Peavey PV 2.6 C Professional Stereo Power Amplifier
This document serves as the operating guide for the Peavey PV 2.6 C Professional Stereo Power Amplifier. It provides detailed information on the product's features, specifications, operation, safety, and warranty.
Safety Warnings and Precautions
[Warning Symbol] DANGEROUS VOLTAGE: This product may contain uninsulated "dangerous voltage" within its enclosure, posing a risk of electric shock.
[Information Symbol] IMPORTANT INSTRUCTIONS: This literature contains important operating and maintenance instructions for the product.
CAUTION: Risk of electrical shock – DO NOT OPEN! To reduce the risk of electric shock, do not remove the cover. There are no user-serviceable parts inside. Refer servicing to qualified personnel.
WARNING: To prevent electrical shock or fire hazard, do not expose this appliance to rain or moisture. Read the operating guide for further warnings before use.
This manual also contains safety information in Spanish, French, and German.
Front Panel Features
The front panel of the Peavey PV 2.6 C features several controls and indicators:
- (1) DDT™ ACTIVE LED INDICATOR: Illuminates when DDT™ compression is active, preventing clipping distortion. It functions as a clip indicator when the rear panel DDT™ ENABLE/DEFEAT switch is in the DEFEAT position. Occasional flashing is normal; continuous illumination indicates a need for more headroom or a more powerful amplifier.
- (2) POWER LED INDICATOR: Illuminates when AC power is supplied to the amplifier.
- (3) CIRCUIT BREAKER: A resettable breaker that limits current to the power transformer, protecting it from overheating and faults. It may trip due to short circuits, continuous overload, or clipping, especially into a 4-ohm load. To reset, turn the power switch off, then push the breaker button inward. Allow time to cool if it has tripped. If it trips repeatedly, contact a qualified service center.
- (4) POWER SWITCH: Push to the "I" position to turn the amplifier on. The unit features automatic resetting thermal protection; it will shut down if operating temperatures become excessively high and will re-enable upon cooling. Repeated thermal cycling suggests a load problem or inadequate ventilation.
Back Panel Features
The back panel provides connections and controls:
- (5) REMOVABLE LINE CORD (120 V products only): A three-wire grounded power cord is provided for safety. Do not remove the ground pin. Use grounding adaptors if necessary. Proper grounding reduces noise and shock hazard.
- (6) SPEAKER OUTPUTS: Jacks for connecting external speakers. The minimum total impedance is 4 ohms.
- (7) DDT™ COMPRESSION: This patented Peavey circuit automatically engages to prevent clipping distortion. It is defeated when the pushbutton is pressed "in". It is recommended to keep DDT™ enabled at all times to protect speakers.
- (8) INPUT SENSITIVITY: Adjusts input gain. Maximum gain (minimum sensitivity) is at the full clockwise setting. Lower settings reduce noise but may reduce headroom. Calibration indicates the voltage/dBV required for full output.
- (9) CHANNEL INPUTS: Standard 1/4" phone jacks supporting two modes:
- a. STEREO Operation: Each jack serves as the input for its respective channel.
- b. MONO Operation: Use the 'A' input jack, inserting the plug only to the first click/detent. This applies the signal equally to both channels.
Specifications
| Parameter | Value |
|---|---|
| Output Power (1 kHz, 1% THD) | 4 ohms: 130 W RMS 8 ohms: 100 W RMS 2 ohms: Not recommended |
| Rated Output Power (20 Hz-20 kHz, 0.1% THD) | 4 ohms: 100 W RMS 8 ohms: 90 W RMS |
| Slew Rate (Stereo, each channel) | 20 volts/µSec |
| Total Harmonic Distortion (20 Hz-20 kHz @ rated power, 8 ohms) | Less than 0.1% |
| Input Sensitivity & Impedance (@ rated output power) | 4 ohms: 1.0 V RMS, 0 dBV; 20 k ohms (26 dB) |
| Frequency Response | +0, -1 dB, 20 Hz to 30 kHz, 1 W RMS, 8 ohms |
| Damping Factor (8 ohms, 1 kHz) | Greater than 200 |
| Hum & Noise (below rated output power) | 8 ohms: 100 dB, unweighted |
| Power Consumption | Domestic: 600 watts, 60 Hz, 120 V AC Export: 600 watts, 50/60 Hz, 230 V AC |
| Dimensions (H x W x D) | 3.5" x 19" x 9.6" |
| Weight | 15.6 lbs. |
Features and specifications are subject to change without notice.
Wiring Diagrams Description
The manual includes diagrams illustrating connection methods:
Stereo Operation
For stereo operation, both input plugs (A and B) are fully inserted into their respective jacks. Each input feeds an independent channel amplifier. The speaker outputs are wired in parallel, supporting a minimum load of 4 ohms per channel, delivering 130W RMS.
Mono Operation
For dual-channel mono operation, a single input plug is inserted into the 'A' channel input jack only up to the first click or detent. This configuration sends the same signal to both amplifier channels. The speaker outputs are wired in parallel, supporting a minimum load of 4 ohms per channel, delivering 130W RMS.
Important Safety Instructions
Always follow basic safety precautions when using electric products:
- Read all safety and operating instructions before use and retain them for future reference.
- Obey all cautions on the unit and in the operating instructions.
- Do not use near water (bathtub, sink, pool, wet basement).
- Locate the product to ensure proper ventilation; do not place flat against a wall or in a built-in enclosure that impedes airflow.
- Keep away from heat sources like stoves or radiators.
- Connect only to the specified power supply type.
- Never break off the ground pin on the power supply cord.
- Handle power supply cords carefully; avoid walking on them or placing equipment on them. Periodically check cords for damage.
- Unplug the unit when unused for extended periods.
- Provide rear support if mounting in an equipment rack.
- Clean metal parts with a damp rag. Vinyl covering can be cleaned with a damp rag or ammonia-based cleaner. Disconnect power before cleaning.
- Prevent objects from falling into or liquids from spilling into the unit through ventilation holes or openings.
- Have the unit checked by a qualified service technician if the power cord/plug is damaged, something has fallen/spilled into the unit, the unit does not operate correctly, or the unit has been dropped/damaged.
- Do not attempt to service the equipment yourself; all service work should be done by a qualified technician.
- Use only with a recommended cart or stand.
- Hearing Protection: Exposure to extremely high noise levels can cause permanent hearing loss. Follow OSHA permissible noise level exposures. Wear ear plugs or protectors when operating this system at high sound pressure levels.
Limited Warranty
This limited warranty is valid only when purchased and registered in the United States or Canada. Exported products are subject to warranty and services specified by the authorized distributor for each country.
Peavey One-Year Limited Warranty/Remedy: Peavey warrants the product (excluding covers, footswitches, patchcords, tubes, and meters) to be free from defects in material and workmanship for one year from the date of purchase. This warranty is extended only to the original retail purchaser.
Peavey 90-Day Limited Warranty on Tubes and Meters: Tubes and meters are warranted for ninety (90) days from the date of purchase.
Conditions, Exclusions, and Limitations: The warranty is void if the product is for resale, not purchased from an authorized dealer, damaged by accident/misuse/neglect, or has an altered serial number.
Remedy: Peavey will repair or replace defective components or products at its option. Shipping costs are the purchaser's responsibility.
Warranty Registration: The warranty registration card must be completed and mailed within 14 days of purchase. Proof of purchase is required for service.
Limitations of Liability: Peavey's liability is limited to actual damages up to the purchase price or $500, whichever is greater, and does not cover lost profits, incidental, or consequential damages. Implied warranties are limited to the duration of the express warranties.
Other Peavey Products
For further information on other Peavey products, ask your Authorized Peavey Dealer for the appropriate catalog or publication. Peavey offers:
- Bass Guitars
- Guitars
- Bass Amplification
- Guitar Amplification
- Sound Reinforcement Enclosures
- Microphones
- Keyboards
- DJ Equipment
- Lighting
- Mixers (Powered/Non-Powered)
- Accessories/Cables
- Effects Processors
- Axcess™ Wear
- The Peavey Beat™
- Monitor@ Magazine
- Key Issues™
- Low Down™
- PM™ Magazine
