Interphone Air Pump 3000
Manual
Model Code: INTERPHOAIRPUMP3K
Product Information
| Product name | Air pump 3000 |
| Product Brand | Interphone |
| Power input | Type-C 10W (5V2A) |
| Rated power | 60W |
| Barometric range | 0-150PSI |
| Inflation time | < 3 min (motorcycles tyre) |
| Charging time | 1.5 h |
| Operating temperature | -20°C~60°C |
| Shell material | ABS |
| Capacity | 3150mAh |
Parts List
- Long air nozzle ×1
- Ball needle ×1
- Gas-filled pipe ×1
- Type-C charging cable ×1
- Sanding bag ×1
- Instruction book ×1
User Guide
Charging
1. Plug the charger into the socket and connect the power cable to the product for charging.
[Diagram: The Interphone Air Pump 3000 is shown connected via a USB-C cable to a power adapter, which is plugged into a wall socket.]
2. Disconnect the charger and cable after the product is fully charged.
[Diagram: The Interphone Air Pump 3000 is shown disconnected from the USB-C cable and power adapter.]
Tip: For the best charging performance, use the included cable to charge the product.
Check The Battery Level
Method: After turning on, the screen will display the current battery level.
[Diagram: A close-up of the Interphone Air Pump 3000's digital display showing battery status and pressure readings. A finger is shown pressing the central control button.]
Inflation Function Description
1. Take out the air hose and connect the inflator head.
[Diagram: The flexible air hose is shown with various nozzles (e.g., Schrader, Presta, ball needle) and the inflator head. The inflator head is being attached to the side of the Interphone Air Pump 3000.]
2. Choose the right air nozzle to inflate your items.
[Diagram: The Interphone Air Pump 3000 is shown with the air hose attached. Several different air nozzles are displayed next to it, ready to be connected to the hose.]
3. Press the switch button.
[Diagram: The Interphone Air Pump 3000's digital display is shown. A finger is pressing the central control button.]
4. Select the desired mode.
[Diagram: The Interphone Air Pump 3000's digital display shows a pressure reading of "35.0 PSI". A finger is shown pressing the central control button, indicating mode selection.]
5. Use [plus-button] or [minus-button] to adjust the air pressure.
[Diagram: The Interphone Air Pump 3000's digital display shows a pressure reading of "35.5 PSI". A finger is shown pressing the [plus-button].]
6. Press the [control-button] to inflate. After the inflation is complete, the product will automatically close.
[Diagram: The Interphone Air Pump 3000 is shown connected to a motorcycle tire valve and inflating it. The digital display shows the pressure increasing.]
Tips
- If the tire pressure value of the inflatable item is higher than the preset value, the product will not work.
- PSI, BAR, and KPA are units, not pressure levels.
- The pump is not compatible with large capacity objects; Such as air mattresses and air swimming pools.
- Please inflate the item according to the recommended pressure.
Troubleshooting
If the tire fails to inflate, check the possible causes in order
- Product power level is insufficient [low-battery-icon]
- The air pipe is not connected correctly [disconnected-pipe-icon]
- The preset tire pressure value is lower than the current tire pressure
- The stem nozzle of the tire is blocked by a foreign object [blocked-nozzle-icon]
- The user forgot to press the Start button after the preset value
- Contact Interphone for after-sales support
Boot Failure
- The battery is low or the product is charging [low-battery-icon]
- The product cannot be turned on while charging
- Contact Interphone for after-sales support
