Akko 3061 Mechanical Keyboard User Manual

Product Specifications

Hotkeys

The following are common Fn key combinations for the Akko 3061 keyboard:

System Commands

These key combinations control system-level functions:

• Fn + W (Long press 3S): Swap WASD keys with Arrow keys (↑↓←→).
• Fn + Right Win + R (Long press 3S): Switch the right Win key to become the Menu key. Press and hold again to switch back to the Win key function.
• Left Win + Right Win (Long press 5S): Restore to factory settings.
• Fn + Left Win / Right Win: Press once to lock the Win key. Press again to unlock.

3061S Single-Color Backlight Features

*Backlight function is only available on the 3061S backlight version.

Akko Macro V1.0: Macro Setup Instructions

Instruction 1: Overview

1. Akko Macro V1.0 is hardware-based and works without software drivers.
2. The following keys cannot be programmed: "Esc", "Fn", "Left Win", and "Right Win".
3. To switch to Macro mode, press and hold Fn + Win for 3 seconds. Macro mode will exit if the keyboard is re-connected or the system is restarted; you will need to switch to Macro mode again.
4. Akko Macro V1.0 does not support simultaneous trigger; pressing "AB" at the same time will trigger the keys in the order of A followed by B.
5. Akko Macro V1.0 does not support customized interval time; the trigger interval between key A and key B cannot be defined and will follow the system's default trigger time.

Instruction 2: Macro Recording Process

The process for setting up macros is as follows:

• Enter Macro Mode: Long Press Fn + Left Win
• Start Macro Editor: Fn + Esc
• Select Key for Macro: Fn + Custom Key
• Macro Recording: Press Keys to Store
• End Recording: Fn + Custom Key
• Record the next Key

After recording a key, you can choose to:

• Exit Macro Mode: Back to Default Mode
• Exit Macro Editor: Fn + Esc

Clear Macro: If a key has been defined, after entering the Macro editor, you can press "FN + the key" to clear its definition. If you want to re-customize that key, press "FN + the key" again to start the new Macro recording after clearing its old definition.

Instruction 3: Macro Recording Example

Example: Define “A” as “AKKOGEAR”

1. Step 1: Press Fn + Left Win for 3 seconds to enter the Macro mode.
2. Step 2: Press Fn + ESC to launch the Macro editor.
3. Step 3: Press Fn + A. This selects key “A” for recording.
4. Step 4: Press A, K, K, O, G, E, A, R in sequence as the replacement definition for “A”.
5. Step 5: Press Fn + A again to end the Macro recording for key “A”. At this point, pressing “A” in a text editor will display “AKKOGEAR". If you wish to create a Macro for key “B”, press Fn + B to start the Macro recording for “B”.
6. Step 6: Press Fn + Esc to exit the Macro editor. While in Macro mode, you can configure your keys and macros.
7. Step 7: Press and hold Fn + Left Win for 3 seconds to exit the Macro mode and return to the default key definition.

Akko Warranty and Service Statement

1. Akko provides a 1-year warranty for customers in mainland China, covering non-man-made damage from the date of purchase. For other regions, please contact your seller (Akko distributor) for specific warranty policy.

2. If the warranty period expires, customers will need to pay for repairs. Akko can also provide repair instructions if users prefer to perform self-repairs. However, users assume full responsibility for any loss or damage incurred during self-repair.

3. Disassembling the keyboard without manufacturer/seller's instructions will immediately void the warranty.

4. The return and warranty policy may vary across different platforms and are subject to the specific distributor's terms at the time of purchase.

Precautions: Man-made damage is not limited to immersion in liquids, dropping from heights, or pulling wires with excessive force. As this is an electronic product, please handle it with care according to its protection methods.

Service Phone: 0755-27728007

Service QQ: 981572876

Official service hours are Monday to Friday, 10:00 AM to 6:00 PM, excluding national holidays.

Please note that service times may vary due to uncontrollable factors such as repair duration, logistics, and parts procurement. Service will be assessed based on the actual damage situation. Your patience is appreciated.

Online Presence

Visit Akko online:

• Website: www.akkogear.com
• Instagram: instagram.com/akkogear
• Facebook: facebook.com/akkogear
• Twitter/X: @akkogear.de