BÄCKNATE Table Lamp Assembly Instructions
Product by IKEA
Important Safety Information ⚠️
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. If you are uncertain, please contact IKEA. This warning is provided in multiple languages within the original document.
Assembly Steps
Step 1: Thread the electrical cord through the fabric of the lampshade and secure it with the provided clip.
Visual: Hands threading cord through fabric, applying clip.
Step 2: Fold and shape the lampshade fabric into its conical form.
Visual: Hands shaping the fabric.
Step 3: Insert the lamp holder into the cylindrical base, ensuring the cord exits through the bottom opening.
Visual: Lamp holder inserted into cylinder, cord exiting below.
Step 4: Attach the mounting plate to the bottom of the cylinder using one screw.
Visual: Plate attached to cylinder base with screw.
Step 5: Begin fitting the shaped lampshade onto the base structure.
Visual: Hands aligning lampshade with base.
Step 6: Secure the lampshade to the base using two screws.
Visual: Screws fastening lampshade to base.
Step 7: Attach the decorative ring to the top of the lampshade.
Visual: Ring being fitted onto the lampshade top.
Step 8: Secure the lampshade further using two more screws.
Visual: More screws securing lampshade.
Step 9: Unscrew and remove the lamp holder from the cylindrical base.
Visual: Lamp holder being unscrewed.
Step 10: Screw the light bulb into the lamp holder. Then, insert the lamp holder assembly into the top of the lampshade, aligning it with the base.
Visual: Bulb screwed into holder, assembly inserted into lampshade.
Step 11: Place the lampshade onto the base. Adjust the cord for a proper fit.
Visual: Lampshade placed on base, cord adjusted.
Step 12: Adjust the light bulb within the lamp holder for proper seating.
Visual: Hand adjusting bulb, arrows showing movement.
Resources
For more information, product details, or assembly videos, please visit: