SHEHDS SHE-RCFP9130C LED PAR 9x10W+1x30W
User Manual
Product Overview
Welcome to the SHEHDS LED Par RGB 9*10W+1x30W. This light utilizes energy-saving LEDs and is designed for shockproof, dustproof, and self-running features, producing a variety of vivid lighting effects. It is suitable for all types of entertainment decoration and architectural lighting industries.
The product is controlled via a remote controller or DMX. The main unit features a central LED surrounded by nine smaller LEDs. The remote controller is a RF Remote Controller with various buttons for mode selection, color control, and speed adjustment.
Maintenance
- Keep the light in a dry environment and avoid use in wet places.
- Intermittent use can extend the product's lifespan.
- Regularly clean the fan and lens to ensure optimal ventilating and lighting effects.
- Do not clean the product casing with organic solvents to avoid damage.
Statement and Important Attention Items
The product is shipped in good condition. Users should comply with the warning items and manual. Misuse causing damage is not covered by the guarantee, and the manufacturer is not responsible for malfunctions due to ignoring the manual. Technical changes may occur without prior notice.
Attention Items:
- To ensure product lifespan, do not expose it to wet conditions or temperatures exceeding 40 degrees Celsius.
- Place the product on a stable, fixed surface to prevent it from falling.
- For maintenance, consult a professional to avoid the risk of electric shock.
- The power supply should not fluctuate by more than +/-10% during use. High voltage can decrease lamp life, while low voltage can affect luminosity.
- After powering off, allow the unit to cool for at least 20 minutes before using it again.
- Refer to this manual to ensure the product is used correctly.
DMX Channel Summary (7 Channels Mode)
| Channel | Value | Function |
|---|---|---|
| 1 | Total dimming | R, G, B, W Total dimming, linear dimming, dark to light |
| 2 | R dimming | R Dimming, linear dimming, from dark to light |
| 3 | G dimming | G Dimming, linear dimming, from dark to light |
| 4 | B dimming | B Dimming, linear dimming, from dark to light |
| 5 | W dimming | W Dimming, linear dimming, from dark to light |
| 6 | Function selection | 0-50: Strobe and linear dimming; 51-100: Jump; 101-150: Gradient; 151-200: Pulse variable; 201-255: Voice |
| 7 | Function speed | Corresponding to the speed of the sixth channel function, from slow to fast. |
Display Control Instruction (Remote Functions)
The remote control offers various functions:
- D001: Address code setting (512-001). Keys B and C adjust the address code value.
- Infrared (OFF-B) ON: Power ON/OFF. Key C acts as a selector switch.
- P000: Colorful jump effect. Keys B and C adjust the jump speed.
- L000: Colorful gradient effect. Keys B and C adjust the gradient speed.
- E000: Colorful pulse change effect. Keys B and C adjust the pulse speed.
- Soud: Colorful voice changes.
- R000: Red color selection. Keys C and B adjust brightness.
- G000: Green color selection. Keys C and B adjust brightness.
- B000: Blue color selection. Keys C and B adjust brightness.
- W000: White color selection. Keys C and B adjust brightness.
- F000: Strobe effect. Keys B and C adjust the flicker frequency.
Infrared Function Usage:
When using the infrared function, first enable the infrared keys (IR, ON) on the desired lamp. Other lights should be set to (IR OFF).
Only one console IR (infrared control) can be operated in host mode at a time.
The remote control features buttons labeled A, B, C, D, and E. E represents the LED display. Pressing key A cycles through different function effects. The first two digits on the digital tube indicate the current function, while the last two digits represent address code or speed parameters. Press keys B or C to modify parameter values, and press key D to confirm.
Product Specifications
- Power Supply: AC90-275V, 50-60Hz
- Power Consumption: 120W
- Light Type: LED Par RGB 9*10W + 1x30W
- DMX Channels: 7 DMX Channels
- Shuttle/Flash Rate: 0-10Hz
- Dimmer: 0-100% mechanic dimmer
- Operational Modes: DMX512, Auto Run, Sound action, Strobe, Stand Alone, and Master/Slave, with advanced built-in programs.
- Beam Angle: 25/35/40/45 degrees
- LED Lifespan: More than 60,000 hours
- Weight: 1.5 KG
- Product Size: 20.5x20.5x8 cm
