Elite Controller Outline Dimension Drawing

Product Overview

This document provides the outline dimensions and technical specifications for the Elite controller, model number 100190. The controller is designed for linear motion applications and features input/output connectors, a power indicator light, and clear labeling for Power Light, Input, Output1, and Output2.

Dimensions

The device is presented with multiple views to illustrate its physical characteristics:

Main/Isometric View:

The primary view shows the controller from an angle. It is a rectangular prism with integrated heatsink fins on one end. The overall length is 319.6 mm. The model number "100190" is prominently displayed on the main body.

Front View:

This view shows the front of the controller. Key dimensions include:

• Overall Width: 80 mm
• Overall Height: 65.4 mm
• Height at connector end: 36.7 mm

Multiple wires or cables exit from one end of the controller.

Side View:

This view shows the side profile of the controller. The thickness is 25.5 mm. It also shows the arrangement of the heatsink fins and the cable exit.

Cable and Connector Details:

Specific dimensions related to the cable exit and internal wiring are noted:

• Cable exit configuration: 4-2 (potentially indicating 4 wires with 2mm spacing or diameter)
• Cable exit configuration: 2-35 (potentially indicating 2 wires with 3.5mm spacing or diameter)
• Corner radius detail: 8-R2.5 (indicating a radius of 2.5 mm on specific corners)

Technical Requirements

The following technical requirements are specified for the Elite controller:

1. Cable length is customizable, and cable specifications must comply with UL requirements.
2. The protection level is rated as IP66.
3. The controller uses JC-compatible male and female waterproof connectors.

Revision Information and Specifications Table

The table below details the drawing's revision history and general specifications:

Manufacturer: Zhejiang Jiecang Linear Motion Technology Co., Ltd.