Device Maintenance
Please remember the following tips when maintaining your Smart Watch:
- Clean the Smart Watch regularly, especially its inner side, and keep it dry.
- Adjust the Smart Watch tightness to ensure proper air circulation.
- Excessive skincare product should not be used for the wrist wearing the Smart Watch.
- Please cease wearing the Smart Watch in case of skin allergy or any discomfort.
Schematic Diagram of Main Body of the Smart Watch
The Smart Watch features a display on the front, and on the back, it has charging contacts and a heart rate sensor.
Introduction of Smart Watch Functions
Switch the menu interfaces of the main screen to access the following functions:
Power-on
Long press the side button for 3 seconds or plug in the magnetic charging cable to charge the Smart Watch.
1. Main Interface Functions
After the smart bracelet and APP are first paired, the time and date of the mobile phone will be synchronized. The watch displays various watch faces, including digital and analog styles, and shows information like time, date, and activity metrics.
2. Step Counting, Distance, and Calorie
The step-counting interface shows steps. Wear the smart bracelet on your wrist, and it will automatically count steps, distance, and calories.
3. Sleep Monitoring
Wearing the smart bracelet at night will automatically judge whether you are in a sleep state, record deep sleep and light sleep respectively, and summarize the total sleep time to help you monitor your sleep quality. The sensor can measure your sleep quality according to the range and frequency of wrist movements when you sleep.
Note: Because user's sleep time and habits are different, sleep monitoring is only for reference.
4. Heart Rate Measurement
Enter the heart rate test interface. The motor will vibrate once after "Start measurement" and "Stop", and the current measurement data will be displayed.
5. Exercise
The sports interface includes a variety of sports modes such as walking, running, cycling, skipping rope, badminton, basketball, football, and so on.
6. AI Voice
Click on the voice function. Through the connection with the mobile phone, the user's spoken language is converted into text, allowing for intelligent dialogue and interaction for instant questions and answers.
7. Phone
Turn on the Bluetooth function of your phone and smartwatch. The phone searches for the smartwatch's Bluetooth device and initiates pairing. When both parties confirm the pairing, a prompt will indicate successful connection. Click the dial pad of the watch to dial and answer the phone.
8. Blood Pressure
Enter the blood pressure test interface. The motor will vibrate once after "Start measurement" and "Stop", and the current measurement data will be displayed. The environment for measuring blood pressure should be quiet with an appropriate temperature. The user should rest for at least 5 minutes and avoid tension, anxiety, and emotional excitement before measurement. Repeatedly measure blood pressure three times at 2-minute intervals. Record the average of three readings.
9. Blood Oxygen
Enter the blood oxygen test interface. The motor will vibrate once after "Start measurement" and "Stop", and the current measurement data will be displayed. Blood oxygen saturation (SpO2) is the percentage of oxyhemoglobin (HbO2) combined by oxygen in the blood to the volume of all hemoglobin (Hb) which can be combined, i.e., the concentration of blood oxygen in the blood.
Note: The data measured for blood pressure and blood oxygen are for reference only, and cannot be used as the basis of relevant medical purposes.
10. Weather
The weather page will display the current weather for today, and swiping up will display the weather forecast for the next 6 days. For weather information, it needs to connect with the client end before data can be obtained. If the disconnection time is long, the weather information cannot be updated.
11. Messages
You can view the content pushed by messages in the information interface. At most five messages can be saved. After five messages are saved, older messages will be replaced by new ones.
12. Shutter
After connecting with the mobile phone, the smart bracelet can be used as a remote controller for the mobile phone camera. Open "Photo control" in the APP, shake the smart bracelet, and click on the camera icon to take a photo.
13. Music Control
After connecting with the mobile phone, the smart bracelet can control the music player on the mobile phone. When the mobile phone plays music, you can use the smart bracelet to control playing/pausing, the previous song, and the next song.
14. Flashlight
After opening, the screen will be adjusted to the maximum brightness and always on. You can exit the interface by swiping left.
15. Game
Three built-in games (Bird, 2048, and Whack-a-Mole) can help you relieve stress.
16. Setting
Click the "Settings" icon (⚙️) to enter the function list, which includes display (brightness, screen time, watch face, menu view, turning the wrist to brighten the screen), sound and vibration, do not disturb, phone: off, save mode, call reset, System (restart, shutdown, factory reset), and about (version, APP download).
17. Drainage
Pull down the shortcut menu on the dial interface, enter the drainage system function, enter the drainage interface, and wait for 3 seconds. The wristband will make a drainage sound, turn the speaker outlet down, and automatically drain water. You can also shake the wristband to speed up the water droplets from flare discharge.
