Anjank AC209 User Manual

Product Overview & Specifications

The Anjank AC209 is a multi-functional device that includes a Bluetooth speaker, a white noise machine with 20 soothing sounds, an alarm clock, and a 7-color night light. It offers features such as 30-level volume control, 8 ringtones, 0-100% display dimmer, 0-100% night light dimmer, 12/24H mode, 9-minute snooze, sleep timer, and battery backup for memory functions.

Power Specifications:

• AC: 100-240V, 50-60Hz, 0.2A
• DC: 5V-1A, 24W, Class 2

Package Includes:

• 1* White Noise Machine
• 1* Adapter with cord
• 1* CR2032 button cell
• 1* User Manual

Features:

• Bluetooth Speaker
• 20 Soothing Sounds
• 30-level Volume Control
• Alarm Clock
• 8 Ringtones
• 7-Color Night Light
• 0-100% Display Dimmer
• 0-100% Night Light Dimmer
• 12/24H Mode
• 9 Minutes Snooze
• Sleep Timer
• Battery Backup (Memory function only)

Getting Started

Initial Setup:

1. Plug the adapter into a standard household outlet. The display will show '88:88', indicating the machine is ready to be set.
2. Pull out the insulator sheet from the battery compartment. The backup battery preserves time and alarm settings during power outages.

Important Notices:

• If the display is blank after plugging in, check if the 'Display Dimmer' on the back is set to a high position.
• The device is not battery-powered. The battery only preserves settings during power outages. The screen will be blank if only using battery power. Keep the device plugged in.

Device Layout

Front View: Displays time, alarm indicator, and Bluetooth indicator.

Back View: Features Volume Up (+), Volume Down (-), Music Play/Pause (♫), Bluetooth (BT), Night Light, Display Dimmer, and Light Dimmer controls.

Top View: Includes SNOOZE, 12/24H, and Mode buttons.

Sound and Bluetooth Features

Sound Selection:

• Press the [Sound] button to switch the sound mode on/off.
• Press the [Previous Track/-] or [Next Track/+] buttons to cycle through the 20 available sounds.

Wireless Speaker Pairing:

1. Long press the [BT] button to turn the wireless speaker on/off. The 'BT' icon will blink during pairing mode.
2. Enable Bluetooth on your phone and select 'AC209' from the list of available devices. The 'BT' icon will remain lit after successful pairing.
3. Use the [Previous Track/-] or [Next Track/+] buttons to play previous or next tracks, or press the [BT] button to pause playback.
4. Use the [+] or [-] buttons, or your phone's controls, to adjust the speaker volume.

Notices for Bluetooth:

• The AC209 automatically connects to the last paired phone when the Bluetooth speaker turns on. If no previous connection exists, it enters pairing mode.
• Long press the [BT] button to disconnect the current Bluetooth device and re-enter pairing mode (the 'BT' icon will blink).
• Maintain a distance of no more than 15 meters (49ft) between the speaker and your phone.

Time and Alarm Settings

Auto Time Setting:

• When connected via Bluetooth, the clock automatically syncs with your phone's time.
• Press the [12/24H] button to change the hour format.

Manual Time Setting:

1. Press the [Time Set] button to enter HOUR setting. Use the [+] or [-] buttons to adjust the hour.
2. Press the [Time Set] button again to confirm and enter MINUTE setting. Use the [+] or [-] buttons to adjust the minute.
3. Press the [Time Set] button once more to confirm and enter the 12/24 hour mode setting. Use the [+] or [-] buttons to select.
4. Press the [Time Set] button to finish the time setting.

Note: When the Bluetooth speaker is active, manual time setting is limited to switching between 12/24 hour formats using the [12/24H] button.

Alarm On/Off:

• Long press the [Alarm] button to turn the alarm on or off. The alarm icon will disappear from the display when the alarm is off.

Alarm and Ringtone Setting:

1. Press the [Alarm] button to enter HOUR setting. Use the [+] or [-] buttons to set the hour.
2. Press the [Alarm] button to confirm and enter MINUTE setting. Use the [+] or [-] buttons to set the minute.
3. Press the [Alarm] button to confirm and enter RINGTONE setting. 'P01'-'P08' will be displayed, corresponding to different alarm sounds (P01-Beep, P02-Piano, P03-Bird Chirp, P04-Sea Wave, P05-Stream, P06-Music Box, P07-Yoga Music, P08-Meditation Music). Use the [+] or [-] buttons to select a ringtone and adjust its volume.
4. Press the [Alarm] button to finish the alarm setting.

Alarm Pause / Snooze:

• When the alarm sounds, press any button except SNOOZE to stop it. The alarm will sound again the next day.
• Press the SNOOZE button to activate snooze. The snooze icon [?] will blink. The alarm will sound again in 9 minutes. To cancel snooze, press the [0] button, and the alarm will not sound for the rest of the day.

Alarm Duration: The alarm will ring for 1 hour with the alarm icon flashing and the night light on. After 1 hour, the alarm and light will turn off, but the alarm icon will remain, indicating the alarm will not sound again that day.

Night Light and Dimmer Controls

Night Light Setting:

• Press the [Light] button to turn the night light on or off.
• Press the SNOOZE button to cycle through the available colors for the night light.

Dimmer Control:

• The 'Display Dimmer' dial and 'Light Dimmer' dial are located on the back of the unit.
• Brightness for both the display and the night light can be adjusted from 0% to 100%.

Sleep Timer

Sleep Timer Setting:

1. With the machine on, repeatedly press the [Sleep Timer] button to select a timer duration: 1H, 2H, 3H, 4H, or OFF. The corresponding indicator light will illuminate. The timer starts automatically after 5 seconds of inactivity.
2. Press the [Sleep Timer] button to select OFF to disable the timer.
3. While the sleep timer is active, press the [Timer Check] button [☑] to view the remaining time. Press it again to reset the timer.

Note: When the sleep timer is active, music volume and night light brightness will gradually decrease in the last minute before the timer expires.

Support

If you encounter any issues with the Anjank AC209, please contact customer support at customer@kerweilai.com. Issues will be addressed within 24 hours.

FCC Requirement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.