ACT 10G Ethernet Media Converter

Model: AC4455

Convert Fiber to Copper Ethernet

This diagram illustrates the AC4455 converting fiber optic signals to copper Ethernet. It shows an 'Ethernet Device with Fiber interface' connected via an SFP+ port to the AC4455. The AC4455 then connects via a UTP port to an 'Ethernet Device without Fiber interface'.

Extend your Network with Fiber

This diagram shows how to extend a network using the AC4455. It depicts an 'Ethernet Device without Fiber interface' connected via UTP to an AC4455. This AC4455 is then connected via fiber (SFP+) to another AC4455, which in turn connects via UTP to another 'Ethernet Device without Fiber interface', extending the network's reach.

Device Overview and LED Indicators

The front panel of the AC4455 features an SFP+ port for fiber connections and a UTP port for copper Ethernet connections. It also includes status LEDs:

[Power LED] (PWR): Indicates power status.
[10Gbps Link/Activity LED] (10G LINK ACT): Shows 10Gbps speed when active, or 10/100/1000Mbps speed when inactive.
[Fiber Signal Status LED] (SD): Indicates if a fiber signal is detected.

LED Description Table

LED	Function	Status	Description
[Power LED]	Power LED	On	Power is on
[Power LED]	Power LED	Off	Power is off
[10Gbps Link/Activity LED]	10G Speed Active	On	10Gbps speed
[10Gbps Link/Activity LED]	10G Speed Active	Off	10/100/1000Mbps Speed
[Fiber Port Link/Action LED]	Fiber Port (FP) Link/Action Status LED	On	Fiber Port is linked
[Fiber Port Link/Action LED]	Fiber Port (FP) Link/Action Status LED	Blink	Fiber Port has data
[Fiber Port Link/Action LED]	Fiber Port (FP) Link/Action Status LED	Off	Fiber Port is not linked
[UTP Port Link LED]	UTP Port (TP) Link Status LED	On	UTP Port is linked
[UTP Port Link LED]	UTP Port (TP) Link Status LED	Off	UTP Port is not linked
[Fiber Signal Status LED]	Fiber Signal Status LED	On	Fiber Signal is detected
[Fiber Signal Status LED]	Fiber Signal Status LED	Off	Fiber Signal is not detected
[UTP Port Action LED]	UTP Port (TP) Action Status LED	Blink	UTP Port has data
[UTP Port Action LED]	UTP Port (TP) Action Status LED	Off	UTP Port has no data

DIP Switch Configuration

The AC4455 features DIP switches for configuring various functions:

DIP Switch 1

ON: LFP (Link Fault Pass-through) function enabled.
OFF: LFP function disabled.

DIP Switches 1 and 3

ON: Bypass mode enabled.
OFF: Bypass mode disabled.

DIP Switches 1, 2, 3, 4

All OFF: LFP function disabled, Adaptive mode enabled.

Important Information

Safety Instruction: For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be easily accessible.

Manufacturing: Made in China. For Indoor Use Only.

Compliance: For ERP/ECO design 2019/1782/EU Compliant statement, visit www.act-connectivity.com/AC4455.

Power Specifications: Input: 100-240V~50/60Hz, 0.4A Max. Power: 12.0Watt.

Recycling: This device and its accessories are recyclable. Please deposit at a store or waste disposal center. [Recycling symbols]

Warranty: 5 Year Warranty.

Manufacturer: ACT, Koolhovenstraat 1E, 3772 MT Barneveld, The Netherlands.

For service, manuals, firmware, or updates, visit www.act-connectivity.com.

	ACT AC7810 HDMI Extender Set 60m: High-Quality Video Extension with 3D and IR Support This document provides a comprehensive user manual for the ACT AC7810 HDMI extender set. Learn about extending HDMI signals up to 60 meters over CAT5e/CAT6 cables, featuring 3D and IR support. Includes installation guides, panel descriptions, safety warnings, and warranty information.
	ACT AC4418 Gigabit Ethernet Switch 8 Port Quick Install Guide Quick installation guide for the ACT AC4418 8-Port Gigabit Ethernet Switch, including safety information, technical specifications, and ERP compliance details.
	TD168F ACT Field Termination Plug RJ45 CAT6A Shielded Installation Guide Step-by-step instructions for installing the TD168F ACT Field Termination Plug for CAT6A shielded RJ45 Ethernet cables. Includes wire preparation, termination, and cable specifications.
	ACT Black 1.5m U/UTP CAT6A LSZH Slimline Patch Cable Detailed specifications for the ACT Black 1.5 meter U/UTP CAT6A LSZH Slimline patch cable with 90-degree angled RJ45 connectors. Features include LSZH jacket, 28AWG copper conductors, 50µ gold-plated contacts, and support for PoE+.
	ACT AC4410 Gigabit USB Networking Adapter Quick Start Guide This guide provides essential information for setting up the ACT AC4410 Gigabit USB Networking Adapter, including driver downloads and connection instructions.
	ACT 5e Digital Keypad Installation and Programming Guide Comprehensive guide for installing and programming the ACT 5e Digital Keypad, covering surface and flush mounting, wiring, and programming features like user codes, relay timing, and backlighting. Includes troubleshooting for factory defaults and incorrect code lockout.
	ACT Declaration of Conformity - USB4® 20Gbps USB-C Cables (AC7420, AC7421, AC7422) Official Declaration of Conformity from ACT for their USB4® 20Gbps USB-C cables, models AC7420, AC7421, and AC7422. Confirms compliance with relevant EU regulations including EMC and RoHS directives.
	ACT Head Impact Tracker User Manual: Monitor Head Impacts Comprehensive user guide for the ACT Head Impact Tracker and ACT Head Impact Tracker Pro head sensors. Learn about setup, usage, features, and safety guidelines for monitoring head impacts.