 8 x 1.8, Bar |
734-04087 | Rear Wheel, 8 x 1.8, Bar - Yellow | |
38 | 710-0216 | Hex Cap Screw, 3/8-16 x.75 |
39 | 720-0426 | Adjustment Knob |
40 | 716-0865 | Snap Ring.500 |
41 | 731-04643 | Wheel Dust Cover |
42 | 715-0221 | Pin |
43 | 717-1762 | Spur Gear 14T - RH |
717-1761 | Spur Gear 14T - LH | |
44 | 732-04049 | Ext. Spring, .47 OD x 2.50 |
45 | 634-0190 | Front Wheel, 8 x 1.8, Bar |
634-04100 | Front Wheel, 8 x 1.8, Bar, Yellow | |
46 | 747-0710 | Hinge Pin |
47 | 732-1014 | Torsion Spring |
48 | 731-1034B | Side Discharge Assembly |
49 | 736-0270 | Bell Washer, .265 ID x.75 OD |
50 | 17032A | Deflector Chute Adapter |
51 | 741-0751 | Height Adjustment Bearing |
52 | 687-02051 | Rear Hgt. Adj. Lever Assembly |
53 | 687-02140 | Front Lever Assembly - LH |
687-02141 | Front Lever Assembly - RH | |
54 | 687-02094 | Rear Pivot Arm Assembly |
55 | 738-1173 | Shoulder Screw, 3/8-16 |