Metra Stereo Dash Kits Installation Instructions
stereo dash kits, stereo in-dash kits, stereo installation kit, in dash stereo installation, audio cables, audio wires, stereo installation components
CARiD
99-5815-installation-instructions INSTALLATION INSTRUCTIONS FOR PART 99-5815
APPLICATIONS See application list inside
Ford/Lincoln/Mercury 2004-2012 99-5815
KIT FEATURES · DIN radio provision with pocket · ISO mount radio provision with pocket · Double DIN radio provision · Stacked ISO mount unit provision
KIT COMPONENTS
· A) Radio housing (DIN and ISO DIN) · B) ISO brackets · C) ISO trim plate · D) Side brackets · E) Radio housing (Double DIN and stacked ISO DIN) · F) Double DIN brackets · G) (4) Screws · H) (8) Spacers
A
B
C
D
E
F
ANTENNA CONNECTIONS (sold separately) Antenna Adapter: · 40-CR10 - Chrysler antenna adapter 2002-up
TOOLS REQUIRED · Cutting tool · Panel removal tool · Phillips screwdriver · Socket set
H
G
CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the aftermarket radio.
99-5815
Applications
Ford 500 ................................... 2005-2007 E-Series................................. 2009-up Edge ................................. 2007-2010 Expedition ......................... 2007-2012 Explorer ............................ 2006-2010 Explorer Sport Trac ........... 2006-2010 F-150 ............................... 2004-2008 F-Series Super Duty .............. 2005-up Focus ............................... 2005-2007 Freestar ............................ 2004-2007 Freestyle ........................... 2005-2007 Fusion .............................. 2006-2009 Mustang ........................... 2005-2009 Taurus .............................. 2008-2009 Taurus X ........................... 2008-2009
Lincoln Navigator with OE NAV ......... 2007-2012 Mark LT ............................ 2005-2008 MKX with OE NAV................. 2007-2009
Mercury Milan ................................ 2006-2009 Montego ........................... 2005-2007 Monterey .......................... 2004-2007 Mountaineer ..................... 2006-2010 Sable ................................ 2008-2009
Ford F-150 2004-2008/ Edge 2007-2009/
Expedition 2007-2012, Lincoln Mark LT 2005-2008
1. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A)
2. Remove (4) 9/32" screws to remove the factory radio. (Figure B)
(Figure A)
(Figure B)
Dash Disassembly 99-5815
Ford Mustang 2005-2009
1. Remove the small rectangular shifter lever trim panel if equipped. (Figure A)
2. Remove (2) Phillips screws from under the center armrest at the back of the shifter trim panel (including cup holders). (Figure B)
3. Unclip and remove panel. (Figure B)
4. Unclip and remove the (2) center stack trim panels from the left and right side of the radio and climate controls. (Figure C)
5. Remove (6) 9/32" screws from center trim panel surrounding the radio and climate controls then unclip and remove panel. (Figure D)
6. Remove (4) 9/32" screws from the radio to remove. (Figure E)
(Figure C)
(Figure D)
(Figure D)
Ford 500 2005-2007/ Taurus 2008-2009,
Mercury Montego 20052007/Sable 2008-2009
(Figure A)
(Figure B)
1. Unclip and remove the small rectangular trim around shift lever. (Figure A)
2. Unclip and remove the entire panel (including cup holders) surrounding the shift lever. (Figure B)
3. Remove (2) 9/32" screws at the bottom of the center radio/climate control panel. (Figure C)
4. Unclip and remove the center panel. (Figure D)
Ford 500 2005-2007/ Taurus 2008-2009,
Mercury Montego 20052007/Sable 2008-2009
5. Remove (4) 9/32" screws from the radio to remove. (Figure E)
Dash Disassembly 99-5815
Ford Fusion 2006-2009 Mercury Milan 2006-2009
1. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A)
2. Remove (4) 9/32" screws to remove the factory radio. (Figure B)
Ford Freestyle 20052007/Taurus X 2008-2009
Continue to kit assembly
(Figure B)
(Figure A) (Figure C)
(Figure D)
(Figure E)
(Figure A)
(Figure B)
Ford Freestar/Mercury Monterey 2004-2007
(Figure A)
(Figure B)
Ford Freestyle 20052007/Taurus X 2008-2009
1. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A)
2. Remove (4) 9/32" screws to remove the factory radio. (Figure B)
1. Unclip and remove entire panel surrounding the radio and A/C controls. (Figure A)
2. Remove (4) 9/32" screws from radio to remove. (Figure B)
(Figure A)
(Figure B)
Ford Focus 2005-2007
1. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A)
2. Remove (4) 9/32" screws to remove the factory radio. (Figure B)
Dash Disassembly 99-5815
Ford Explorer/Explorer Sport Trac/Mercury
Mountaineer 2006-2010
2. Remove dash panel surrounding radio to access the factory radio screws. (Figure B)
3. Remove (4) 9/32" screws to remove the factory radio. (Figure B)
Ford E-Series 2009-up/ F-Series Super Duty 2005-up
1. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A)
2. Remove (4) 9/32" screws to remove the factory radio. (Figure B)
(Figure A)
(Figure B)
Ford Explorer/Explorer Sport Trac/Mercury
Mountaineer 2006-2010
1. Open center console and remove (2) Phillips screws then unclip and remove entire panel surrounding shifter. (Figure A)
(Figure A) (Figure B)
(Figure C)
(Figure A) (Figure B)
Dash Disassembly 99-5815
Kit Assembly 99-5815
Lincoln Navigator 2007-2012
1. Unclip and remove the panel surrounding the shifter. (Figure A)
2. Remove (2) 9/32" screws from the bottom of the radio/climate control trim panel. (Figure B)
3. Unclip and remove the entire panel surrounding the radio and including the climate controls. (Figure B)
4. Remove (4) 9/32" screws securing the radio. Unplug and remove the radio.
Lincoln MKX 2007-2009
1. Open center console lid and unclip and remove the center console trim panel surrounding the shifter. (Figure A)
2. Remove (2) Phillips screws from the storage bin then unclip and remove the bin. (Figure B)
3. Unclip and remove the upper and lower center trim panel as one assembly. (Figure C)
4. Remove (4) 9/32" screws securing the radio. Unplug and remove the radio.
DIN radio provision
with pocket
1. (a) For the Ford Edge 2007-2010, Expedition 2007-2012, Explorer 2006-2010, Fusion 20062009, and the Mustang 2005-2009 attach the included spacers to the back of the radio housing mounting tabs. (Figure 1A)
Note: Use the screws supplied with this kit to mount the radio housing in the vehicles that require the spacers.
(b) For the Ford Freestar 2004-2007, Monterey 2004-2007, Focus 2005-2007, and the F-Series Super Duty 2005-2012, slide the included brackets onto the sides of the radio housings pocket from the back of the housing forward. (Figure 1B)
If your vehicle is not listed above move to Step 2.
(Figure A)
(Figure C)
(Figure A)
(Figure B)
(Figure B)
(Figure 1A)
(Figure 1B)
Kit Assembly 99-5815
DIN radio provision with pocket
2. Slide the DIN cage into the radio housing and secure by bending the metal locking tabs outward. (Figure A)
3. Slide the aftermarket radio into the cage until it snaps in place. (Figure B)
4. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
5. Reassemble dash in reverse order of disassembly.
(Figure A)
(Figure B)
ISO mount radio provision with pocket
1. (a) For the Ford Edge 2007-2010, Expedition 2007-2012, Fusion 2006-2009, and the Mustang 2005-2009 attach the included spacers to the back of the radio housing mounting tabs. (Figure 1A)
Note: Use the screws supplied with this kit to mount the radio housing in the vehicles that require the spacers.
(b) For the Ford Freestar 20042007, Monterey 2004-2007, Focus 2005-2007, and the F Series Super Duty 2005-2012, slide the included brackets onto the sides of the radio housings pocket from the back of the housing forward. (Figure 1B)
If your vehicle is not listed above move to Step 2.
(Figure 1A) (Figure 1B)
Kit Assembly 99-5815
ISO mount radio provision with pocket
2. Mount the ISO brackets to the head unit with the screws supplied with the unit. (Figure A)
3. Slide the head unit into the radio opening until the side clips engage. (Figure B)
4. Snap the trim plate into the radio housing. (Figure B)
5. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
6. Reassemble dash in reverse order of disassembly.
(Figure A)
(Figure B)
Double DIN radio provision
1. For the Ford Edge 2007-2010, Expedition 2007-2012, Explorer/ Fusion/Mercury Milan 20062009, F-150 2004-2008, Ford 500/Freestyle/Mercury Montego 2005-2007, Mustang 2005-2009, and the Lincoln Mark LT 20052008, cut and remove the rear mounting tabs from the double DIN brackets
If your vehicle is not listed above move to Step 2.
(Figure A)
2. For the Ford Edge 2007-2010, Expedition 2007-2012, Explorer 2006-2010, Fusion 2006-2009, and the Mustang 2005-2009 attach the included spacers to the back of the radio housing mounting tabs.
If your vehicle is not listed above move to Step 3. (Figure A)
Note: Use the screws supplied with this kit to mount the radio housing in the vehicles that require the spacers.
Kit Assembly 99-5815
Double DIN radio provision
3. Attach the double DIN brackets to the radio housing.
Note: The notch in the housing should be on top. (Figure 3A, 3B)
4. Slide the double DIN radio into the radio housing/bracket assembly and secure the radio to the assembly using the screws supplied with the radio. (Figure C)
5. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
6. Reassemble dash in reverse order of disassembly.
(Figure 3A) (Figure 3B)
(Figure C)
Stacked ISO mount unit provision
1. For the Ford Edge 2007-2010, Expedition 2007-2012, Explorer/ Fusion/Mercury Milan 20062009, F-150 2004-2008, Ford 500/Freestyle/Mercury Montego 2005-2007, Mustang 2005-2009, and the Lincoln Mark LT 20052008, cut and remove the rear mounting tabs from the Double DIN brackets.
If your vehicle is not listed above move to Step 2.
(Figure A)
2. For the Ford Edge 2007-2010, Expedition 2007-2012, Explorer 2006-2010, Fusion 2006-2009, and the Mustang 2005-2009 attach the included spacers to the back of the radio housing mounting tabs. (Figure A)
If your vehicle is not listed above move to Step 3.
Note: Use the screws supplied with this kit to mount the radio housing in the vehicles that require the spacers.
Kit Assembly 99-5815
Stacked ISO mount unit provision
3. Attach the double DIN brackets to the radio housing.
Note: The notch in the housing should be on top. (Figure 3A, 3B)
4. Slide the ISO mount units into the radio housing/bracket assembly and secure the units to the assembly using the screws supplied with the units. (Figure C)
5. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
6. Reassemble dash in reverse order of disassembly.
(Figure 3A) (Figure 3B)
(Figure C)
Adobe PDF Library 9.9