Anker PowerPort Atom III 60W

Using Your Product

The product features two USB-C ports, designed for charging devices.

For the fastest and safest charge, use an Anker® cable, your device's original cable, or another certified cable (such as MFi).

Attention: Safety Precautions

• The product is designed for use with IT equipment only.
• The maximum ambient temperature during use must not exceed 25°C (77°F).
• Naked flame sources, such as candles, must not be placed on the product.
• Disconnection from line voltage is made by the AC plug.
• In case of broken cords or plugs, the product must be disposed of.
• If you want to clean the product, only use a dry cloth or brush.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• The power supply is not intended to be repaired by service personnel in case of failure or component defect; the product can be disposed of.

Specifications

Compliance & Declarations

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

The following importer is the responsible party (for FCC matters only):

Company Name: Fantasia Trading LLC
Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US
Telephone: +1 (909) 484-1530

IC Statement

This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

This digital apparatus complies with CAN ICES-3(B)/NMB-3(B).

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A2613 is in compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com

Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Customer Service

Warranty

18-month limited warranty*

*Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.

Technical Support

Lifetime technical support

Contact us:

• Email: support@anker.com
• US: +1 (800) 988 7973 (Mon - Fri 9:00am - 5:00pm PT)
• UK: +44 (0) 1604 936200 (Mon - Fri 6:00 - 11:00 GMT)
• DE: +49 (0) 69 9579 7960 (Mo - Fr 6:00 - 11:00)
• JP: +81 03 4455 7823 (Mon - Fri 9:00 - 17:00 JST)
• CN: +86 4000550036 (Mon - Fri 9:00 - 17:30 CST)