MTD Model Series 580 Lawn Mower Parts
This document provides a detailed parts list and diagram for the MTD Model Series 580 lawn mower. The diagram illustrates the various components of the mower, and the table below lists each part with its corresponding part number and description.
Ref. No. | Part No. | Part Description |
---|---|---|
1 | 749-0438D | Upper Handle |
2 | 747-0824 | Control Handle |
3 | 710-1270 | C-Sunk Screw 1/4-20 x 1.3" |
4 | 746-0883 | Throttle Housing |
5 | 712-0324 | Hex Lock Nut 1/4-20 |
6 | 720-0279 | Handle Knob |
7 | 710-1205 | Rope Guide |
8 | 710-1174 | Carriage Bolt 5/16-18 x 2" |
9 | 736-0451 | Shoulder Washer .320 ID x .930 OD |
10 | 720-0284 | Wing Nut |
12 | 746-0551 | Blade Control Cable 43" |
12 | 746-0554 | Blade Control Cable 40.5 " |
13 | 749-0907B | Lower Handle |
14 | 664-0084 | Grass Bag |
15 | 747-0995A | Grass Catcher Frame |
16 | 782-5007A | Rear Mulch Plug |
17 | 782-5004 | Rear Baffle - RH |
18 | 714-0104 | Hairpin Clip |
19 | 782-7599A | Grass Bag Door |
20 | 732-0700 | Wire Rod |
21 | 731-1236 | Trailshield |
22 | 732-0809 | Door Spring |
23 | 747-0996 | Chute Door Pivot Rod |
24 | 750-0434 | Spacer .375 O.D. x .50 I.D. x 1.02" |
25 | 682-3058 | Handle Bracket Assembly - LH |
25 | 682-3059 | Handle Bracket Assembly - RH |
26 | 782-0310A | Deck 21" |
27 | 710-0654A | Hex Washer Screw 3/8-16 x 1.0 |
28 | 710-0703 | Hex Carriage Screw 1/4-20 |
29 | 712-3005 | Flange Lock Nut 3/8-16 |
30 | 736-0356 | Bell Washer .390 ID x .380 OD |
31 | 712-0130 | Hex Lock Nut 3/8-16 |
32 | 682-3056A | Handle Bracket Assembly - RH |
33 | 710-0286 | Machine Screw 1/4-20 x .500 |
34 | 710-0896 | Hex Washer Screw 1/4-14 x .625 |
35 | 710-0514 | Hex Cap Screw 3/8-16 x 1.0 |
36 | 720-0312 | Foam Grip |
37 | 17488A | Pivot Bar - RH |
37 | 17489A | Pivot Bar - LH |
38 | 736-0105 | Spring Washer .375 ID x .870 OD |
39 | 732-0866 | Spring Lever |
40 | 738-0507B | Shoulder Screw |
41 | 734-1864 | Rear Wheel Assembly 14 x 1.8 |
42 | 736-0456 | Flat Washer .510 ID x 1.37 OD |
43 | 736-0182 | Wave Washer .500 ID x 1.0 OD |
44 | 738-0481A | Shoulder Screw |
45 | 14578 | Front Height Adjuster - RH |
45 | 14579 | Front Height Adjuster - LH |
46 | 734-1988 | Front Wheel Assembly 7 x 1.8 |
47 | 738-0102 | Shoulder Bolt |
49 | 712-0431 | Flange Lock Nut 3/8-16 |
50 | 782-5002 | Front Baffle |
51 | 782-5003 | Rear Baffle - LH |
52 | 710-1017 | Tap Screw 1/4-14 x .625. |
53 | 15261A | Height Adjustment Plate |
54 | 720-0426 | Height Adjustment Knob |
55 | 15262B | Pivot Bar |
56 | 732-0404 | Spring Lever |
57 | 748-0376C | Blade Adapter |
58 | 742-0741 | 21" Mulching |
58 | 742-0641 | 21" Standard |
59 | 736-0524A | Blade Bell Support |
60 | 710-1044 | Hex Cap Screw 3/8-24 x 1.5 |