Great Day Power-Pak ATV Treestand Rack

Model: 558

WARNING: READ ALL INSTRUCTIONS BEFORE USING THE "POWER PAK" ATV TREESTAND RACK. NOTE: Failure to read instructions before use could result in injury or death.

Instructions for Installation:

CONTENTS:

1 - TREESTAND RACK
2 - MOUNTING CHANNELS (ATTACHED TO RACK)
4 - PIECES OF TUBULAR FOAM
4 – CAMO COVERS FOR FOAM
12 - WASHERS
8 - 1/4" LOCKNUTS
4 - 1/4" X 2 1/2" BOLTS
2 - U-BOLTS
2 - LONG MOUNTING PLATES
2 - SHORT MOUNTING PLATES
2 - SECURING STRAPS
4 - 1" NYLON SPACERS

FIG. 1: Components of the Power-Pak ATV Treestand Rack.

STEP 1 - SEE FIG. 2

TO ATTACH TREESTAND RACK TO ATV WITH AFTERMARKET REAR RACK, BOLT THE ATTACHED MOUNTING CHANNELS TO BACK RACK OF ATV USING 2 – U-BOLTS, 2 – SHORT MOUNTING PLATES, 4 – WASHERS & 4 – 1/4" LOCKNUTS.

FIG. 2: Illustrates attaching the rack to an ATV's rear rack using U-bolts and short mounting plates.

STEP 2 – SEE FIG. 3

TO ATTACH TREESTAND RACK TO AN ATV WITH A REAR CARGO RACK, REMOVE MOUNTING CHANNELS FROM TREESTAND RACK AND BOLT THROUGH CARGO RACK USING 4 – 1/4" X 2 1/2" BOLTS & 2 LONG MOUNTING PLATES. TIGHTEN SECURELY.

FIG. 3: Shows attaching the rack to an ATV's rear cargo rack using bolts and long mounting plates.

STEP 3 – SEE FIG. 4

PLACE TREESTAND RACK INTO PADDED SUPPORT BARS AND SECURE WITH 2 – SECURING STRAPS.

FIG. 4: Depicts the completed installation of the Power-Pak ATV Treestand Rack on an ATV.