Metra 95-7018 Installation Instructions

Kit Features

• ISO DDIN radio provision
• Painted to match factory dash: 95-7018B (Matte black), 95-7018CHG (Charcoal gloss)

Kit Components

• A) Radio trim panel
• B) Radio brackets
• C) #8 x 3/8" Phillips screws (4)

Diagram showing the car's dashboard with the radio area. The kit components are illustrated: A) Radio trim panel, B) Radio brackets, C) Four #8 x 3/8" Phillips screws.

Tools Required

• Panel removal tool
• Phillips screwdriver

Wiring & Antenna Connections (sold separately)

• Wiring Harness: Visit metraonline.com for audio/video and steering wheel control interface options.
• Antenna Adapter: Not required

Important Safety Note

⚠️ Attention: With the key out of the ignition, disconnect the negative battery terminal before installing this product. Ensure that all installation connections are secure before cycling the ignition to test this product.

Dash Disassembly

• 1. Using the panel removal tool, gently unsnap the radio trim panel. (Refer to Diagram A)
• 2. Remove (4) screws and remove the factory radio. (Refer to Diagram B)

Diagram A: Shows the radio trim panel being gently unsnapped from the dashboard using a panel removal tool.

Diagram B: Shows the removal of four screws securing the factory radio, followed by the removal of the factory radio.

Kit Assembly

• 1. Attach the radio brackets to the radio trim panel using the (4) #8 x 3/8" Phillips screws provided. (Refer to Diagram A)
• 2. Slide the radio into the completed assembly, and then secure it to the assembly using screws supplied with the radio. (Refer to Diagram B)
• 3. Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or AXXESS. Test the radio for proper operation.
• 4. Reassemble the dash in reverse order of disassembly.

Diagram A: Illustrates attaching the radio brackets to the radio trim panel using four #8 x 3/8" Phillips screws.

Diagram B: Shows sliding the radio into the assembled trim panel and securing it with screws supplied with the radio.

Support Information

Having difficulties? We're here to help.

• Contact our Tech Support line at: ? 386-257-1187
• Or via email at: ? techsupport@metra-autosound.com
• Tech Support Hours (Eastern Standard Time):
  • Monday - Friday: 9:00 AM – 7:00 PM
  • Saturday: 10:00 AM – 5:00 PM
  • Sunday: 10:00 AM – 4:00 PM
• Metra recommends MECP certified technicians.