Thetford Permanent RV Toilet Owner's Manual

Product Identification

Record Your Product ID Information. See Parts page for location of Product ID/serial number labels.

Model: ____________________

Part No.: ____________________

Code: ____________________

NOTICE Removal of Product ID/serial number label can void your warranty.

Noter ici les renseignements relatifs au produit. Consulter la page des pièces pour l'emplacement des étiquettes de numéro de série et de numéro d'identification du produit.

Modèle : ____________________

N° de pièce : ____________________

Code: ____________________

AVIS Le retrait de l'étiquette du numéro de série et du numéro d'identification du produit peut annuler la garantie.

Anote aquí la información de identificación del producto. Consulte la página de piezas para averiguar la ubicación de las etiquetas de identificación/número de serie del producto.

Modelo: ____________________

Pieza n.°: ____________________

Código: ____________________

AVISO La garantía puede anularse si se retira la etiqueta de identificación/número de serie del producto.

Operation

To add water, press pedal halfway. Pour ajouter de l'eau, appuyer à moitié sur la pédale. Para añadir agua, presione el pedal hasta la mitad.

To flush, press pedal all the way. Pour actionner la chasse, appuyer à fond sur la pédale. Para descargar, presione el pedal hasta el fondo.

Fig. 1

Installation

Fig. 2

Fig. 3

Fig. 4 Bravura

Fig. 5 Style Plus

DIMENSIONS

Fig. 6

Required Tools:

• Adjustable wrench
• 1/2" ratchet or box wrench

If carpeted:

• Carpet cutting tool
• Marker or chalk

Plumbing required: For adequate flush, a 3/8" I. D. water supply line with good flow is required.

Install Toilet

1. Remove old toilet and closet flange seal.
2. Attach new closet flange seal to new toilet, lip side down (Fig. 2).
3. Style Plus and Bravura ONLY: Remove shroud from base of unit (Figs. 4 & 5).
4. With mounting bolts in place, position toilet over closet flange (Fig. 3).
5. If not carpeted, go to Step 4.
6. If carpeted, trace around toilet, remove toilet and cut away carpet to expose floor. Carpet beneath pedal may also need to be removed.
7. Connect water line to water valve/elbow using 1/2" NPT tube fittings.
8. Reset toilet. Using body weight, press toilet to floor.
9. Tighten nuts until toilet is stable. Do not overtighten.
10. Turn on water and flush. Check for leaks.
11. Bravura ONLY: Install Shroud (Fig. 4).
12. Style Plus ONLY: Attach shroud to toilet by depressing pedal and placing the pedal opening over the pedal and pushing it firmly against the base. Press the sides of the shroud to the toilet and attach two o-rings on the hooks to secure it. Make sure to engage dual lock under front of shroud by tapping shroud above pedal (Fig. 5).

Remove Toilet

Follow the installation directions in reverse order. Place towel behind toilet under water connection to catch spill.

Cleaning

Recommendation: Use Thetford Aqua-Clean™™ non-abrasive cleaner with a soft-bristle, non-abrasive bowl brush, sponge or soft cloth.

CAUTION To avoid damage, DO NOT use Petroleum based products. DO NOT USE SCOURING POWDERS, ACIDS OR CONCENTRATED CLEANERS, WHICH CAN DAMAGE SURFACES, PLASTIC PARTS AND RUBBER SEALS. FAILURE TO DO SO CAN VOID YOUR WARRANTY.

Treatments

This toilet was designed to be compatible with Thetford brand holding tank deodorants.

Winterizing

CAUTION To avoid damage, when using air pressure to blow water from lines, be sure toilet valve is open.

If water is frozen in the toilet, do not attempt to flush until ice thaws.

Use RV (potable) antifreeze only. Never use automotive type antifreeze.

1) Turn off RV's water supply. 2) Drain toilet bowl. 3) Disconnect supply line at water valve. 4) Completely drain the toilet's water supply line. 5) Add antifreeze solution and 1/4 bottle of Thetford's Toilet Seal Lubricant and Conditioners to toilet bowl.

Troubleshooting

Leaks

1. Back of toilet: check water supply line connection at water valve. Secure or tighten as necessary. If leak persists from water valve, replace.
2. Vacuum breaker leaks while flushing: replace Vacuum Breaker or water module, depending on model.
3. Between closet flange and toilet: check flange nuts for tightness. If leak continues, remove toilet and check flange height. Use Thetford spacers to adjust, if necessary, to 7/16" above floor. Replace flange seal.

Toilet Does Not Hold Water

Thetford Premium RV Slide-Out Rubber Seal Conditioner often corrects leaks.

1. Check for and remove any debris from blade/ball seal track.
2. Check blade/ball seal compression with mechanism. If blade/ball seal is worn, replace.

Difficult Pedal Operation

Use Thetford Toilet Seal Lubricant and Conditioner on blade/ball to improve operation.

CAUTION To avoid damage, do not use petroleum-based lubricants.

Poor Flush

• Pedal levers must be held fully open during flush.
• A good flush should be obtained within two to three seconds.
• If problem persists, remove the water supply line and check flow rate. The flow rate should be at least 2.5 gallons per minute.

Options

Thetford Toilet Riser

• Increases comfort
• Raises toilet 2.5 inches
• Fits all Aqua-Magics and Bravura

Hand Spray

Easy attachment to existing water valve (Bravura, Aqua-Magic VI, Aqua-Magic Style & Aqua-Magic Residence Only)

Questions?

For parts and/or service, contact a local Thetford Certified Service Center (CSC) or an RV Dealer. For warranty issues or more information, call Thetford's Customer Service Department at: 1-800-543-1219. When you call, please have available:

• Your name and address
• The toilet model and serial number from ID labels
• A brief description of the problem
• Proof of date of purchase