Quick Installation Guide

Setup Assistance

For setup videos, scan the QR code or visit https://www.tp-link.com/support/setup-video/#wi-fi-routers to find the setup video for your product.

Note: Images may differ from actual products.

Router Mode

If your internet connection comes from an Ethernet outlet, connect the router's WAN port to it. Follow the subsequent steps to complete the hardware connection.

To configure this router as an access point and extend your network, refer to the "Access Point Mode" section.

Hardware Connection

? Important: Unplug your modem and remove its backup battery if it has one.

1. Connect the powered-off modem to the router's WAN port using an Ethernet cable.

   Diagram Description: Shows an Ethernet cable connecting a modem to the router's WAN port.

2. Connect the power adapter to the router and then to a power socket.

   Diagram Description: Shows a power adapter connecting the router to a power socket.

3. Power on the modem and wait approximately 2 minutes for it to restart.

Verify that the following LEDs stay solid on to confirm the hardware is connected correctly:

• Power: ✔️ On
• 2.4GHz: ✔️ On
• 5GHz: ✔️ On
• Internet: ✔️ On

Note: If the 2.4 GHz and 5 GHz LEDs are off, press and hold the WPS/Wi-Fi button on the rear panel for about 5 seconds, then release it. Both LEDs should turn on.

Configure the Router

1. Connect your computer to the router:

   • Wired: Turn off your computer's Wi-Fi and connect it to the router using an Ethernet cable.
   • Wireless:
     • Locate the product label on the bottom of the router.
     • Use the default network names (SSIDs) and password to join the 2.4 GHz or 5 GHz network.
     • Tip: For smartphones or tablets, scan the QR code on the label to join the preset 2.4 GHz network directly.

   Diagram Description: Shows a computer connected to the router via an Ethernet cable, and a smartphone scanning a QR code on the router's label. The label shows example SSIDs (e.g., TP-Link_XXXX, TP-Link_XXXX_5G) and a Wireless Password/PIN.

2. Launch a web browser and enter http://tplinkwifi.net or http://192.168.0.1 in the address bar. Create a password to log in.

   Note: If the login window does not appear, refer to FAQ > Q1.

   Diagram Description: A web browser interface showing input fields for 'Password' and 'Confirm Password', and a 'Start' button.

3. Run the Quick Setup, select "Wireless Router", and follow the step-by-step instructions to set up your internet connection.

Enjoy the internet!

Access Point Mode

In this mode, the router transforms your existing wired network into a wireless one.

Diagram Description: Illustrates Access Point Mode. A 'Wired Router' is connected via Ethernet to the 'Router's' WAN port. The 'Router' then serves 'Client' devices wirelessly.

1. Power on the router.
2. Connect the router's WAN port to your wired router's Ethernet port via an Ethernet cable.
3. Connect a computer to the router via an Ethernet cable or wirelessly using the SSID and Wireless Password printed on the router's label.
4. Launch a web browser and enter http://tplinkwifi.net. Create a password to log in.
5. Run the Quick Setup, select "Access Point", and follow the on-screen instructions to set up the internet connection.

Enjoy the internet!

Range Extender Mode

In this mode, the router boosts the existing wireless coverage in your home.

1. Configure

1. Place the router next to your host router and power it on.
2. Connect a computer to the router via an Ethernet cable or wirelessly using the SSID and Wireless Password printed on the router's label.
3. Launch a web browser and enter http://tplinkwifi.net. Create a password to log in.
4. Run the Quick Setup, select "Range Extender", and follow the on-screen instructions to set up the internet connection.

2. Relocate

Place the router about halfway between your host router and the Wi-Fi "dead" zone. The location must be within the range of your existing host network.

Diagram Description: Shows a 'Host Router' broadcasting a 'Host Network'. The 'Router' is positioned to extend this network to a 'dead zone', creating an 'Extended Network' for 'Devices'.

Enjoy the internet!

Button Explanation

Tether App

The TP-Link Tether app offers a simple, intuitive way to access and manage your router. Scan the QR code to download the Tether app from the Apple App Store or Google Play.

Diagram Description: A QR code for downloading the TP-Link Tether app.

More Features

The TP-Link router supports various features, including Guest Network, Parental Controls, and Access Control. Log in to the router's web management page at http://tplinkwifi.net to configure these functions. For detailed instructions, refer to the user guide at https://www.tp-link.com.

FAQ (Frequently Asked Questions)

Q1. What can I do if the login window does not appear?

1. Reboot your router and try again.
2. If your computer is set to a static IP address, change the setting to obtain an IP address automatically.
3. Verify that http://tplinkwifi.net is correctly entered in the web browser. Alternatively, enter http://192.168.0.1 or http://192.168.1.1 and press Enter.
4. Use another web browser and try again.
5. Disable then re-enable the network adapter being used.

Q2. What can I do if I cannot access the internet?

1. Reboot your modem and router, then try again.
2. Check if the internet is working by connecting a computer directly to the modem via an Ethernet cable. If not, contact your internet service provider.
3. Log in to the router's web management page, go to the Status page, and check if the WAN IP address is valid. If it is, run Quick Setup again; otherwise, recheck the hardware connection.
4. For cable modem users: Log in to the router's web management page, go to Network > MAC Clone, click "Clone MAC Address", click "Save", then reboot both the modem and the router.

Q3. How do I restore the router to its factory default settings?

1. While the router is powered on, press and hold the Reset button on the rear panel until all LEDs turn off, then release the button.
2. Log in to the router's web management page, go to System Tools > Factory Defaults, and click "Restore". The router will restore and reboot automatically.

Q4. What can I do if I forgot my web management password?

Refer to FAQ > Q3 to reset the router, then create a new password to log in.

Q5. What can I do if I forgot my wireless network password?

1. The factory default Wireless Password/PIN is printed on the product label of the router.
2. Connect a computer to the router via an Ethernet cable. Log in to the router's web management page, go to Wireless 2.4GHz (or Wireless 5GHz) > Wireless Security to view or reset your wireless password.

Safety Information

• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device. Contact TP-Link for service.
• Use only recommended chargers.
• Do not use a damaged charger or USB cable.
• Do not use the device where wireless devices are not allowed.
• The adapter should be installed near the equipment and be easily accessible.

Support and Community

For technical support, replacement services, user guides, and other information, please visit https://www.tp-link.com/support, or scan the QR code.

To communicate with TP-Link users or engineers, join the TP-Link Community at https://community.tp-link.com.

©2023 TP-Link. All rights reserved.