VersArray 6 - Hang System
With 1 VR-218 Sub per side & 2 VR-218 Subs as Center Aux Fed
Total System Power: 25,820 Watts
System Overview
The VersArray 6 Hang System is a high-performance professional audio setup designed for significant sound reinforcement applications. This configuration delivers a total of 25,820 Watts, featuring a balanced distribution of full-range and subwoofer enclosures, managed by dedicated processors and amplifiers.
The system is configured with one VR-218 subwoofer per side for the main stereo output, complemented by two VR-218 subwoofers acting as a center auxiliary-fed cluster. This arrangement ensures robust low-frequency coverage and impact.
Left & Right FOH System Components
| QTY | Model | Description |
|---|---|---|
| 12 | VR-112 | Two-way Loudspeaker Enclosure |
| 4 | VR-218 | Low Frequency Loudspeaker Enclosure |
| 2 | CS-2000 | Power Amplifier |
| 6 | CS-4000 | Power Amplifier |
| 2 | VSX-26 | Digital Signal Processor |
| 2 | Fly Bar | Versarray 112 Fly Bar |
| 2 | Vermette Lift | Crank Up Loudspeaker Tower |
Systemware and Accessories
| QTY | Item | Description / Part Number |
|---|---|---|
| 12 | Pak Locking Pins | VR-112 Pins (4 Pak) #00594020 |
| 12 | 3 Ft Low Z | Balanced Cable #00380220 |
| 5 | D3F | Female XLR Panel Mount #00382340 |
| 2 | D3M | Male XLR Panel Mount #00382370 |
| 4 | NC3MX-BAG | Male XLR #00383560 |
| 8 | 2 Ft 4 Cond | 16-Gauge Spkn/Spkn Cable #00597020 |
| 2 | 10 Ft 4 Cond | 12-Gauge Spkn/Spkn Cable #00575030 |
| 4 | 25 Ft 4 Cond | 12-Gauge Spkn/Spkn Cable #00575040 |
| 2 | 50 Ft 4 Cond | 12-Gauge Spkn/Spkn Cable #00575050 |
| 8 | NL4MP | 4 Pole Speakon Panel Mount #00384870 |
| 1 | Distro | 6 x 20 Amp Power Distro #00511590 |
Amplifier Rack Configurations
The system utilizes three primary amplifier racks to house the processors and power amplifiers.
Rack 1 (Left FOH): VSX-26, CS-2000, CS-4000, CS-4000
Rack 2 (Center Aux Fed): Distro, CS-4000, CS-4000
Rack 3 (Right FOH): VSX-26, CS-2000, CS-4000, CS-4000
Note: CS-4000 amplifiers for all Subwoofers are configured in Bridge Mode.
The system includes 6 x 20 Amp Circuits for power distribution.
Audio Input/Output Panel Configurations
Note: Panels are renderings but are not to scale.
RP-1: Left FOH Panel
Inputs: Left Input [audio connector], Sub Input [audio connector]
Outputs: Sub Output [audio connector]
Connected Components: Low VR-218 [connection point], Mid/High 1 (Top 3 VR-112) [connection point], Mid/High 2 (Bot 3 VR-112) [connection point]
RP-2: Right FOH Panel
Inputs: Right Input [audio connector], Sub Input [audio connector]
Outputs: Sub Output [audio connector]
Connected Components: Low VR-218 [connection point], Mid/High 1 (Top 3 VR-112) [connection point], Mid/High 2 (Bot 3 VR-112) [connection point]
RP-3: Center Aux Fed Subs Panel
Inputs: SUB Input [audio connector]
Connected Components: VR-218 SUB [connection point], VR-218 SUB [connection point]
