D-Link Technical Support Setup Procedure
How to set up DWR-U2000 5G Mobile Hotspot manually using its web GUI?
- Connect your mobile device via Wi-Fi. By default, enter the password located on the label sticker at the back of the router.
- If this is your first time installing the Mobile Hotspot, use a web browser and type in http://192.168.0.1 in the address bar. Enter the Admin Password and click login to start the configuration process. The web address and default admin password are printed on the device label at the bottom of the device. By default, the admin password is admin.
Note: If you have changed the password and cannot remember it, you will need to reset the router to factory defaults.
A screenshot shows the D-Link DWR-U2000 login page with fields for Username and Password, and a Login button. The language can be selected as English.
You will be prompted to the Home Screen.
The Home Screen displays various options: Home, My Wi-Fi, Mobile, Lan, Clients, More. It also shows network status indicators for 4G, SMART, LAN, and devices. System running time and IP address are also displayed.
- Click on Mobile, then click Basic Setup on the left-hand panel. Then, Select the preferred Network Mode (5G/4G/3G, 5G NSA/SA, 5G SA only, 4G/3G, 4G only).
A screenshot shows the Mobile section with Basic Setup selected. Network Mode can be chosen from a dropdown list including 5G/4G/3G, 5G NSA/SA, 5G SA only, 4G/3G, and 4G only. A Save button is present.
- Click Save.
- Select APN. Then, input APN and APN type as required by your carrier. Also the Username and Password (if any).
A screenshot shows the APN configuration screen. Fields include APN, APN Type, Username, Password, Authentication Type, Protocol, and Roaming Protocol. Options for saving or canceling the changes are available.
- Click Save.
