Assembly Instructions
This guide provides detailed instructions for assembling the FITUEYES TT88 Table Top TV Stand.
What's in the Box
Verify all parts and hardware are present before beginning assembly.
| Part Label | Description | Quantity |
|---|---|---|
| 1 | Base Plate | x2 |
| 2 | Leg | x2 |
| 3 | Base Plate | x2 |
| 4a | TV Mounting Bracket Component | x2 |
| 4b | TV Mounting Bracket Component | x2 |
| 4c | TV Mounting Bracket Component | x4 |
| 5 | Support Arm | x2 |
| 6 | Support Arm | x2 |
| 7 | Vertical Support | x2 |
| 8 | Top Bracket | x2 |
| 11 | Base Foot | x4 |
| 12 | Shelf | x4 |
| 13 | Back Panel | x2 |
| M8x40 | Screw | x8 |
| Ø20x8.5x1.5 | Washer | x2 |
| M8 | Screw | x2 |
| M8x12 | Screw | x2 |
| M8x55 | Screw | x2 |
| ST4.8x16 | Screw | x2 |
| M6x10 | Screw | x2 |
| M-A | Screw | x4 |
| M-B | Screw | x4 |
| M-C | Screw | x4 |
| M-D | Screw | x4 |
| M-E | Screw | x4 |
| M-F | Screw | x4 |
| M-G | Screw | x4 |
| M-H | Washer | x4 |
| M-I | Washer | x8 |
| M-J | Washer | x8 |
| 13-14mm | Screw | x4 |
| 4mm | Screw | x2 |
| 5mm | Screw | x4 |
Tools Required (Not Included)
Screwdriver (Phillips head recommended)
Assembly Steps
Step 1: Attach Legs to Base Plates
Attach the legs (2) to the base plates (1, 3) using M8x40 screws (x8) and Ø20x8.5x1.5 washers (x2). Ensure the base plates are oriented correctly.
Note: Do not tighten screws completely yet. [?]
Step 2: Attach Support Arms
Attach the support arms (5, 6) to the legs (2) using M8x50 screws (x2) and ST4.8x16 screws (x2). Ensure the arms are facing the correct direction.
Note: Do not tighten screws completely yet. [?]
Step 3: Attach Vertical Support to Base
Connect the vertical supports (7) to the base assembly. Use M8x12 screws (x2) and M8x55 screws (x2).
Step 4: Attach Top Bracket
Attach the top bracket (8) to the vertical supports (7) using M8 screws (x2).
Step 5: Attach TV Mounting Brackets
Attach the TV mounting bracket components (4a, 4b) to the vertical supports (7). Use M6x10 screws (x2).
Step 6: Attach Base Feet
Attach the base feet (11) to the bottom of the base plates. Use 5mm screws (x4).
Step 7: Attach Shelf
Attach the shelf (12) to the vertical supports (7). Use 13-14mm screws (x4).
Step 8: Attach Back Panel
Attach the back panels (13) to the vertical supports (7). Use 4mm screws (x2).
Step 9: Mount TV to Brackets
Attach the TV to the mounting bracket components (4a) using appropriate screws (M-A to M-G). Select screws based on your TV's back panel screw holes.
Note: For flat TV backs, use method A1 (without washers). For uneven backs, use method A2 with washers (M-H to M-J), stacking washers as needed.
Step 10: Part 4 Disassembly Diagram
This section shows a breakdown of the TV mounting bracket components, indicating parts 4a, 4b, and 4c.
Step 11: Height Adjustment and Screw Selection
Part 4 (TV mounting bracket system) indicates the adjustable range for the distance between the TV bottom and the ground. Choose the desired height, mark it on the ruler, and then attach part 4 to the back of the TV.
Select appropriate screws from M-A to M-G and install part 4a onto the four screw holes on the back of the TV. Use mounting method A1 (without washers) for flat TV backs, or method A2 (with washers M-H to M-J) for uneven backs, stacking washers as necessary.
Step 12: Attach Part 4b
Attach part 4b to the TV using the indicated screws and washers (M-I, M-J). Ensure correct orientation.
Step 13: Attach Part 4b
Repeat the process to attach the second part 4b to the TV.
Step 14: Attach Part 4c
Attach part 4c to the TV.
Step 15: Mount TV Assembly to Stand
Mount the TV assembly (with attached brackets) onto the main stand structure.
Step 16: Secure TV Assembly
Secure the mounted TV assembly to the stand.
Step 17: Final Tightening and Warning
Important: Tighten all screws securely. [✔️]
WARNING: When adjusting the TV's left and right angles, do not touch the moving parts shown in the figure to avoid pinching your hands. [⚠️]
