Fujifilm Instax Mini 90: User Manual and Troubleshooting
Product Information
This document provides comprehensive information for the Fujifilm Instax Mini 90 instant camera, including operating instructions, troubleshooting guides, specifications, and safety notices.
Model Numbers: CPL3B083-103, FFBX-810301
Troubleshooting Guide
During Operation
| Problem | Possible Causes | Solutions |
|---|---|---|
| The shutter won't trip. | 1. The battery power is low. 2. The battery is not inserted correctly. 3. The flash is charging (indicated by blinking). 4. The exposure counter is showing " " sign. | 1. Charge the battery or insert a fully-charged spare battery. 2. Insert the battery correctly. 3. Wait until the flash indicator stops blinking. 4. Unload the film pack, and load a new film pack. |
| The film pack won't load into your camera, or won't load into your camera smoothly. | 1. The film pack is not for your camera. 2. You are not loading the film pack correctly. | 1. Use Fujifilm Instant Color Film "instax mini" only. 2. Match the yellow line on the film pack with the yellow positioning mark in your camera. |
| The film cover cannot be ejected. | 1. You have inserted the battery after loading the film pack. 2. The battery power is low. 3. The film pack cannot be recognized. | 1. Insert the battery, turn the camera on, then load the film pack. 2. Charge the battery or insert a fully-charged spare battery, turn the camera on, then reload the film pack. 3. Remove the film pack, then reload it. Load a new film pack if the film has been exposed. |
| The film is ejected unintentionally. | The back cover was opened and then closed. | Load a new film pack if the film has been exposed. |
| Power is turned OFF though the shutter release button is pressed. | The battery power is low. | Charge the battery or insert a fully-charged spare battery. |
| The LCD looks black. | The camera was put in too hot a place. | Put the camera in a cool place. The LCD returns to normal after a while. |
Printed Pictures
| Problem | Possible Causes | Solutions |
|---|---|---|
| The finished print looks overexposed (White in color). | 1. The ambient temperature is low (below +5°C). 2. The background is too dark in comparison with the subject. 3. The AE light sensor window or flash sensor window is blocked. | 1. Before taking pictures, place your camera in a warm place. When the picture comes out of your camera, warm it up in your breast pocket. 2. Press the lighten-darken control button to set to [DARKEN]. 3. Be careful how you hold the camera so that the AE light sensor or flash sensor window is not blocked. |
| The finished print looks underexposed (Dark). | 1. The ambient temperature is high (above +40°C). 2. The picture was taken into the light. 3. The flash lamp face, AE light sensor window or flash sensor window was covered. 4. The background is too bright in comparison with the subject. 5. The flash light did not reach the subject. | 1. Keep camera, film (exposed prints) away from excessive heat (+40°C). 2. Take pictures with the light behind you, or take pictures using Fill-in Flash Mode. 3. When holding your camera, be careful not to cover the flash lamp face with your finger or strap. 4. Press the lighten-darken control button to set to [LIGHTEN]. 5. Take pictures within 0.3 to 2.7m from the subject. |
| The picture is out of focus. | 1. The shooting range is too close to the subject. 2. The subject is not properly in focus. 3. The lens is not clean. 4. Your camera was shaken when taking the picture. | 1. Take pictures with a distance of at least 0.6m between you and your subject, or take pictures with the macro mode. 2. Do not stand too close to your subject. 3. Please contact a FUJIFILM authorized distributor. 4. Hold your camera firmly and press the shutter release button gently. Since the slow shutter is selected when shooting in the Party, Bulb, or Flash off mode, fixing the camera using a table, tripod, etc. is recommended. |
| The picture is blurred. | 1. A pressure was applied to the picture immediately after coming out from the camera. 2. The picture did not come out smoothly. | 1. Do not press onto or fold the picture. 2. Do not block the film exit with your finger. |
| The subject in the viewfinder has shifted in finished print. | The shooting range is too close to the subject. | Take pictures with a distance of at least 0.6m between you and your subject. Take pictures with the macro mode. |
Specifications
English
| Category | Details |
|---|---|
| Film | Fujifilm Instant Color Film "instax mini" |
| Picture Size | 62 x 46 mm |
| Lens | Move in/out type Lens, 2 components, 2 elements, f=60mm, 1:12.7 |
| Viewfinder | Real image finder, 0.37x, with target spot and parallax correction function for macro mode |
| Focusing | Motor-driven 3-range switching: 0.3 - 0.6m / 0.6 - 3.0m / 3.0m - , shooting range: 0.3m - Macro Mode (0.3 - 0.6m) Normal Mode (0.6 - 3.0m) Landscape Mode (3.0m - ) |
| Shutter | Programmed electronic shutter release, 1.8 - 1/400 sec. shutter speeds, Bulb mode (Max. 10 seconds) |
| Shutter Release | 2 shutter release buttons (vertical shooting / horizontal shooting) |
| Exposure Control | Automatic, Interlocking range (ISO 800): LV5.0 - LV15.5, Exposure compensation (Lighten-Darken Control): -2/3EV, +2/3EV, +1EV |
| Film Feeding Out | Automatic |
| Flash | Built-in, Automatic electronic flash, Auto mode (Intelligent Flash for Brighter Backgrounds), Fill-in Flash Mode, Flash off Mode, Red-eye removal Mode |
| Self-Timer | Electronically controlled, approx. 10 second delay, Continuous shooting mode, can be stopped mid-run |
| Liquid Crystal Display (LCD) | Exposure counter (number of unexposed films), Shooting mode (Party, Kids, Landscape, Double-exposure, Bulb), Macro, Lighten-darken control, Flash control mode, Self-timer mode (1 frame / 2 frames continuous shooting) |
| Power Supply | One NP-45S battery, Capacity: 10 film packs (Based on our test conditions) |
| Others | With tripod socket |
| Dimensions & Weight | 91.9 x 113.4 x 57.2 mm / 296g (without battery, strap and film pack) |
Safety Information
General Precautions
- This product is a precision instrument. Handle with care to avoid damage.
- Keep the camera away from water, sand, and extreme temperatures.
- Do not use straps not designed for cameras, as they may not be strong enough.
- When using a tripod, ensure it is stable and mount the camera carefully. Do not carry the camera while mounted on a tripod.
- If the camera is not in use for an extended period, remove the batteries and store it in a cool, dry, dust-free place.
- Clean the lens and viewfinder with a soft cloth or air blower. Do not use solvents.
- Keep the film chamber and interior clean to prevent film damage.
- Avoid exposure to moth repellent gases like naphthalene.
- If the camera malfunctions, remove and reinsert the batteries.
- Operating temperature range: +5°C to +40°C.
Film and Print Care
- Store film in a cool, dry place. Avoid high temperatures.
- Use film packs promptly after loading.
- Allow film to acclimate to room temperature before use if stored in extreme temperatures.
- Use film before the expiration date.
- Avoid X-ray inspection of luggage at airports; carry film and camera as carry-on luggage.
- Store prints in a cool, dry place away from direct light.
Battery Safety
- WARNING: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to instructions. Store batteries out of reach of children.
- Never attempt to disassemble batteries. Do not expose to heat, fire, or short-circuit them.
- CAUTION: Ensure correct battery polarity. Damaged batteries or electrolyte leakage can cause fire, injury, or environmental contamination.
Product Handling Warnings
- WARNING: Never disassemble the product. Danger of electric shock. Do not touch internal parts if exposed. Remove batteries immediately if the camera overheats, smokes, smells burnt, or shows unusual signs.
- WARNING: Avoid flashing too close to eyes, especially infants and children.
- WARNING: Remove batteries immediately if the camera gets wet or foreign objects enter.
- WARNING: Do not use near flammable gases or volatile substances. Risk of explosion or fire.
- WARNING: Store out of reach of children to prevent choking hazards (e.g., from straps).
- CAUTION: Never get the product wet or handle with wet hands. Danger of electric shock.
- CAUTION: Do not use flash on people operating vehicles or animals, as it may cause accidents.
- CAUTION: Do not touch moving parts inside the camera.
- CAUTION: Ensure the battery cover is attached during use.
Regulatory Information
- The "CE" mark indicates compliance with EU safety, health, and environmental standards.
- FCC Statement (USA): This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Canada: This Class B digital apparatus complies with Canadian ICES-003.
- Battery Recycling: This product is powered by a recyclable lithium-ion battery. Contact 1-800-8-BATTERY for recycling information.
- WEEE Disposal: This symbol indicates the product should not be treated as household waste. It must be taken to an applicable collection point for recycling electrical and electronic equipment.
Contact Information
For inquiries about this product, please contact a FUJIFILM authorized distributor or visit the website provided.
