Stander Security Pole & Curve Grab Bar

Product and Contact Information

Stander, Inc.

Tel: 800.506.9901 ? Fax: 435.787.2301 ?

2410 Heritage Dr. • Logan • UT 84321

Email: sales@stander.com ✉️

Website: www.stander.com ?

For assembly instructions and product information in English, visit: www.stander.com/product-manuals

Para obtener instrucciones de montaje e información del producto en Español, visite: www.stander.com/product-manuals

Montageanleitungen und Produktinformationen auf Deutsch finden Sie auf: www.stander.com/product-manuals

Pour obtenir des instructions d'assemblage et des informations sur le produit en Français, visitez: www.stander.com/product-manuals

Per le istruzioni di montaggio e le informazioni sul prodotto in Italiano, visitare: www.stander.com/product-manuals

Limited Warranty

Stander, Inc. ("Stander") warrants to the original purchaser that the Product will be free from material defects in material or workmanship for 2 years from the date of purchase. This limited warranty applies only when the Product is used within its specifications, is non-transferable, and applies solely to the original purchaser.

To make a warranty claim, the original purchaser must notify Stander in writing of the alleged defect during the warranty period and ship the Product, along with proof of purchase, to Stander. All shipping costs are the responsibility of the original purchaser; Stander will not refund or pay for any shipping charges.

If Stander determines, at its sole discretion, that a material defect exists, Stander will replace the Product and ship a replacement to the original purchaser.

The Limited Warranty does NOT apply to any Product:

• Damaged during shipment.
• Damaged due to unauthorized attachments, alterations, or modifications.
• Damaged due to failure to install the product according to Stander's instructions.
• Damaged by use for purposes other than those for which the Product was designed or intended.
• Damaged due to abuse, misuse, mishandling, neglect, misapplication, accident, or abnormal use or storage.

STANDER MAKES NO WARRANTIES OTHER THAN THOSE EXPRESSLY SET FORTH HEREIN. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR IMPLIED WARRANTIES ARISING FROM COURSE OF DEALING, USAGE OF TRADE, ADVERTISING, OR PERFORMANCE OF PRODUCTS TO STANDARDS SPECIFIC TO THE COUNTRY OF IMPORT, ARE EXPRESSLY DISCLAIMED.

THIS LIMITED WARRANTY IS THE FULL AND COMPLETE STATEMENT OF STANDER'S LIMITED WARRANTY, SUPERSEDES ALL OTHER STATEMENTS, AND CANNOT BE VARIED BY ANY ORAL OR OTHER WRITTEN STATEMENT. THE EXCLUSIVE REMEDY FOR BREACH OF THIS LIMITED WARRANTY IS TO RETURN THE PRODUCT FOR REPLACEMENT OF THE NONCONFORMING PRODUCT.

UNDER NO CIRCUMSTANCES SHALL STANDER, INC. BE LIABLE FOR ANY SPECIAL, INCIDENTAL, EXEMPLARY, PUNITIVE, CONSEQUENTIAL DAMAGES, OR OTHER DAMAGES, BASED UPON BREACH OF THIS LIMITED WARRANTY, BREACH OF CONTRACT, OR STRICT LIABILITY.

Some states do not allow limitations on how long an implied warranty lasts. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To obtain service under this Limited Warranty, contact Stander at (800) 506-9901 or (435) 755-0453.

Warnings

Security Pole & Curve Grab Bar, Item # 1100: This device is intended to assist disabled persons to provide moderate weight support while sitting or standing.

General Use and Installation Warnings:

• Do not use or install this product unless you read and understand these warnings and instructions. If you have any questions, call Stander at (800) 506-9901 or (435) 755-0453.
• Do not alter the product or vary its intended use.
• Children should not be allowed to hang on or play with this product.
• No external items should be attached to this product.
• This product is for adult use only. It is not intended for individuals with paralysis, dementia, sleeping disorders, incontinence, uncontrolled body movement, or those unable to walk safely without assistance. It should not be used by individuals suffering from confusion, restlessness, or under the influence of medications, drugs, or any substance that could impair balance or judgment. Consult a physician if you have questions. This product is not intended to carry the full weight of an individual; it provides balance and support while sitting and standing.
• If used in a nursing home, assisted living center, or similar facility, follow these instructions and the institution's installation policies. Do not install if it does not comply.
• SAFETY PRECAUTIONS: Serious injury or harm can result from improper installation. Do NOT install on angled ceilings, suspended ceilings, or any ceiling type that would not allow the product to be properly secured between a floor and ceiling. The pole must be installed perpendicular to the floor and ceiling. All protective rubber pads should engage the ceiling and floor with equally distributed force.
• If the product is removed, it must be reinstalled per the ASSEMBLY INSTRUCTIONS.
• Regularly check the product to ensure it is installed and positioned correctly. Do not use on unstable surfaces or platforms. This product is not intended for use inside a bathtub or shower.
• Additional safety measures are required for high-risk users, including those who are not mentally conscious, users with size or weight conditions, or any condition impairing their ability to use the product without assistance.
• DISCLAIMER: Neither Stander nor the manufacturer are liable for any harm or injury resulting from improper use or assembly.
• For concerns or questions, contact Stander at (800) 506-9901.
• In the rare event of a serious incident, contact customer service immediately at (800) 506-9901 or (435) 755-0453 and report to the competent authority. A serious event is defined as death or serious deterioration in health resulting in life-threatening illness, permanent impairment, hospitalization, or surgical intervention.

⚠️ WARNING ENTRAPMENT AND FALL HAZARD

• Do NOT use or place near any type of bed. Use on a bed may result in entrapment risk. Stander Inc. recommends NOT installing the product closer than the user's safe walking distance around the pole, to prevent entrapment between the pole and adjacent objects. Small gaps between the pole/swivel handle and stationary objects can entrap and kill.
• The Security Pole uses a spring-loaded pin that allows the handle to rotate and lock into several positions. Ensure the rotating handle is in a locked position before use. Failure to do so may result in falls and serious injury.
• People with Alzheimer's disease or dementia, or those who are sedated, confused, or frail, are at increased risk of entrapment and falls.
• Do NOT install the product on rugs or any other moveable objects. Do NOT install on floor conditions that would allow the base of the pole to slide or slip. If the base moves after installation, the product is not safe to use.
• Failure to comply with these conditions could put the user(s) at risk of entrapment or falling.

Specifications

Hardware / Tools:

G: [Tool/Wrench Symbol]
H: [Screw Symbol] (2x)
J: [Pin Symbol] (4x)
K: [Clip Symbol] (2x)

Assembly Instructions

Step 1: Remove the product from its box and identify all parts as shown in FIGURE 1. The parts are labeled A through F.

Step 2: Insert part A into part B. Align the holes on both parts and insert pin J. Secure the connection by inserting clip K through pin J. Note: For a 7-foot ceiling, remove part B and attach part A directly to part C, then proceed to Step 4.

Step 3: Determine the required height between the floor and ceiling. Align the appropriate hole in part B with the corresponding hole in part C. Insert pin J and secure with clip K. The diagram shows height indicators for 8' (2.43m), 9' (2.74m), and 10' (3.04m).

Step 4: Twist part D to its highest position. Insert part C into part E.

Step 5: Place part F on the floor at the desired installation location. Insert part E into part F. Ensure that the half-hole in part E is positioned around the rod in part F.

Step 6: While ensuring the product is level, tighten part D using tool G. Continue tightening until the product is securely held between the floor and ceiling with absolutely no sliding.

Step 7: To rotate the grab bar handle (part E), pull the Spring Pin. Rotate part E to the desired position. Release the Spring Pin and rotate part E further until the pin locks securely into place.

Step 8: (OPTIONAL) For additional security, use the provided screws (H) as shown in FIGURE 8. Ensure screws H pass through the ceiling joists. If the floor is ceramic or concrete, drill pilot holes first.