Wolf M Series Wall Oven Wiring Diagrams/Schematics
Relay Board Ladder Schematic
This schematic illustrates the relay board ladder for the Wolf M Series Wall Oven. It details the connections for various components including bake elements, convection relays, and broil relays.
Key Components:
- L1 and L2 power input
- Bake Element
- Right Convection Element
- Broil Element
- Left Convection Element
- Bake Relay
- Right Convection Relay
- Broil Relay
- Left Convection Relay
- Bake DLB
- Right Convection DLB
- Broil DLB
- Left Convection DLB
Auxiliary Circuit Ladder
This diagram shows the auxiliary circuit ladder for the Wolf M Series Wall Oven. It outlines the control circuits for fans, lights, and other auxiliary functions.
Key Components:
- L1 and L2 power input
- MDL Relay
- MDL
- Cooling Fan
- Oven Lights
- Left Convection Fan
- Right Convection Fan
- Triac controls for fans and lights
- Aux DLB
Wire Diagram - SO30 M SERIES
This section provides a detailed wire diagram for the Wolf M Series Wall Oven, specifically for models SO30. It includes a comprehensive wire table listing wire colors, source, destination, and termination points.
Diagram Description: The diagram shows the interconnection of various modules including the User Interface Module, Power Control Module, Oven Sensors & Switches, Oven Heating Elements, and Oven Lights & Motors. It details connections for touch sensors, LCD displays, probes, door switches, and heating elements.
Warning: This wiring information is provided for qualified service personnel only. Disconnect appliance from electrical supply before service. Ensure all grounding devices are connected upon completion of service. Failure to observe these warnings may result in severe electrical shock.
Part Number: 9005023 Rev B
Wire Table Highlights:
Wire | Color | From | To | Wire | Color | From | To |
---|---|---|---|---|---|---|---|
1 | BLACK | CONN PI-4 | TERMINAL BLOCK L1 | 41 | RED | CONN J5-9 | TERMINAL BLOCK L2 |
2 | BLACK | CONN P3-4 | TERMINAL BLOCK L1 | 42 | RED | CONN J7-5 | TERMINAL BLOCK L2 |
5 | BLK/YEL | CONN PI-1 | BROIL ELEMENT | 43 | BLACK | CONN J7-1 | TERMINAL BLOCK L1 |
7 | BLK/RED | CONN P3-1 | RIGHT CONVECTION ELEMENT | 53 | RED | CONN J5-8 | BAKE ELEMENT |
9 | BLK/BLU | CONN PI-6 | RIGHT CONVECTION ELEMENT | 54 | RED | CONN LIGHT 2-2 | LIGHT 2 |
10 | RED | CONN P2-6 | BAKE ELEMENT | 55 | RED | CONN LIGHT 3-2 | LIGHT 3 |
15 | BLK/ORG | CONN P3-6 | LEFT CONVECTION ELEMENT | 56 | RED | CONN UPPER LIGHT 3-2 | UPPER LIGHT 3 |
16 | RED | CONN P4-6 | BROIL ELEMENT | 57 | RED | CONN LEFT FAN - 2 | LEFT FAN |
17 | RED | CONN P4-6 | LEFT CONVECTION ELEMENT | 58 | RED | CONN RIGHT FAN - 2 | RIGHT FAN |
21 | RED | CONN P2-4 | SPLICE 1 | 60 | RED | CONN MDL | MDL |
22 | RED | CONN P4-4 | SPLICE 2 | 61 | RED | CONN COOLING FAN | COOLING FAN |
23 | RED | CONN P2-3 | BOTTOM TCO | 90 | GRN/YEL | CONN J7-1 | TERMINAL BLOCK GND |
24 | RED | CONN P2-5 | BOTTOM TCO | 501 | NATURAL | CONN P4-5 | BAKE ELEMENT |
25 | RED | CONN P2-2 | TOP TCO | ||||
33 | BLACK | CONN J5-1 | TERMINAL BLOCK L1 | ||||
34 | YELLOW | CONN J5-2 | CONN LIGHT 1-1 | ||||
35 | YELLOW | CONN J5-3 | CONN LIGHT 2-1 | ||||
36 | YELLOW | CONN J5-4 | CONN LIGHT 3-1 | ||||
37 | BROWN | CONN J5-5 | MDL | ||||
38 | BLUE | CONN J5-6 | CONN RIGHT FAN - 1 | ||||
39 | ORANGE | CONN J5-7 | CONN LEFT FAN - 1 | ||||
40 | VIOLET | CONN J5-8 | COOLING FAN |
Wire Diagram - DO30 M SERIES (Double Oven)
This section provides a wire diagram for the Wolf M Series Double Wall Oven, models DO30. It details the complex wiring for dual oven configurations, including separate controls for upper and lower oven components.
Diagram Description: Similar to the single oven diagram, this illustrates the connections between the User Interface Module, Power Control Module, and various oven components. It highlights separate wiring for upper and lower oven sensors, heating elements, lights, and fans.
Part Number: 9005023 Rev A
Serial Number Usage: For use on Double Ovens starting with serial number 16230892.
Key Differences for Double Oven:
- Separate wiring harnesses and connectors for upper and lower oven components (e.g., UPR PROBE, LWR PROBE, UPR DOOR SWITCH, LWR DOOR SWITCH).
- Dedicated controls and indicators for both upper and lower oven functions.
- Additional relays and triacs to manage the dual oven system.
General Safety and Usage Notes
The provided diagrams are intended for qualified service personnel. Always disconnect the appliance from the power supply before performing any service or maintenance. Ensure proper grounding is maintained throughout the process. Refer to the specific model's user manual for operating instructions and safety precautions.
Related Documents
![]() |
Wolf Wall Oven Wiring Diagrams Detailed wiring diagrams for Wolf Wall Ovens, covering models prior to serial #16000000 and starting with serial #16000000 to #17077136, and starting with serial #17077137. Includes component identification, wire labels, colors, temperature ratings, and connection points. |
![]() |
Wolf Wall Ovens Wiring Diagrams Detailed wiring diagrams and schematic diagrams for Wolf 30" Double Wall Ovens and 36" Single Wall Ovens, including models DO30F/S, DO30U/S, DO30U/P, DO30U/B, SO30, SO36U/S, SO36U/P, and SO36U/B. |
![]() |
Wolf Wall Oven Series Component Access and Removal Guide A comprehensive guide detailing the process of accessing and removing various components of the Wolf Wall Oven Series, including safety precautions and step-by-step instructions. |
![]() |
Wolf Wall Oven Series Electronic Control System Guide A comprehensive guide to the electronic control system of Wolf Wall Ovens, detailing component descriptions, input operations, and various features like Sabbath Mode, Timed Cook, Self-Clean, and diagnostic modes. |
![]() |
Wolf E-Series Wall Oven Troubleshooting Guide This troubleshooting guide provides detailed information for service technicians to diagnose and resolve issues with Wolf E-Series Wall Ovens. It covers diagnostic modes, error history, version information, statistics, and specific problem-solving steps for various oven components and functions. |
![]() |
Wolf Wall Oven Series Component Access and Removal Guide A comprehensive guide detailing the process of accessing and removing various components of the Wolf Wall Oven Series, including safety precautions and step-by-step instructions. |
![]() |
WOLF M Series Wall Oven Technical Data and Specifications Detailed technical data, component ratings, temperature ranges, and relay circuit test points for the WOLF M Series Wall Oven (SWS #22607000). Includes RTD and probe resistance tables. |
![]() |
Wolf Wall Ovens Wiring Diagrams and Schematics Detailed wiring diagrams and schematic diagrams for Wolf 30" and 36" Double Wall Ovens, including models DO30F/S, DO30U/S, DO30U/P, DO30U/B, SO30F/S, SO30U/S, SO30U/P, SO30U/B, SO36U/S, SO36U/P, SO36U/B. |