Anker 323 Charger (33W)

Important Safety Information

Read all instructions before using the product.

• The product is designed for use with IT equipment only.
• Naked flame sources, such as candles, must not be placed on the product.
• Disconnection from line voltage is made by the AC plug.
• In case of broken plugs, the product must be disposed of.
• If you want to clean the product, only use a dry cloth or brush.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• The power supply is not intended to be repaired by service personnel in case of failure or component defect; the product can be disposed of.
• Do not expose the product to liquid or moisture.
• Keep the product away from heat, direct sunlight, and fire.
• Keep away from high voltage equipment.
• Keep away from children.
• Do not disassemble, open, drop, or otherwise damage the product.
• For indoor use only.
• Do not use in tropical climates.
• Ensure the power cord is routed to avoid tripping or being stepped on.
• Never replace the fuse or plug with non-original replacements.
• Improper connection may cause electric shock.
• When using an extension cord, ensure the grounding conductor in the cord is intact.
• Connect only to a grounded outlet.
• Ensure the power plug is connected to a grounded socket.
• Ensure the disconnect device (power plug) is accessible for operation.
• Do not expose batteries to high heat such as sunlight or fire.
• If replacing batteries, use only similar or equivalent batteries. Incorrect replacement may cause explosion.
• Do not dispose of batteries in household waste; use designated recycling facilities.

Product Overview & Usage

The Anker 323 Charger is a 33W dual-port power adapter featuring one USB-C port and one USB-A port.

Port Identification:

• Port 1: USB-C
• Port 2: USB-A

This charger is designed to power and charge compatible electronic devices, primarily IT equipment.

Specifications

Regulatory Compliance

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

Importer (for FCC matters): Fantasia Trading LLC, 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764, USA. Telephone: +1 (800) 988 79733.

IC Statement

This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).

Declaration of Conformity

Anker Innovations Limited declares that this product is in compliance with EU Directives 2014/35/EU, 2014/30/EU, 2011/65/EU, 2009/125/EC, and 2019/1782/EU. The full text of the EU declaration of conformity is available at: https://www.anker.com.

Anker Innovations Limited declares that this product is in compliance with UK regulations: Electrical Equipment (Safety) Regulations 2016, Electromagnetic Compatibility Regulations 2016, The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012, and The Ecodesign for Energy-Related Products Regulations 2010. The full text of the GB declaration of conformity is available at: https://www.anker.com.

Customer Support and Warranty

For FAQs and more information, please visit: anker.com/support

Contact Information:

• Email: support@anker.com
• Middle East & Africa Support: support.mea@anker.com

Phone Support:

• US/CA: +1 (800)988 7973
• UK: +44 (0) 1604 936200
• DE: +49 (0) 69 9579 7960
• Middle East & Africa: +971 42428633
• UAE: +971 8000320817
• KSA: +966 8008500030
• Kuwait: +965 22069086
• Egypt: +20 8000000826
• AU: +61 3 8331 4800
• TR: +90 0850 460 14 14
• RU: +8 (800) 511-86-23
• India: +91 18003138831
• China: +86 400 0550 036
• Japan: 03 4455 7823
• Korea: +82 02-1670-7098

Warranty:

• 18-month limited warranty.
• Lifetime technical support.

*Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.

Recycling Information

This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.