ViewSonic WPD-900 Wireless Screen Casting Kit User Manual

Introduction

Thank You for Choosing ViewSonic®

ViewSonic®, a leading global provider of visual solutions, is committed to exceeding the world's expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe our products can have a positive impact on the world, and we are confident that the ViewSonic® product you have chosen will be useful to you.

Thank you again for choosing ViewSonic®!

Box Contents

The package typically includes:

• Receiver: A small device designed to connect to a display.
• Transmitter: A small device that connects to your source device (laptop, phone, tablet).

Note: If any items are missing or damaged, please contact your reseller immediately for more information.

Product Presentation

Receiver

Description of Receiver components:

Transmitter

Description of Transmitter components:

Notes:

• Compatible with HDMI 1.4.
• Compatible with USB-A.
• Ensure your device supports video output and power via USB C (USB-C DisplayPort Alternate Mode).
• Diffusion is supported on all laptops, including those running Windows and macOS, as well as Android and Apple devices with DP Alt Mode output.
• Windows/macOS Duplicate and Extend modes are supported.
• To reset to default settings, press the reset button for five (5) seconds.
• HDCP (High-bandwidth Digital Content Protection) is supported for DRM streaming.
• Multiple transmitters can be paired using the same procedure as standard transmitter-to-receiver pairing. A single receiver can be paired with up to eight transmitters.

Connections

Connecting the Receiver

Diagram description: Shows the Receiver connected via HDMI to a projector and via USB-A to the projector's USB port for power.

1. Connect the Receiver's HDMI output to an HDMI port on the projector. Note: Ensure the projector or monitor is also powered on.
2. Connect the Receiver's USB A input to a USB-A port on the projector that can supply 5V/0.5A power.

Connecting the Transmitter

Diagram description: Shows the Transmitter connected via USB-C to a laptop or mobile device.

1. Connect the Transmitter's USB C input to a USB-C port on the diffusion device (e.g., laptop, mobile phone, tablet).
2. Once connected, wait a few seconds for the diffusion device's screen to display automatically.
3. Press the pairing button to enable/disable diffusion while the device is transmitting.
4. The Transmitter's USB C power input port supports direct charging for mobile devices, with a maximum of 60W.

Remarks:

• Ensure your device supports video output and power via USB C (USB-C DisplayPort Alternate Mode).
• Diffusion is supported on all laptops, including those running Windows and macOS, as well as Android and Apple devices with DP Alt Mode output.
• Windows/macOS Duplicate and Extend modes are supported.
• To reset to default settings, press the reset button for five (5) seconds.
• HDCP (High-bandwidth Digital Content Protection) is supported for DRM streaming.
• Multiple transmitters can be paired using the same procedure as standard transmitter-to-receiver pairing. A single receiver can be paired with up to eight transmitters.

Pairing the Transmitter with the Receiver

While it is not necessary to pair the transmitter and receiver out of the box, they can be re-paired in case of connection problems.

1. Connect the receiver to a display device. For more information, refer to the "Connecting the Receiver" section.
2. On the receiver's HDMI output, use a paperclip or SIM card eject tool to press and hold the reset button until an on-screen message prompts you to release it.
3. Follow the on-screen instructions to complete the pairing.

Resetting the Receiver to Default Settings

1. On the receiver's HDMI output, use a paperclip or SIM card eject tool to press and hold the reset button for approximately 15 seconds, then release it.
2. The connected device will restart.

Wireless Streaming (without Transmitter)

The WPD-900 receiver supports point-to-point streaming for Android, Windows, iOS, and macOS. Connect the receiver to power and the display, then follow the steps below to stream content.

Miracast

If your Android devices support Smart View on Samsung, Multi-screen on Huawei, Multi-screen Interaction on OPPO, etc., select the display device directly.

Note: Google devices are not compatible with Miracast.

Diagram description: Shows a "Cast to" interface with a device name "XXXX-12345678".

Windows Extend/Cast

Simultaneously press the "Windows" and "K" keys, then select the display device from the available display devices. You can also press the "Windows" and "P" keys to change display settings to extend the screen.

Diagram description: Shows the Windows key + K key combination leading to an "Available Display" selection with device name "XXXX-12345678".

iOS Screen Mirroring

Swipe and select Screen Mirroring, then choose the display device.

Diagram description: Shows "Screen Mirroring" selection leading to "Screen Mirroring XXXX-12345678".

macOS Extend/Mirroring

Click the icon in your computer's top menu bar and choose to mirror or extend the display to the display device. You can also click "Use As Separate Display" to extend the screen.

Diagram description: Shows macOS display settings with options like "Mirror Built-in Retina Display" and "Use As Separate Display", with device name "XXXX-12345678" and current time "Mon 09:30".

Specifications

¹ Ensure your device supports video output and power via USB C (USB-C DisplayPort Alternate Mode).

Regulatory Information and Services

Compliance Information

This section covers all regulatory requirements and declarations. Corresponding confirmed applications should match the rating plate labels and associated markings on the device.

CE Conformity for European Countries

CE marking

This device complies with Directive EMC 2014/30/EU, Low Voltage Directive 2014/35/EU, and Radio Equipment Directive 2014/53/EU.

EU WEEE Information

The label on the right indicates compliance with Directive 2012/19/EU (WEEE) on the disposal of electrical and electronic equipment. It signifies that this equipment must not be disposed of with municipal waste but should be returned and collected through systems in accordance with local law.

[WEEE symbol: crossed-out wheeled bin]

RoHS2 Declaration of Conformity

This product has been designed and manufactured in accordance with Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive). It is deemed compliant with the maximum concentration values issued by the European Technical Adaptation Committee, as indicated below:

Certain components of the products mentioned above are exempted from Annex III of the RoHS2 directives, as indicated below:

• Copper alloy containing up to 4% lead by weight.
• Lead in solders of type for high-temperature fusion (i.e., lead-based alloys containing at least 85% lead by weight).
• Electrical and electronic components containing lead in glass or ceramic other than dielectric ceramic in capacitors, e.g., piezoelectric devices, or in a glass or ceramic matrix compound.
• Dielectric ceramic conductor in capacitors for a nominal voltage of 125 V AC or 250 V DC or higher.

Indian Substances Restriction

Declaration regarding the restriction of hazardous substances (India). This product complies with the "India E-Waste Rule 2011" regulation and prohibits the use of lead, mercury, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers at concentrations exceeding 0.1% by weight and 0.01% by weight for cadmium, with the exception of exemptions defined in Annex 2 of the regulation.

End-of-Life Disposal

ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of smarter, greener computing. Please visit the ViewSonic® website for more information.

USA and Canada: https://www.viewsonic.com/us/go-green-with-viewsonic

Europe: https://www.viewsonic.com/eu/environmental-social-governance/recycle

Taiwan: https://recycle.moenv.gov.tw/

For EU users, please contact us with any questions regarding safety or an accident involving this product:

ViewSonic Europe Limited
Haaksbergweg 75
1101 BR Amsterdam
Netherlands

+31 (0) 650608655

EPREL@viewsoniceurope.com

https://www.viewsonic.com/eu/

Copyright Information

Copyright© ViewSonic® Corporation, 2025. All rights reserved.

Macintosh and Power Macintosh are trademarks of Apple Inc.

Microsoft, Windows, and the Windows logo are trademarks of Microsoft Corporation in the United States and other countries.

ViewSonic® and the three-bird logo are trademarks of ViewSonic® Corporation.

VESA is a registered trademark of Video Electronics Standards Association. DPMS, DisplayPort, and DDC are trademarks of VESA.

Disclaimer: ViewSonic® Corporation shall not be held responsible for any technical or editorial errors or omissions contained in this document, nor for any direct or indirect damages resulting from the provision of this material or the performance or use of this product.

For continuous product improvement, ViewSonic® Corporation reserves the right to modify product specifications without prior notice. The information contained in this document may change without notice.

No part of this document may be copied, reproduced, or transmitted in any form or by any means, for any reason, without the prior written permission of ViewSonic® Corporation.

Customer Service

For technical support or after-sales service, consult the table below or contact your reseller.

Note: You will need the product serial number.