RESISTEX KREA ASYM LED Luminaire Installation Guide

Safety and Maintenance

Safety Notes

• Never work on the fixture when it is live/powered.
• Installation must be performed by a professional installer, respecting electrical installation standards and regulations.
• Risk of electrostatic discharge (ESD Norm). Handle with necessary precautions.
• Please observe the instructions and mounting steps.

Maintenance Instructions

• Do not use chemical or abrasive products to clean the fixture.
• Keep these instructions for removal or future maintenance. Additional information about RESISTEX luminaires can be found on the website www.Resistex-sa.com.
• RESISTEX cannot be held responsible for any misuse of the product.

Certifications and Ratings: ROHS, Class II, IP20, IK08, CRI >80, 5 Years Warranty, CE Mark.

Ceiling Mount (PLAFONNIER) Installation

Step 1: Mounting Bracket

• Attach mounting bracket (item 47) to the fixture using 2x PH1 screws.
• Secure the bracket to the wall/ceiling using 2x PH1 screws and 2x wall plugs (diameter 4mm).
• A connection terminal block with ON/OFF labels is shown.

Step 2: Fixture Attachment

• Attach the fixture to the mounted bracket using 2x PH1 screws.

Step 3: Electrical Connections

• Connect the fixture's wires (Live, Neutral, Earth) to the internal terminal block using a PH1 screwdriver. The terminal block is labeled L, N, and has an Earth symbol.

Step 4: Final Securing

• Secure the fixture with 2x PH1 screws.

Suspension Mount (SUSPENSION) Installation

Step 1: Ceiling Plate and Cable

• Attach a ceiling mounting plate (item 34) to the ceiling using 3x PH1 screws.
• Connect a suspension cable (maximum length 860mm) and a canopy (diameter 60mm). A connection terminal block is also shown.

Step 2: Fixture Connection

• Connect the fixture to the suspension cable and canopy assembly.

Step 3: Electrical Connections

• Connect the fixture's wires (Live, Neutral, Earth) to the internal terminal block using a PH1 screwdriver. The terminal block is labeled L, N, and has an Earth symbol.

Step 4: Final Securing

• Secure the fixture with 2x PH1 screws.

Company Information

RESISTEX EXPLOITATION

11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche - France

Tel: +33 493 276 276 | Fax: +33 493 276 280 | Email: contact@resistex-sa.com

APE: 2740Z | Siret: 487 593 477 00010 | SAS CAPITAL: €649,979 | VAT: FR 73 487 593 477

Website: www.resistex-sa.com