Laifen Wave Electric Toothbrush Quick Start Guide
Selecting the Right Brush Head
Gum Care (CS)
Gentle cleaning for comfortable daily brushing
Super-Clean (GS)
High-efficiency cleaning that leaves teeth feeling fresher
Ultra-Whitening (US)
Powerful cleaning that whitens and polishes teeth
The Laifen Wave Electric Toothbrush comes with three distinct brush heads: Gum Care (CS) for gentle daily cleaning, Super-Clean (GS) for efficient cleaning, and Ultra-Whitening (US) for whitening and polishing.
Startup & Mode Selection
Step 1: Attach Brush Head
Attach your selected brush head to the toothbrush handle. Note: A 1mm gap between the handle and brush head is present to reduce vibrations.
Step 2: Disable Flight Mode
Long press the power button for 2 seconds to disable Flight Mode. Apply light pressure when pressing the button.
Step 3: Operation
Press the power button once to turn the toothbrush on or pause it. Press the button twice to switch between modes.
Available Modes:
- Mode 1
- Mode 2
- Mode 3
If the toothbrush is paused for 10 seconds, it will automatically enter Sleep Mode. For detailed information on modes, please refer to the User Manual.
Customizing Personalized Modes
Using the Laifen App
Step 1: Download App
Scan the QR code provided to download and install the Laifen app from your device's app store (available for Android and iOS).
Step 2: Ensure Toothbrush is On
Make sure the toothbrush is powered on and the power indicator light is illuminated. Refer to the User Manual if you encounter difficulties connecting with the Laifen App.
Step 3: Find and Link Device
Open the Laifen app and tap the "+" icon to search for your device. Select the device named LFTB01-X-XXXX to link it, where XXXX represents the unique device ID number.
Step 4: Customize Modes
Personalize your brushing experience by adjusting the Vibration Strength, Oscillation Range, and Oscillation Speed within the app.
Scientific Brushing Method
Step 1: Prepare and Start
Apply a small amount of toothpaste to the brush head and wet it with water. Turn on the toothbrush only after placing it inside your mouth to prevent toothpaste from splashing.
Step 2: Brushing Technique
Position the toothbrush at the gum line, tilting it upwards at a 45° angle. Gently guide the toothbrush, allowing it to rest on each tooth for a few seconds.
Step 3: Timing and Transition
The toothbrush will vibrate every 30 seconds to signal a change in brushing area. This feature can be enabled via the Laifen App. After 2 minutes of brushing, the toothbrush will automatically enter Sleep Mode.
Step 4: Rinse
After completing your brushing routine, rinse your mouth thoroughly with water.