Akko 3068 BT5.0 Mechanical Keyboard User Manual

Product Overview

This document provides detailed instructions and specifications for the Akko 3068 BT5.0 mechanical keyboard.

3068 Technical Specifications

3068 HotKeys

The keyboard features various hotkey combinations for enhanced functionality. Below is a summary:

A visual representation of the keyboard layout is provided in the original document, highlighting the keys involved in these combinations.

3068 System Commands

Control system functions with these key combinations:

3068 Backlight Settings

Adjust the keyboard's backlighting using the following combinations:

Note: In Bluetooth mode, the backlight is turned off by default to save power. Press Fn + L to turn it on.

3068 Bluetooth Feature Overview

Understanding the LED indicators for Bluetooth connectivity:

3068 Bluetooth Setup Instructions

1. Switch to Bluetooth Mode

Long press Fn + Tab. The Tab LED will flash, indicating Bluetooth mode is active.

2. Set the Bluetooth Profile

The keyboard supports 4 switchable Bluetooth profiles (BT1/BT2/BT3/BT4) via Fn+E/R/T/Y. For first-time use, select a profile to initiate device searching. The keyboard memorizes the last connected device.

3. Bluetooth Pairing

Ensure Bluetooth is enabled on your PC/PAD/iPhone. The keyboard will appear in the Bluetooth list based on the selected profile (e.g., Akko 3068BT-1, Akko 3068BT-2, etc.).

4. Switch Bluetooth Device

After pairing up to 4 devices, switch between them by long pressing Fn+E, Fn+R, Fn+T, or Fn+Y for at least 3 seconds.

5. Shut Off the Keyboard

Turn off the power switch on the keyboard's back panel when not in use to save battery. The keyboard enters sleep mode after 10 minutes of inactivity and can be woken by pressing any key. Note: Windows power-saving modes may affect sleep activation time.

6. Reset the Keyboard

If you forget paired devices or encounter Bluetooth connection issues, press Fn + ~ to reset the keyboard. This erases all stored pairing information.

Akko Macro V1.0 Macro Setup Instructions

Macro Setup Instruction 1

Akko Macro V1.0 is hardware-based and does not require software. The following keys cannot be programmed: "Esc", "Fn", and "Left Win". Macros do not support simultaneous triggers (e.g., pressing "AB" simultaneously will trigger A then B). Custom interval times between keys are not supported; the system's default trigger time will be used.

Macro Setup Instruction 2 (Flowchart Description)

The process for setting up macros is as follows:

1. Enter Macro Mode: Long press Fn + Left Win.
2. Start Macro Editor: Press Fn + Esc.
3. Select Key: Press Fn + Custom Key (e.g., Fn + A).
4. Macro Recording: Press keys to store the macro sequence.
5. End Recording: Press Fn + Custom Key again.
6. Record Next Key: Repeat steps 3-5 for other keys.
7. Exit Macro Editor: Press Fn + Esc.
8. Exit Macro Mode: Long press Fn + Left Win to return to default mode.

Clear Macro:

To clear a macro from a key: Enter Macro Mode, then press Fn + the key. To re-customize, press Fn + the key again after clearing.

Macro Recording Example: Define "A" as "AKKOGEAR"

1. Enter Macro Mode: Long press Fn + Left Win for 3 seconds.
2. Launch Macro Editor: Press Fn + Esc.
3. Select Key: Press Fn + A to choose key "A".
4. Record Sequence: Press keys A, K, K, O, G, E, A, R.
5. End Recording: Press Fn + A again.

Now, pressing "A" in a text editor will output "AKKOGEAR". To macro key "B", press Fn + B.

Exit Macro Editor by pressing Fn + Esc. Exit Macro Mode by long pressing Fn + Left Win for 3 seconds.

Akko Macro V1.0 Calling Macros

Method A: Enter Macro Mode (Fn + Left Win). All keys function with customized definitions. The Win key can be unlocked with Fn + Win. Note: Macro mode deactivates upon reboot or replugging the cable; re-enter Macro Mode to reactivate.

Method B: In default key mode, call customized macros using Fn + Right Alt + the key. Ensure to press Fn first, then Alt.

Akko Warranty and Service Statement

Akko provides a 1-year warranty for customers in mainland China from the date of purchase, covering non-human-induced damage. For other regions, contact your local seller or Akko distributor.

• If the warranty expires, repair services are available at a fee based on market average prices.
• Disassembling the keyboard without manufacturer/seller instructions voids the warranty.
• Return and warranty policies may vary by platform and distributor.

Precautions

Human-made damage includes, but is not limited to, immersion in liquids, dropping the keyboard, or excessive force on cables. Handle the electronic product with care.

Customer Service:

• After-sales Phone: 0755-27728007
• After-sales QQ: 981572876

Official service hours are Monday to Friday, 10:00 AM to 6:00 PM (Beijing time), excluding national holidays. Service times may vary due to uncontrollable factors like repair, logistics, and parts procurement.