SECTION 10: PARTS LIST FOR MODEL 565
The provided diagrams illustrate the assembly of the MTD Model 565 lawnmower. These are exploded views that visually represent how various components fit together. Each part is identified by a reference number, which corresponds to its listing in the detailed parts tables below. This information is crucial for identifying and ordering replacement parts for maintenance and repair.
Parts List (Pages 1-2)
| Ref. No. | Part No. | Description | Ref. No. | Part No. | Description |
|---|---|---|---|---|---|
| 1. | 631-04147 | Handle Assembly Comp.: Red | 23. | 747-0996 | Pivot Rod |
| 2. | 731-2628A | Handle Panel | 24. | 732-04090A | Torsion Spring LH |
| 24. | 732-04089A | Torsion Spring RH | |||
| 3. | 728-0199 | Plastic Rivet | 25. | 714-0104 | Cotter Pin |
| 4. | 749-1507 | Upper Handle | 26. | 712-0397 | Wing Nut |
| 5. | 726-0106 | Speed Cap 1/4" Rod | 27. | 710-0703 | Carriage Bolt 1/4-20 |
| 6. | 747-2133A | Bail: Smart Speed™ | 28. | 738-1002 | Shoulder Screw 1/4-20 |
| 7. | 747-2132A | Control Rod | 29. | 710-04371 | Screw 1/4-15 |
| 8. | 720-0279 | Handle Knob | 30. | 712-04064 | Flange Lock Nut 1/4-20 |
| 9. | 720-0284 | Handle Knob | 31. | 731-04150 | Rear Baffle 21" Rd. |
| 10. | 710-1205 | Eye Bolt | 32. | 710-0599 | TT Screw 1/4-20 x 0.5 |
| 11. | 746-04039 | Control Cable: Smart Speed™ | 33. | 731-04177 | Chute Deflector |
| 12. | 710-0487 | Carriage Bolt 5/16-18 x 2.0 | 34. | 687-02055 | Mulch Plug Comp. |
| 13. | 710-0809 | TT Screw 1/4-20 | 35. | 738-1002 | Shoulder Screw 1/4-14 |
| 14. | 746-1250 | Fwrd Drive Cable: Smart Speed™ | 36. | 710-1650 | Shoulder Screw # 12-24 |
| 15. | 726-0240 | Cable Tie | 37. | 731-05065 | Transmission Cover |
| 16. | 749-0907B | Lower Handle | 38. | 754-0465 | V-Belt |
| 17. | 731-04998 | Rear Trailing Shield | 39. | 748-04015A | Blade Adapter w/ Pulley |
| 18. | 732-0700 | Wire | 40. | 742-0741 | 21" Mulching Blade |
| 19. | 664-04034 | Grassbag Assembly | 41. | 736-0524B | Blade Bell Support |
| 20. | 747-04080 | Grass Bag Frame | 42. | 710-1257 | Hex Screw 3/8-24 x 2.50 |
| 21. | 731-04134A | Rear Discharge Door | |||
| 22. | 750-04162 | Spacer .375 x .50 x 1.02 | |||
| * Not Pictured in Illustration. | |||||
Additional Parts List (Pages 3-4)
| Ref. No. | Part No. | Description | Ref. No. | Part No. | Description |
|---|---|---|---|---|---|
| 1. | 710-0599 | TT Screw 1/4-20 x 0.5 | 32. | 710-1652 | TT Screw 1/4-20 x.625" |
| 2. | 736-0270 | Bell Washer .265 x 0.75 | 33. | 734-04093 | Wheel, 12 x 2.125 Zag Gray IDL |
| 3. | 17032A | Deflector Chute Adapter | 34. | 715-0221 | Dowel Pin |
| 4. | 732-1014 | Torsion Spring | 35. | 712-0896 | Lock Nut |
| 5. | 747-0710 | Hinge Pin | 36. | 782-7598 | Belt Keeper |
| 6. | 710-0654A | Self-Tapping Sems Screw | 37. | 741-0124 | Ball Bearing |
| 7. | 787-01222 | 21" Deck | 38. | 750-1050 | Flange Bearing |
| 8. | 710-0216 | Hex Screw 3/8-16 x.75 | 39. | 712-3025 | Hex Jam Nut 5/16-24 |
| 9. | 712-0431 | Hex Nut 3/8-16 | 40. | 736-0425 | Bell Washer .325 x.930 x.45 |
| 10. | 782-5002B | Front Baffle | 41. | 656-0047 | Pulley, 3.82 x.313 x.68 |
| 11. | 750-1165 | Sleeve Spacer 10.1" Lg. | 42. | 736-0406 | Flat Washer .422 x 1.38 x.060 |
| 12. | 750-1166 | Slev. Spacer 2.1" Lg. | 43. | 682-0029 | Front Idler Assembly |
| 13. | 734-2042 | Wheel 8 x 2.125 Black Zag Gear | 44. | 732-04001 | Extension Spring |
| 14. | 716-0865 | Snap Ring | 45. | 741-0682A | Bearing Sleeve |
| 15. | 717-1762 | Gear 14T RH FWD | 46. | 736-0570 | FI-Wash.865 x 1.145 x.030 |
| 16. | 717-1761 | Gear 14T LH FWD * | 47. | 710-0299 | Hex Screw 1/4-28 x 1.0 |
| 17. | 782-7551A | Wheel Dust Cap | 48. | 741-0699 | Needle Bearing .438 x.625 x.500 |
| 18. | 716-0102 | Snap Ring | 49. | 736-0520 | Flat Washer .504 x.700 x.030 |
| 19. | 736-0474 | Washer | 50. | 717-1492 | Pinion Shaft |
| 20. | 687-02018 | Lever Assembly RH | 51. | 618-0300A | Upper Housing |
| 21. | 687-02044 | Pivot Plate Assembly | 52. | 618-0299A | Lower Housing |
| 22. | 782-0512B | Height Adjuster Plate - RH | 53. | 710-1276 | Hex Screw w/Washer 1/4-20 x.750 |
| 22. | 782-0511A | Height Adjuster Plate - LH* | 54. | 736-0314 | Thrust Washer .375 x.070 x.030 |
| 23. | 748-0355 | Bearing Support | 55. | 736-0569 | Thrust Washer .388 x.625 x.062 |
| 24. | 741-0604A | Bearing Sleeve | 56. | 741-0673 | Flange Bearing |
| 25. | 732-0708 | Bearing Retainer | 57. | 611-0105A | Output Shaft |
| 26. | 687-02057 | Handle Bracket Assembly - LH | 58. | 682-0030 | Idler Cable Bracket Assembly |
| 27. | 687-02056 | Handle Bracket Assembly - RH* | 59. | 721-0329 | Oil Seal |
| 27. | 687-02033 | Handle Bracket - RH | 60. | 721-0457 | Oil Seal |
| 28. | 687-02031 | Handle Bracket - LH* | 61. | 682-0511A | Height Adjustment Assembly LH |
| 28. | 687-02039 | Pivot Bar RH | 61. | 682-0512A | Height Adjustment Assembly RH* |
| 29. | 732-0866 | Pivot Bar LH* | 62. | 618-04006 | Transmission Assembly Comp.* |
| 30. | 720-0312 | Foam Grip | 63. | 731-0981A | Radial Spoke Hubcap |
| 31. | 738-0507B | Shoulder Scr.500 Dia. x.434 | 64. | 720-0426 | Adjustment Knob |
| 65. | 732-0706 | Front Lever RH | |||
| 65. | 732-0707 | Front Lever LH* | |||
| * Not Pictured in Illustration. | |||||
Important Notes
IMPORTANT: For a proper working machine, use Factory Approved Parts. V-BELTS are specially designed to engage and disengage safely. A substitute (non OEM) V-Belt can be dangerous by not disengaging completely.
NOTE: For painted parts, please refer to the list of color codes below. Please add the applicable color code, wherever needed, to the part number to order a replacement part. For instance, if a part numbered 700-xxxx is painted powder black, the part number to order would be 700-xxxx-0637.
- Red Metallic: 0650
- Powder Black: 0637
