Akko 3068 User Manual

3068 Technical Specifications

3068 HotKeys

The keyboard layout is a standard 60% or TKL-style layout. Key combinations involving the 'Fn' key provide access to additional functions:

General Hotkeys

• Fn + 1-0: Controls media playback (e.g., Play/Pause, Stop, Previous, Next, Mute, Volume Down, Volume Up).
• Fn + -: Mute
• Fn + =: Calculator
• Fn + PgUp: Insert
• Fn + PgDn: Home
• Fn + Home: F1 - F10
• Fn + End: F11, F12

Function Mapping

• Fn + W: Swaps WASD keys with arrow keys (↑, ↓, ←, →).
• Long Press Fn + Right Ctrl: Reverts Ctrl key behavior to Menu (APP) key.

3068 System Commands

The keyboard layout is a standard 60% or TKL-style layout.

• Lock Windows Key: Press Fn + Left Win key.
• Restore Factory Settings: Hold down Fn and press the '~' key.

3068S Single-Color Backlight

*Backlight function is only available on the backlight version of 3068s.

Fn + Del: Cycles through backlight modes: Steady, Breathe, One-key light up, One-key light off, Wave, Ripple, Raindrop.

Fn + [Arrow Keys] / [Other Keys]:

• Fn + ↑: Brighten backlight.
• Fn + ↓: Dim backlight.
• Fn + ←: Set animation direction to left.
• Fn + →: Set animation direction to right.
• Fn + -: Slow down backlight animation speed.
• Fn + +: Speed up backlight animation.

Note: Some lighting effects may only support brightness adjustment and not speed or direction.

Akko Macro V1.0 Macro Setup Instructions

Macro Setup Instruction 1

1. Akko Macro V1.0 is hardware-based and works without software-driven.
2. The following keys cannot be programmed: "Esc", "Fn", "Left Win".
3. Press and hold Fn + Win for 3 seconds to switch to the Macro mode. When the keyboard is re-connected or the system is restarted, the Macro mode will be exited. You need to switch to the Macro mode again to use programmed keys.
4. Akko Macro V1.0 does not support simultaneous trigger; pressing "AB" at the same time will trigger the keys in the order of A followed by B.
5. Akko Macro V1.0 does not support customized interval time; the trigger interval between key A and key B cannot be defined and will follow the system's default trigger time.

Macro Setup Instruction 2 (Flowchart)

The macro setup process is as follows:

• Enter Macro Mode: Long Press Fn + Left Win.
• Start Macro Editor: Press Fn + Esc.
• Fn + Custom Key: Select a key to start custom recording.
• Macro Recording: Press the keys to store.
• Fn + Custom Key: End recording for the current key.
• Record the next Key: The system is ready to record the next key.
• Long Press Fn + Custom Key: Clear the macro for the selected key.
• Exit Macro Mode: Back to Default Mode by Long Pressing Fn + Left Win.
• Exit Macro Editor: Press Fn + Esc.

Macro Setup Instruction 3 (Example: Define "A" as "AKKOGEAR")

1. Press Fn + Left Win for 3 seconds to enter the Macro mode.
2. Press Fn + ESC to launch the Macro editor.
3. Press Fn + A to select key "A" for recording.
4. Press A, K, K, O, G, E, A, R in order as the replacement definition for "A".
5. Press Fn + A again to end the Macro recording for key "A".

At this point, pressing "A" in a text editor will display "AKKOGEAR". To create a macro for key "B", press Fn + B to start the Macro recording.

6. Press Fn + Esc to exit the Macro editor.
7. Press and hold Fn + Left Win for 3 seconds to exit the Macro mode and return to the default key definition.

Akko Warranty and Service Statement

1. Akko provides a 1-year warranty for customers in mainland China for non-man-made damage, starting from the purchase date.
2. If the warranty period expires, customers may be charged for repairs. Akko can provide repair instructions for self-repair, but users assume full responsibility for any loss during self-repair.
3. Disassembling the keyboard without manufacturer/seller's instruction will immediately void the warranty.
4. Return and warranty policies may vary across different platforms and are subject to the specific distributor at the time of purchase.

Precautions

Man-made damage includes, but is not limited to, immersion in liquids, dropping from heights, and excessive force applied to the cable. As the keyboard is an electronic product, please handle it with care according to electronic product protection guidelines.

After-sales Service Phone: 0755-27728007

After-sales Service QQ: 981572876

*Official after-sales service hours are Monday to Friday, 10:00 AM to 6:00 PM. Holidays follow national regulations.

*After-sales service time may vary due to uncontrollable factors such as repair time, logistics, and parts procurement. Evaluation will be based on the actual damage situation. Users are requested to wait patiently.