DOSS SoundBox Wireless Portable Bluetooth Speaker
Model No.: DOSS SoundBox
Packing Content
- DOSS SoundBox Wireless Speaker
- USB Type-C Charging Cable
- User Manual
Product Overview & Controls
The DOSS SoundBox is a wireless portable Bluetooth speaker designed for versatile audio playback.
Key Controls:
- Mode Button: Touch to switch between Bluetooth, TF card, and Aux-in modes.
- Backward Skip Button: In Bluetooth or TF card mode, touch to skip to the previous track.
- Play/Pause & Handset Button:
- In Bluetooth mode: Touch to answer/end a call. Touch and hold for 3 seconds to reject a call. Speak into the built-in microphone on the front. Touch to play/pause music. Touch and hold for 5 seconds to disconnect from your device.
- In TF card mode: Touch to play/pause music.
- Forward Skip Button: In Bluetooth or TF card mode, touch to skip to the next track.
- Volume Control Button: Rotate clockwise to increase volume, counter-clockwise to decrease volume.
- Power Button: Long press to turn the speaker on or off.
Ports & Features
- Aux-in Port: Play audio via a 3.5mm auxiliary cable (not included). Audio playback is controlled by your connected device.
- TF Card Slot: Play audio files (MP3, WMA, FLAC) from a TF card (max capacity 32GB, FAT32 or FAT format). Files play in download order.
- Type-C Charge Port: For charging the speaker.
- Charging Indicator: Shows charging status.
Indicators
Top Center Indicator:
- Flashing blue: Bluetooth pairing
- Steady blue: Bluetooth connected
- Steady red: Aux-in mode
- Steady green: TF card mode
Charging Indicator:
- Steady red: Charging
- Steady green: Fully charged
Pairing DOSS SoundBox with Your Device
- Place the speaker and your device within one meter.
- Turn on the speaker. The top center indicator will flash blue.
- Turn on Bluetooth on your device and select "DOSS SoundBox" from the list.
- Once paired, a prompt tone will sound, and the top center indicator will turn solid blue. If pairing fails, repeat steps 1-3.
- To disconnect, press and hold the Power button for 5 seconds.
Connecting DOSS SoundBox to Echo Dot
You can connect the speaker to an Echo Dot via Bluetooth or auxiliary cable.
- Download the Alexa app and connect your Echo Dot to your home Wi-Fi network.
- Ensure the DOSS SoundBox is in pairing status (press and hold the Power button for 5 seconds if it's already paired).
- Open the Alexa app, tap MENU, then SETTINGS.
- Tap your Echo Dot in the Alexa app, then tap BLUETOOTH.
- Select "DOSS SoundBox" from the Bluetooth list. If it doesn't appear, press and hold the Power button for 5 seconds and try reconnecting.
Specifications
| Feature | Specification |
|---|---|
| Output Power | 6W x 2 |
| Driver Unit | 1.5 inch driver x 2 + 2.6 inch passive radiator |
| Frequency Response | 100Hz-18kHz |
| Signal to Noise Ratio | >=55dB |
| Unit Weight | 560 g |
| Unit Dimension | 6.6 x 2.7 x 2.9 inches (16.76 x 6.86 x 7.37 cm) |
| Bluetooth Range | 10 meters / 33 ft |
| Warranty | One-year limited |
Battery Information
- Type: Li-ion 3.7V 2200mAh
- Input: 5V 1A
- Charging Time: 3 hours
- Playback Time: Up to 20 hours (at 50% volume)
Important Notes:
- Fully charge the speaker before initial use.
- If the speaker beeps every few seconds, please recharge it for 2-3 hours.
- The speaker has an auto-power-off feature (15 minutes of inactivity) to save battery. To disable this function, contact support.
Safety Warnings
- DO NOT drop, hit, or shake the speaker.
- DO NOT disassemble, repair, or modify the speaker yourself.
- DO NOT use cleaning products containing benzene, solvents, or alcohol.
- DO NOT expose the speaker to excessive heat or direct sunlight for extended periods.
- DO NOT store the speaker in humid or dusty environments.
- DO NOT place heavy objects on top of the speaker.
- DO NOT use the speaker near microwave ovens or wireless LAN products.
Support
For assistance, please contact the support team at support@dossav.com.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
