Interphone Ridesync User Manual and Installation Guide

Introduction

The Interphone Ridesync is a smartphone display mirroring device designed for motorcycles. It replicates the display and functionality of apps compatible with Apple CarPlay and Android Auto technologies directly on your device. It is not a standalone satellite navigator, music player, or vehicle instrumentation.

Safety Warnings and Precautions

Important! Read before use!

• Failure to observe instructions may result in death or serious injury.
• Improper configuration or use increases the risk of death, injury, or device damage.
• Use with caution and exercise judgment.
• Do not get distracted while driving; minimize time spent looking at the device.
• Users are responsible for complying with regulations limiting electronic device use while driving.
• Always obey traffic laws and signs.

Correct Mounting

Do not mount the device where it obstructs road view, vehicle controls, or safety functions.

Audio Systems (Intercoms)

Ridesync does not connect to Bluetooth headsets or intercoms. It is recommended to connect your phone directly to your Bluetooth headset.

Water Resistance

The device has IPX6 level waterproofing when stored, used, and mounted correctly. Do not immerse in water.

User Instructions

• The capacitive touchscreen may not function with motorcycle gloves.
• Raindrops might trigger commands.
• Do not open the device, as this is dangerous and voids the warranty.
• Clean the screen only with a soft, dry cloth. Do not use liquid detergents.

Technical Specifications

• Product: INTERPHORIDESYNC
• Model: RIDESYNC
• Bluetooth: v. 4.0 - Class 2, Frequency 2.402-2.480GHz, Power 20dBm
• Wi-Fi: Frequency 2.4G (2400MHz-2500MHz) / 5G (5150MHz-5250MHz), Power 15 dBm
• Operating Temperature: -20°C to 70°C
• Dimensions: 85mm x 49mm x 25mm
• Power Supply: 5V DC, 2.5A
• Weight: 182g
• Compliance: CE Declaration of Conformity (Directive 2014/53/EU, 2011/65/EU). Full text available at www.cellularline.com/declaration-of-conformity.

Handlebar Mount Installation

Follow these steps to install the handlebar mount:

1. Apply the chosen spacer onto the handlebar.
2. Install the mount onto the handlebar.
3. Screw and tighten the mount securely.
4. Lock the mount into place.

Mount Adjustment

To adjust the mount's orientation: Unscrew, rotate, and then screw it back into position.

Locking Mechanism

To lock the device: Insert, push, and rotate the mount 45 degrees.

Unlocking Mechanism

To unlock the device: Push and rotate the mount 45 degrees.

Note: The Ridesync is compatible with various Interphone Quiklox mounts. Visit www.interphone.com for more information.

Powering the Device

Ridesync can be powered in two ways:

1. 12V Adapter: Connect the power cable with a 12V adapter. Connect the Yellow "B+" cable to the positive battery terminal, the Red "ACC" cable to the key-switched power, and the Black "GND" cable to the negative battery terminal. Wiring installation should be performed by experienced personnel.
2. USB-A Port: Connect the provided USB cable to a USB-A port (in a motorcycle or car). The cable is waterproof. Important: Only use a USB-C to USB-A cable; USB-C to USB-C cables are not supported.

Visual representation: An image shows correct (USB-C to USB-A) and incorrect (USB-C to USB-C) cable connections for power.

First Use and Pairing

Pairing is required only during the initial setup:

1. Connect Ridesync to power.
2. Enable Bluetooth and Wi-Fi on your smartphone.
3. On the Ridesync screen, press the "CarPlay" icon for Apple smartphones or the "Android Auto" icon for Android smartphones.
4. Follow the on-screen instructions to complete the pairing process.

Visual representation: Images show the smartphone home screen on Ridesync and the subsequent pairing screens.

Usage

Once paired, Ridesync displays your smartphone's HOME screen upon power-up. Refer to your phone's manual for detailed CarPlay/Android Auto operation.

If the phone is not connected, the Ridesync startup screen appears, allowing you to:

• Initiate CarPlay/Android Auto connection.
• Adjust brightness (automatic or manual).
• View the recommended audio device connection diagram.
• Modify settings (e.g., change language, reset pairings).

A quick menu can be accessed by pressing the circle icon on the screen (the cursor can be moved). This menu can be disabled via the settings.

Visual representation: Images show the smartphone home screen, the quick menu access, and the settings menu.

Disposal (WEEE)

The crossed-out wheelie bin symbol on the product, literature, or packaging indicates that this product, its batteries, and accumulators must be collected separately at the end of their working life. This applies to the EU and other regions with separate collection systems. To prevent environmental or health damage from uncontrolled waste disposal, do not dispose of this product as unsorted municipal waste. Take it to an official collection point for recycling.