ZYXEL NR5101 5G Router Modification User Instructions
Warranty Notes
- This modification voids all warranty rights with the manufacturer and therefore shall not be returnable under warranty to the manufacturer.
- Do not open the unit once modified, doing so may damage the new antenna outputs. Any attempt to open the unit causing damage to the outputs are a chargeable repair.
Antenna Notes
- Please note this modification has converted the internal antennas to external antennas.
- The internal antennas are no longer functional as they are now converted for external antenna use.
5G SA/NSA
- SA (Stand-Alone) means the mast and router are capable of negotiating a link without needing a 4G connection first. The router must be SA capable, and the mast must have its own dedicated 5G infrastructure “SA” not dependent on 4G.
- NSA (None Stand-Alone) means the router and the mast must negotiate a 4G link before it can establish its 5G link. Once connected to 5G, it will still require the 4G link to maintain the 5G connection.
Software Configuration
- There have been no firmware/software adaptations to the router during the modification process.
- During testing of the modification, the router will have been restored to factory default settings. Any settings that were previously on the unit have been lost.
- If your unit has factory antenna outputs, please ensure within the router login page you have selected "use internal antenna". This ensures the use of the new modified antenna outputs.
Configuration Examples
5G NSA Configuration
This diagram illustrates the 5G NSA configuration for the modified ZYXEL NR5101 5G Router. It shows external antenna connections labeled as '5G 2x2 MIMO Antenna', 'High Band 2x2 MIMO Antenna', and 'Low Band 2x2 MIMO Antenna'. A note indicates that the internal antenna setting should be selected as 'INT'.
4G Configuration
This diagram illustrates the 4G configuration for the modified ZYXEL NR5101 5G Router. It shows external antenna connections labeled as 'High Band 2x2 MIMO Antenna' and 'Low Band 2x2 MIMO Antenna'. A note indicates that the internal antenna setting should be selected as 'INT'.
Contact Information
For any other enquiries, please contact us.
Email: enquiries@router-mods.co.uk
Web: www.router-mods.co.uk