Snap-on HHGA5A Independent Hand Held 5 Gas Analyzer

Features and Benefits

• Fully Portable 5 Gas Analyzer: Go Anywhere, use anywhere. Operates on 110 VAC & 12V power with an internal rechargeable battery providing up to 1 hour of use. Ideal for road testing and mobile use.
• Measures exhaust emissions for: CO, CO2, HC, O2, NOx and AFR/Lambda. Provides an instant assessment of an engine vehicle exhaust and catalytic converter.
• MODIS™ & VERUS™ Link for enhanced real time viewing:
  • Add a 5 Gas Analyzer function to MODIS™ and VERUS™.
  • Setup required with included software on USB stick.
  • Gather all the evidence required for effective & accurate vehicle diagnostics on one screen in real time.
  • View the "Big Picture" including: Gas Analysis, Scope readings, Scanner results, Component tests, Digital graphing function, and View, graph, save & recall data.

More Features and Benefits

• Monitor & Reduce Vehicle Emissions – Improve Driveability & Fuel Efficiency.
• The Snap-on HHGA5A is truly Handheld - About the size and weight of a DMM offering True Portability.
• Links to MODIS™, VERUS™ and other suitable Bluetooth devices.
• There are 255 memory locations in the analyzer to track and print data for the same or many different vehicles.
• HHGA5A is compatible with Gasoline, CNG, Propane and DIESEL Fuel types.
• HHGA5A is very sensitive and pulls only 1/14th the exhaust volume of competing analyzers. This means no problems with water ingress and pumps last longer.
• Service is handled at Crystal Lake Northern Repair - Annual Cal and sensor replacement. Required industry standard.
• Affordable to own – HHGA5A is a proven, trouble-free performer and includes the best support in the industry - toll free unlimited Helpline.

Telephone Help Desk: 888-717-1333 (8 AM - 9 PM Eastern Time, Monday - Saturday)

Note: "Plug and Play" simple connection to show 5 gas analyzer readings in "real time" on the MODIS™. Use the software provided to link to VERUS™ via Bluetooth® – plus will also link to other suitable Bluetooth Devices.

Specifications

*Using dry gases at STP with the instrument not subjected to sudden changes of temperature, pressure, position or severe vibration - CO calibration applies to exhaust gas only with a CO concentration of 5% or more.

** Calculated

*** 5,000ppm is absolute maximum, avoid prolonged reading above 1,500ppm NOx as sensor life may be reduced. NOx Zero may need to be reset by switching the unit on and off in fresh air.

**** With the fuel set for CNG the HC reading is more sensitive to fluctuations than when the fuel is set for Gasoline/Petrol

NOTE: Unit is designed for pre-compliance emission testing. Unit tested using BAR97 gas, ...however... is not BAR97 approved.

Optional Accessories

Kit Contents

What potential vehicle problems can be detected?

• Problems in ignition system (Spark plugs, wires)
• Engine compression problems
• Temperature sensor malfunction
• EGR Valve problems
• Dirty air filter
• Obstructed intake valve ports
• Lambda Sensor failure
• Excessive Fuel Consumption
• Misfire
• Rusted exhaust (Internal or external rust)
• Non homologated exhaust (Wrong back pressure)
• Melted catalytic converter
• Worn out catalytic converter
• Obstructed exhaust or catalytic converter
• and much more ...