Lightolier Lytecaster 1076 Recessed Downlighting
Series: Lytecaster 1076
Product Type: 5" Aperture Basic Baffle Reflector Trim
The complete fixture consists of a Reflector Trim and a Frame-In Kit, which must be selected separately.
Reflector Trim Options
- 1076 Matte Black
- 1076WH Gloss White
Frame-In Kit Specifications
Refer to individual Frame-In Kit specification sheets for detailed information.
| Reflector Trim | Frame-In Kit | Installation Type | Lamping | Height | Frame-In Kit | Installation Type | Lamping | Height |
|---|---|---|---|---|---|---|---|---|
| 1076 Matte Black | 1002P1 | Non-IC | 60W A19 75W PAR30* 75W BR30 |
6 3/4" | 1001F13U Series | UniFrame™ Non-IC | (1) Triple 13W (GX24q-1) | 5 7/8" |
| 1076WH Gloss White | 1003R | Non-IC Remodeler | 60W A19 75W PAR30* 85W BR30 |
6 3/4" | 1001F18U Series | UniFrame™ Non-IC | (1) Triple 18W (GX24q-2) | 5 7/8" |
| 1000IC 1000AICM |
IC IC AirSeal® |
40W A19 75W PAR30 |
7 5/16" | 1004F13 Series | IC | (1) Quad/Triple 13W (GX24q-2) | 7 1/2" | |
| 1004ICX/N | IC AirSeal® | 40W A19 75W PAR30* 65W BR30 |
7 1/4" | 1004F18** Series | IC | (1) Quad/Triple 18W (GX24q-2) | 7 1/2" | |
| 1004IC/N 1004ICR |
IC IC Remodeler |
50W PAR30 60W BR30 |
7 1/2" | 1004F26** Series | IC | (1) Quad/Triple 26W (GX24q-2) | 7 1/2" | |
| 1004IC/N 1004ICR |
Non-IC Non-IC Remodeler |
65W BR30 50W PAR30 40W A19 |
7 1/2" | 1001F13ICU/N | Performance IC | (1) Triple 13W (GX24q-1) | 7 1/4" | |
| 1004SIC/N 1004SICR |
IC IC Remodeler |
50W PAR30* 60W BR30 |
5 1/2" | 1001F18ICU/N | Performance IC | (1) Triple 18W (GX24q-2) | 7 1/4" | |
| 1004SIC/N 1004SICR |
Non-IC Non-IC Remodeler |
75W PAR30* 75W BR30 |
5 1/2" |
* Use Socket Extender with Short Neck.
** Lightolier recommends the use of triple tube lamps.
Features
- Reflector: Hydroformed aluminum, .040" thick (18 ga.). Features a non-yellowing, scratch-resistant Perma White finish with 88% reflectance. Includes a white trim flange.
- Step Baffle: Molded high-heat plastic with a stepped conical surface for low brightness. Available in matte black or gloss white finish.
- Frame-In Kit: The 1002P1 standard frame is shown. Other frames are listed above and illustrated. Consult Frame-In Kit specification sheets for more details.
Options & Accessories
- Medium-Base PAR30 Socket Extender: Part number 1968. For use with short neck PAR30 lamps in P1 and Lytening housings.
Labels
- UL (Suitable for Damp Locations)
- I.B.E.W.
Illumination Calculation Guidance
Use the quick calculator chart to determine the spacing of 75 Watt PAR30 FL units (Black) for a desired level of illumination.
Conversion Factors:
- 75W PAR30 FL, White, Footcandles (F.C.) x 1.1
- 75W PAR30 FL, White, Coefficients of Utilization (C.U.) x 1.1
- 65W BR30 FL, Black, C.U. x 0.75
- 65W BR30 FL, White, C.U. x 1.0
To convert lighting data for a lower wattage incandescent lamp of the same type, multiply the footcandle (or candlepower) values by the ratio of the lumens of the two lamps. The coefficients of utilization remain the same.
Spacing Ratio = 0.7
Diagram Description: A graph shows Average Initial Footcandle on the Y-axis and Area per Fixture in Square Feet on the X-axis, with a secondary X-axis for Center to Center Distance of Fixtures in Feet. Two curves are plotted for different Room Cavity Ratios (RCR), indicating illumination levels based on fixture spacing.
Diagram Description: A polar candelabra distribution curve shows light intensity across different angles for a 75W PAR30 Flood Lamp. A table summarizes Mean CP and Lumens across various angles. Another table details Zonal Lumens and Percentages, indicating the distribution of light in different zones. The efficiency is noted as 87.2%.
Job Information
Job Name:
Type:
Cat. No.:
Lamp(s):
Notes:
