MAULviso 826 34 LED Magnifying Lamp
Product Overview and Removal Instructions
Product Description
The MAULviso 826 34 is an LED magnifying lamp designed for various applications requiring detailed illumination and magnification. It features an articulated arm for flexible positioning and a clamp base for secure attachment to surfaces.
The lamp utilizes LED technology for efficient and bright lighting.
Key Components Identified:
- MAULviso 826 34 Magnifying Lamp
- LED Ring Module (Art.-No.: 8263409.200)
- Driver/Power Supply Circuit Board (Art.-No.: 8263409.210)
Component Identification
LED Ring Module
A circular LED module is used as the light source for the magnifying lamp. It is identified by the article number Art.-No.: 8263409.200.
Visual Description: A circular printed circuit board populated with multiple LED chips, connected via wires.
Driver/Power Supply Circuit Board
This circuit board manages the power supply to the LED module. It is identified by the article number Art.-No.: 8263409.210.
Visual Description: A rectangular circuit board containing electronic components such as capacitors, resistors, and connectors.
Removal and Disassembly Instructions
The following steps outline the process for disassembling the MAULviso 826 34 magnifying lamp, focusing on accessing and potentially removing key components like the LED ring or driver board.
Step 1: Accessing the Lamp Head Interior
To begin accessing the internal components, the outer casing of the lamp head needs to be opened. This typically involves removing screws securing the lens or housing.
Visual Description: The image shows the lamp head with several screws circled in red, indicating the points of disassembly.
Required Tool: A PH1 screwdriver is needed for this step.
Step 2: Disconnecting the LED Module and Driver Board
Once the lamp head is opened, internal connections can be accessed. The LED module and the driver board are connected via wiring harnesses.
Visual Description: The image displays the interior of the lamp head, showing the circuit board and connectors. Two specific actions are indicated:
- "DRÜCKEN PUSH a)": This instruction refers to pressing a specific connector (labeled 'a') to release it.
- "ZIEHEN PULL b)": This instruction indicates pulling a connector (labeled 'b') to disconnect it.
The LED ring module is shown separately, connected by wires.
Required Tool: A PH0 screwdriver is indicated for working with internal components, potentially for securing or releasing parts.
Step 3: Further Disconnection (if applicable)
Additional disconnection steps may be required depending on the specific component being serviced.
Visual Description: The image shows a connector labeled "ZIEHEN PULL b)", indicating a pull-to-release mechanism for a cable connection.
Required Tool: A PH0 screwdriver is shown, likely for stabilizing or assisting in the disconnection process.
Manufacturer Information:
The product is manufactured by MAUL, Jakobs KG, located in Germany. The product bears CE and WEEE compliance marks.
Safety Note: The document includes a symbol indicating safe usage, often depicted as a person reading, suggesting careful handling and adherence to instructions.
