TP-Link Archer C64: Quick Installation Guide

Getting Started

This guide provides instructions for setting up your TP-Link Dual-Band Wi-Fi Router. It covers two primary modes: Router Mode for a new internet connection and Access Point Mode to extend an existing network.

Router Mode Setup

Follow these steps to connect your modem and router:

1. Unplug your modem.
2. Connect the powered-off modem to the router's WAN port using an Ethernet cable.
3. Power on the modem and wait for it to restart.
4. Connect the router's power adapter.
5. Verify the router's LED indicators are solid.

You can configure the router using either the TP-Link Tether App or a Web Browser. The Tether App allows for a streamlined setup via your smartphone, while the web browser method provides access to more advanced settings.

For detailed steps on using the Tether App or Web Browser, please refer to the respective sections within this guide.

Access Point Mode Setup

To extend your existing network, switch the router to Access Point mode:

1. Power on the router.
2. Connect the router's WAN port to your existing router's Ethernet port.
3. Connect a computer to the new router (wired or wireless).
4. Access the router's web management page via http://tplinkwifi.net.
5. Change the operation mode to Access Point Mode and wait for the router to reboot.

This mode allows the new router to function as a Wi-Fi access point, expanding your network coverage.

Appearance and LEDs

Understand the status of your router by checking the LED indicators for Power, 2.4 GHz, 5 GHz, Internet, and WPS/RESET. The guide provides a table detailing what each LED status signifies in different modes.

Frequently Asked Questions (FAQ)

This section addresses common issues and provides solutions, including:

• What to do if the login window does not appear.
• Troubleshooting internet access issues in Router Mode.
• How to restore the router to factory default settings.
• What to do if you forget your web management or wireless password.

Safety Information

Important safety precautions are provided to ensure proper and safe use of the device. This includes guidelines on keeping the device away from moisture and heat, not attempting to disassemble it, and using only recommended chargers. For service, TP-Link recommends contacting them directly.

For further assistance, community support, or product guides, visit the TP-Link website at https://www.tp-link.com/support.