RINGBLOMMA Roman Blind
This document provides instructions for assembling and installing the IKEA RINGBLOMMA Roman blind. Please read all instructions carefully before beginning assembly.
Important Information
As wall materials vary, screws for fixing to the wall are not included. For advice on suitable screw systems, please contact your local specialized dealer.
Assembly Steps
- Prepare the Wall: Ensure the wall is suitable for mounting. Use a spirit level [?] to check that the mounting points are level.
- Attach Brackets: Securely attach the mounting brackets to the wall using appropriate screws and wall plugs for your wall type. The diagram shows two brackets being attached to the wall.
- Prepare the Blind: Lay the Roman blind flat. Insert the rods into the designated channels on the fabric.
- Attach Blind to Brackets: Hang the blind onto the mounted brackets. The diagram shows the blind being lifted and attached to the brackets.
- Install the Control Mechanism: Attach the control mechanism to the side of the blind as shown in the diagrams. This typically involves securing a cord or chain.
- Test the Blind: Operate the blind to ensure it functions correctly.
Note: The diagrams illustrate the process. Specific details may vary based on the exact model and your wall type. Always use the correct fixings for your wall.
The product requires 2 or 3 screws for mounting, as indicated in the diagrams.
Care Instructions:
The fabric of the RINGBLOMMA Roman blind can be washed. Refer to the care label on the fabric for specific washing instructions. The diagram shows the fabric being removed from the mechanism, possibly for washing.
Product Details
The RINGBLOMMA Roman blind is available in various colors and sizes, including white, beige, and white/green/stripe patterns.
Part Numbers Mentioned: 157683, 10121703
