Manuals+

GREE FLEXX ULTRA R32 Heat Pump Split System

Submittal Data for FXU48HP230V1R32AH / FXU60HP230V1R32AO

48000 BTU/H Unitary Heat Pump Split System

Submittal Data

This section provides fields for project-specific information.

Job Name: [Field for Job Name]

Purchaser: [Field for Purchaser]

Submitted to: [Field for Submitted to]

Unit Designation: [Field for Unit Designation]

Location: [Field for Location]

Engineer: [Field for Engineer]

For: [Field for For]

Schedule No.: [Field for Schedule No.]

Date: [Field for Date]

Images shown:

General Features

Specifications, Features & Function Summary

System Type

Attribute Outdoor Model Indoor Model
Outdoor Model FXU60HP230V1R32A0
Indoor Model FXU48HP230V1R32AH

System Performances

Attribute Unit Values
FXU60HP230V1R32A0 (Min - Max) FXU48HP230V1R32AH (Rated @95°F) FXU60HP230V1R32A0 (Min - Max) FXU48HP230V1R32AH (Rated @47°F) FXU60HP230V1R32A0 (Rated @17°F) FXU48HP230V1R32AH (Rated @5°F)
Cooling Capacity Btu/h 34,000 - 50,000 48,000 34,000 - 52,000 48,000 39,500 48,000
SEER2 19.0
EER2 12.0
HSPF2 10.0
COP @5°F 2.0
COP @47°F 3.4
Cooling Temperature Range °F 5 - 129
Heating Temperature Range °F -22 - 75
Refrigerant Type R32

Indoor Unit: FXU48HP230V1R32AH

Attribute Value Unit
Power Supply 208-230V / 1Ph / 60 Hz VAC
Sound Pressure Level 53 dB(A)
Control Voltage 24 VAC
MOCP 15 A
MCA 7.1 A
Electric Heater (Optional) 6, 9, 12 kW
Air Flow 1200 CFM
External Static Pressure (Up to) 1.0 In W.c.
Dehumidification 8.49 pt/hr
Drain Piping Φ1×0.05 in
External Dimensions (W x D x H) 24-13/16 x 21-1/4 x 52 in
Package Dimension (L x W x H) 27-1/4 x 26 x 54-3/16 in
Net Weight 199.5 lbs
Gross Weight 218.0 lbs

Outdoor Unit: FXU60HP230V1R32AO

Attribute Value Unit
Power Supply 208-230V / 1Ph / 60 Hz VAC
Sound Pressure Level 63 dB(A)
Control Voltage 24 VAC
Rated Current Cooling 30 A
Rated Current Heating 32 A
MOCP 45 A
MCA 39.9 A
Compressor Type GREE G20 / Double Cylinder / 2-Stage Inverter
External Dimensions (W x H x D) 35-7/16 x 49-5/8 x 13-3/8 in
Package Dimension (W x H x D) 40-11/16 x 55-3/16 x 17-3/8 in
Net Weight 241.4 lbs
Gross Weight 263.5 lbs
Refrigerant Charge - R32 162.3 oz
Additional Charge 0.215 oz/ft

Refrigerant Piping

Attribute Value Unit
Line Set Size (Liquid - Gas) - Flared Connections 3/8 - 3/4 in
Pre-Charge Length 31 ft
Pipe Length (Min - Max) 10 - 98 ft
Max. Pipe Elevation 49 ft

Features & Functions Summary

Feature Availability
Ultra Low Frequency Torque Control Yes
Power Factor Correction Yes
Electronic Expansion Valve (EEV) Yes
Basepan With Electric Heater Yes
Compressor With Electric Heater Yes
Fin Coating (Outdoor - Golden & Indoor - Blue) Acrylic Resin
Intelligent Defrosting Yes
Intelligent Preheating Yes
Low Voltage Startup Yes
Memory/Power Failure Recovery Yes
Self Diagnosis Yes
Low Ambient Cooling Yes
24VAC Thermostat Compatible Yes
Indoor Fan Type Centrifugal
Multi Fan Speeds 5 Speeds
Auxiliary Electrical Heater Optional
A2L Leak Detection Sensor (Indoor) Factory Installed

Fan Performance

The Fan Performance chart illustrates the relationship between Airflow (CFM) and Static Pressure (Inches W.C.) for various fan speeds.

Chart Description: A line graph with Static Pressure on the X-axis (0 to 1.0 Inches W.C.) and Airflow on the Y-axis (0 to 2700 CFM). Eight distinct lines represent fan speeds from Speed 1 (CFM) to Speed 8 (CFM), showing decreasing airflow as static pressure increases.
NOTE:

Dimensions

Indoor Unit: FXU48HP230V1R32AH

Diagram shows a rectangular unit with labels A, B, H, W, D indicating dimensions.
Dimension Label Value Unit
A 11-5/8 inch
B 20 inch
H 52 inch
W 24-13/16 inch
D 21-1/4 inch

Outdoor Unit: FXU60HP230V1R32AO

Diagrams show the front, side, and bottom views of the outdoor unit with labels A, B, C, D, E, G indicating dimensions.
Dimension Label Value Unit
A 35-7/16 inch
B 16-1/4 inch
C 49-5/8 inch
D 22-7/16 inch
E 14-7/8 inch
G 13-3/8 inch

Accessory Heater and General Information

Diagram shows a cutaway view of the indoor unit with numbered components:
  1. Centrifugal fan
  2. Secondary drain pan
  3. Refrigerant leakage sensor
  4. Primary drain pan
  5. Evaporator assy
  6. Fan motor
  7. Electric box assy
A label "Power A" is also indicated.

Accessory Heater Specifications (for FXU48HP230V1R32AH)

Model Heat Kit Model Part Number Supply Type Electric Heat (kW) Min. Circuit Ampacity (A) Max Fuse or Breaker (A)
FXU48HP230V1R32AH FLEXA2LHTR06 320004060223 One Mains Supply 3.74 4.6 (208V) / 31 (230V) 33 (208V) / 35 (230V)
FLEXA2LHTR09 320004060224 Two Mains Supply 6.03 (208V) / 7.36 (230V) 13.8 (208V) / 36.9 (230V) 15 (208V) / 40 (230V)
FLEXA2LHTR12 320004060225 Two Mains Supply 7.49 (208V) / 9.2 (230V) 27.5 (208V) / 36.9 (230V) 30 (208V) / 40 (230V)

Clearances

Indoor Unit Minimum Clearance

FRONT: Greater than 24 inches (24").

Diagrams illustrate horizontal left and right configurations for the indoor unit, noting that the right configuration may require relocating the drain pan.
NOTE: Allow a minimum of 24" in front of the unit for service clearance. When installing in an area directly over a finished ceiling (such as an attic), an emergency drain pan is required directly under the unit. See local and state codes for requirements. When installing this unit in an area that may become wet, elevate the unit with a sturdy, non-porous material. In installations that may lead to physical damage (i.e. a garage) it is advised to install a protective barrier to prevent such damage. This air handler is designed for a complete supply and return ductwork system.

Outdoor Unit Minimum Clearance

NOTE: Install the Outdoor Unit 2 Inches Above the Expected Snow Line.

1. When one outdoor unit is to be installed:

A - E Hb H Hd a (in) b (in) c (in) d (in) e (in)
B ≥ 4 - - - - -
A, B, C > 12 ≥ 4 ≥ 4 - - -
B, E ≥ 4 - - - - ≥ 40
A, B, C, E > 12 ≥ 6 ≥ 6 - - ≥ 40
D - - - - - ≥ 40
D, E - - - - - ≥ 40
B, D Hb < Hd ≥ 4 - - - ≥ 40
Hb ≥ Hd ≥ 4 - - - ≥ 40
C Hb ≤ 1/2H - ≥ 10 - ≥ 80 ≥ 40
1/2H < Hb ≤ H - ≥ 10 - ≥ 80 ≥ 40
Hb > H - Prohibited - - -
B, D, E Hb ≤ 1/2H - ≥ 4 - ≥ 80 ≥ 40
1/2H < Hb ≤ H - ≥ 8 - ≥ 80 ≥ 40
Hb > H - Prohibited - - -
Diagram shows a single outdoor unit installation with clearance zones labeled a, b, c, d, e, and dimensions A, B, C, D, E, H, Hb, Hd.

2. When two or more outdoor units are to be installed side by side:

A - E Hb H Hd a (in) b (in) c (in) d (in) e (in)
A, B, C > 12 ≥ 12 ≥ 12 - - ≥ 40
A, B, C, E > 12 ≥ 12 ≥ 12 - - ≥ 40
D - - - - - ≥ 80
D, E - - - - - ≥ 80
B, D Hb < Hd - ≥ 12 - ≥ 80 -
Hb > H - ≥ 12 - ≥ 80 -
B, D, E Hb ≤ 1/2H - ≥ 10 - ≥ 80 ≥ 40
1/2H < Hb ≤ H - ≥ 12 - ≥ 100 ≥ 40
Hb > H - Prohibited - - -
Diagram shows multiple outdoor units installed side-by-side, illustrating clearance zones a, b, c, d, e, and dimensions A, B, C, D, E, H, Hb, Hd.

3. When outdoor units are installed in rows:

Hb H Hd b (in) Clearance (in)
Hb ≤ 1/2H ≤ 10 ≥ 80
1/2H < Hb ≤ H ≤ 12 ≥ 100
Hb > H Prohibited -
Diagram shows outdoor units installed in rows, indicating clearances of ≥ 80, ≥ 160, ≥ 180 inches, and side clearances of ≥ 16 inches, with a note for b ≤ 10 or b ≤ 12.

4. When outdoor units are installed one above another:

Diagram shows outdoor units installed vertically, indicating clearances of ≥ 20 inches (top), ≥ 12 inches (sides), and ≥ 80 inches (bottom).

PDF preview unavailable. Download the PDF instead.

flexx-ultra-r32-submittal-48ah-60ao Adobe InDesign 20.5 (Macintosh) Adobe PDF Library 17.0

Related Documents

Preview GREE FLEXX ULTRA R32 A-Coil Unitary Heat Pump System Specifications
Submittal data and technical specifications for the GREE FLEXX ULTRA R32 60000 BTU/H A-Coil Unitary Heat Pump Split System (FXA60C32AH/FXU60HP230V1R32AO), detailing features, performance, dimensions, and installation clearances.
Preview GREE Flexx Ultra R32 FXA24C32AH / FXU36HP230V1R32AO Submittal Data - 24000 BTU/H Heat Pump
Detailed submittal data sheet for the GREE Flexx Ultra R32 series FXA24C32AH indoor unit and FXU36HP230V1R32AO outdoor unit. Includes specifications, features, dimensions, and installation clearances for this 24000 BTU/H unitary heat pump split system.
Preview GREE FLEXX ULTRA R32 24000 BTU/H Unitary Heat Pump Split System Submittal Data and Specifications
Detailed submittal data, specifications, features, fan performance, dimensions, accessory heater information, and installation clearances for the GREE FLEXX ULTRA R32 24000 BTU/H Unitary Heat Pump Split System, models FXU24HP230V1R32AH and FXU36HP230V1R32AO.
Preview GREE FLEXX ULTRA R32 A-Coil Unitary Heat Pump Submittal Data and Specifications
Detailed submittal data, specifications, dimensions, and installation clearances for the GREE FLEXX ULTRA R32 A-Coil Unitary Heat Pump Split System (FXA48C32AH / FXU60HP230V1R32A0), featuring 48000 BTU/H capacity.
Preview GREE FLEXX ULTRA R32 Heat Pump Submittal Data & Specifications
Detailed submittal data, specifications, dimensions, and clearance requirements for the GREE FLEXX ULTRA R32 36000 BTU/H A-Coil Unitary Heat Pump Split System (FXA36C32AH / FXU36HP230V1R32AO).
Preview GREE FLEXX ULTRA R32 Central Air System | High Efficiency Climate Control
Explore the GREE FLEXX ULTRA R32, a versatile central air system offering exceptional flexibility across all climates. Featuring high SEER2, EER2, and HSPF2 ratings, this system provides efficient cooling and heating for new construction and replacement projects.
Preview GREE FLEXX ULTRA R32 Air Handler Owner's Manual & Installation Guide
Comprehensive owner's manual and installation guide for GREE FLEXX ULTRA R32 Air Handler models FXU24HP230V1R32AH, FXU36HP230V1R32AH, FXU48HP230V1R32AH, and FXU60HP230V1R32AH. Covers safety, operation, installation, maintenance, and troubleshooting.
Preview GREE VIR09HP230V1R32AH/AO 9000 BTU/H R32 Wall Mounted Heat Pump System - Submittal Data & Specifications
Detailed submittal data, specifications, features, dimensions, and clearances for the GREE VIR09HP230V1R32AH/AO 9000 BTU/H R32 Wall Mounted Heat Pump System. Includes technical performance data and installation requirements.