Google Wireless Tag Manual
Product Overview
This document provides instructions and information for the Google Wireless Tag.
Product Diagram: A circular, flat device, approximately 30mm in diameter and 7mm thick. It features a small circular indentation or button on one side. Below it are icons representing app stores: the Apple App Store logo and the Google Play Store logo, with associated text for downloading the application.
[App Store logo] Download on the App Store
[Google Play logo] Get it on Google Play
Product Features
- This wireless tag is a Bluetooth Low Energy (BLE) device.
- It can be used to track items such as keys, bags, or wallets.
- The tag has a built-in speaker that can emit a sound to help you locate it.
- The tag is powered by a CR2032 battery.
- The tag is water-resistant (IPX7).
- The tag has a range of up to 50 meters (164 feet).
Product Diagram & Range
Range Diagram: A circular diagram illustrating the operational range of the wireless tag. A central point represents the tag, and a circle around it indicates the maximum range (labeled 'r'). Text explains that the range is affected by environmental factors and obstacles.
The range of the wireless tag depends on the environment. Obstacles such as walls and other electronic devices can affect the range.
How to Use
- Download the Google Find My Device app from the App Store or Google Play.
- Open the app and follow the on-screen instructions to pair your wireless tag.
- Once paired, you can use the app to locate your tag, play a sound, or mark it as lost.
Battery Replacement
The wireless tag is powered by a CR2032 battery.
Component Diagrams: A series of illustrations showing the wireless tag. One shows the complete circular tag. Another shows the tag separated into two halves, revealing the internal battery compartment. A third image depicts the CR2032 battery being placed within the compartment, noting the positive (+) terminal orientation. The final image shows the tag reassembled.
To replace the battery, gently twist the tag counter-clockwise to open it.
Remove the old battery and insert a new CR2032 battery, ensuring the positive (+) side is facing upwards.
Close the tag by twisting it clockwise until it clicks into place.
Dispose of used batteries properly.
Specifications
- Model: Google Wireless Tag
- Connectivity: Bluetooth Low Energy (BLE)
- Battery: CR2032 (3V)
- Water Resistance: IPX7
- Operating Temperature: -10°C to 50°C (14°F to 122°F)
- Dimensions: 30mm x 30mm x 7mm
- Weight: 10g
Safety Information
⚠️ WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.
- Contains a button cell battery. If swallowed, it can cause severe or fatal internal burns in as little as 2 hours.
- Seek immediate medical attention if swallowed.
- Do not ingest battery.
- Keep batteries away from children.
- Do not attempt to recharge non-rechargeable batteries.
- Do not expose to extreme temperatures or fire.
- Do not disassemble or puncture the device.
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Regulatory Information
- FCC ID: [FCC ID placeholder]
- IC: [IC placeholder]
- CE
- UKCA
- UK
- RoHS
- [WEEE symbol]
- IPX7
