IKEA EKET Cabinet with 4 Compartments

Safety First! ⚠️

Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this, the furniture MUST be permanently fixed to the wall using the provided wall attachment fittings. If the product is to be hung on the wall, it must be done with the designated suspension rail (sold separately at IKEA). Always assess your wall to ensure it will withstand the weight. As wall materials vary, screws for wall fixation are not included. For advice on suitable screw systems for your wall, contact your local specialized dealer. Wall fixing/hanging must be carried out by a qualified person, as incorrect fixation may cause injury or damage.

Parts Included

The following parts are included in the packaging:

• 12x Cam lock screws (139434)
• 12x Cam locks (139435)
• 2x Wooden dowels (152650)
• 2x Plastic caps (152651)
• 1x Back panel
• 4x Side panels
• 2x Shelves
• 1x Top panel
• 1x Bottom panel
• Wall attachment fittings

Assembly Steps

1. Step 1: Prepare the side panels. Insert cam lock screws (139434) into the pre-drilled holes on the side panels.
2. Step 2: Attach the back panel to one of the side panels using the wooden dowels (152650) and cam locks (139435). Ensure the cam locks are tightened securely.
3. Step 3: Connect the second side panel to the back panel and the first side panel, again using dowels and cam locks.
4. Step 4: Insert the central divider panels into the grooves of the assembled frame.
5. Step 5: Slide the shelves into place.
6. Step 6: Attach the top and bottom panels using the remaining cam lock screws and cam locks.
7. Step 7: Carefully fold and insert the back panel into the designated groove.
8. Step 8: Secure the back panel by tapping it into place.
9. Step 9: Attach the plastic caps (152651) to cover any visible cam locks.
10. Step 10: For wall mounting, use the provided wall attachment fittings. Follow the instructions for your specific wall type to ensure secure attachment. This may involve drilling holes and using appropriate screws and wall plugs (not included).
11. Step 11: The cabinet can be assembled with or without legs. If using legs, attach them as shown in the diagrams.
12. Step 12: If mounting the cabinet on the wall, ensure it is level and securely fastened.
13. Step 13: For taller configurations, ensure each unit is securely attached to the wall.
14. Step 14: If the cabinet is to be placed on the floor, ensure it is stable and level.
15. Step 15: If the cabinet is to be stacked or placed next to other units, ensure they are properly secured together and to the wall.
16. Step 16: Attach any additional components or accessories as per the diagrams.
17. Step 17: Final check to ensure all connections are secure and the unit is stable.

Important: Always use the wall anchoring devices provided. If you are unsure about the installation, consult a professional.