PlugBug Travel 50W

What's in the Box

The package includes:

• The PlugBug Travel 50W unit (A).
• International Plug Adapters (B):
• 1. Type A - US
• 2. Type C - EU
• 3. Type G - UK
• 4. Type I - AU
• 5. Type A - CN
• 6. Type C - KR

Diagram Description: A depiction of the PlugBug Travel 50W unit and six interchangeable plug adapters. The adapters are labeled 1 through 6 and correspond to Type A (US), Type C (EU), Type G (UK), Type I (AU), Type A (CN), and Type C (KR) plugs.

Battery Replacement

Button battery replacement steps:

First, press the battery compartment clip to remove the rear cover. Then, use a screwdriver to unscrew two metal screws on the middle partition. Open the middle partition to replace the battery.

Diagram Description: An illustration showing the battery compartment of the PlugBug. It indicates a clip to open the cover and screws within the compartment.

The battery type is CR2032 with a nominal voltage of 3.0V. Non-rechargeable batteries are not to be recharged.

Ensure batteries are installed correctly according to polarity (+ and -).

Always completely secure the battery compartment. If it does not close securely, stop using the product, remove the batteries, and keep them away from children.

Diagram Description: An exploded view showing the battery compartment cover, screws, the CR2032 battery, and the PlugBug unit, illustrating the battery replacement process.

Attaching and Removing Plug Adapter

Diagram Description: Two illustrations show the process of attaching and detaching a plug adapter to the main PlugBug unit. Arrows indicate the direction of connection and disconnection.

Turn on PlugBug

Press and hold the button for 3 seconds. The device will beep and turn on. A double press of the button will sound a chime.

Note: To turn off, double-click the device first, then quickly press the button 5 times within 2 seconds for a long beep.

Diagram Description: An illustration of the PlugBug unit, highlighting the button and indicating its function for turning the device on and off.

Using Apple Find My

Please reference the PlugBug Find My setup guide.

Diagram Description: Illustrations of the PlugBug unit and a smartphone. The smartphone screen displays "Searching Items...", suggesting its use with the Apple Find My feature.

Reset PlugBug

After successfully removing the PlugBug from the Find My app, quickly press the button twice; a chime will sound. Then, press and hold the button for about 5 seconds after the second confirmation chime. Press and hold again for another 3 seconds until a prompt sound is heard to reset the device.

The PlugBug is now reset and ready to be paired to a new Apple ID.

Diagram Description: An illustration of the PlugBug unit, similar to the 'Turn on' diagram, indicating the button for reset operations.

Dynamic Power Allocation

Product Specifications

• Product Name: PlugBug Travel 50W
• Model: PB50-US
• Input: AC 100-240V 50/60Hz, 1.5A Max
• Output/Sortir: PD3.0 Output(Sortir): 5V 3A, 9V 3A, 12V 3A, 15V 3A, 20V 2.5A (50W Max)
• C1+C2: 30W+20W (50W Max)

Safety and Compliance

Designed by Twelve South. Made in Vietnam.

WARNING: INGESTION HAZARD: This product contains a button cell or coin battery. DEATH or serious injury can occur if ingested. A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours. KEEP new and used batteries OUT OF REACH of CHILDREN. Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

Recycling Information: Visit how2recycle.info. Information on proper disposal and recycling of the device and its accessories is provided, with links to local collection points.

Certifications: The device is certified by ETL, UKCA, UL, CE, and R-NZ, meeting various safety and performance standards.

Safety Standards Compliance:

• For information technology equipment and office equipment use only.
• Do not use if the outer enclosure or plug is damaged.
• Do not exceed manufacturer's specifications.
• Do not attempt to disassemble or modify the charger; doing so may result in injury or damage.
• Ensure the charger is connected to a compatible power source and the voltage matches the device's requirements.
• Always unplug the power supply when not in use.
• Only use indoors in a dry environment. Do not expose the power supply to dripping or splashing water.
• Do not place objects filled with liquids, such as vases, etc., on or near the power supply.
• Do not cover the charger during operation or use it near heat sources such as radiators or stoves.
• Store the charger in a location inaccessible to children to prevent accidental ingestion or tampering.
• This product is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the power supply by a person responsible for their safety.
• Maximum ambient temperature: 25°C / 77° F.
• The main plug is used as the disconnect device. The disconnect device shall be readily operable.
• Before charging, ensure there are no foreign objects, such as metal objects or liquids, obstructing the charger's ports. Inserting foreign objects may damage the charger or connected devices.
• Do not expose the charger to flammable or harsh chemicals or vapors.
• Do not use the charger when either you, the vehicle, or the charger is exposed to severe rain, snow, electrical storm, or other inclement weather.
• When transporting the charger, handle with care to prevent damage to any of its components. Do not subject the charger to strong force or impact. Do not twist, tangle, drag, or step on the charger or any of its components.
• Protect the charger from moisture, water, and foreign objects at all times. If any exist or appear to have corroded or damaged the charger, do not use the charger.
• Do not use this device with an extension cord or an adapter.
• Ensure that the charger's charging cable does not obstruct pedestrians or other objects.
• Connect only to a properly grounded outlet.
• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
• The device shall be used in such a manner that the potential for human contact normal operation is minimized.
• This transmitter must be installed to provide a separation distance of at least 20 cm from all persons.
• Conforms to UL 62368-1 and Certified to CSA C22.2 No. 62368-1:19.

Battery Disposal:

Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate. Call a local poison control center for treatment information.

EU/UKCA Declaration of Conformity:

A copy of the EU Declaration of Conformity is available at https://twelvesouth.co.uk/. Twelve South's EU representative is CMS Distribution. A copy of the UKCA Declaration of Conformity is available at https://twelvesouth.co.uk/. Twelve South's EU representative is CMS Distribution.

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and should be installed and operated with a minimum distance of 20cm between the radiator and your body.

ISED Statement (Canada):

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.

RF Exposure Statement:

The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Contact Information

Have questions?

Visit twelvesouth.com or contact support@twelvesouth.com

© 2024 Twelve South, LLC. All rights reserved. 1503 King St. Charleston, SC 29405-USA