BORMANN Elite BTW5022 Mixer Tap

Mounting Instructions

Follow these steps to install the mixer tap:

1. Fix the two pieces of flexible hose (07) for water inlet onto the mixer body (01).
2. Fix the o-ring (02) onto the bottom ring of the base, and then screw the screw pole (05) onto the mixer body (01).
3. Put the mixer body (01) onto the table-board.
4. Put the rubber washer (03) and iron washer (04) onto the screw pole (05), then screw the nut (06) onto the screw pole (05) to fix the mixer body (01).

Assembling Parts Diagram Description

The following parts are included for assembly:

• Component 01: Mixer body (main tap unit with spout and handles).
• Component 02: O-ring.
• Component 03: Rubber washer.
• Component 04: Iron washer.
• Component 05: Screw pole (threaded rod).
• Component 06: Nut.
• Component 07: Two flexible hoses for water inlet.

These parts are used to securely attach the mixer tap to a surface.

Important Notes and Disclaimers

The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice, unless these changes significantly affect the performance and safety of the products. The parts described/illustrated in this manual may also concern other models of the manufacturer's product line with similar features and may not be included in the product you just acquired.

This equipment is not designed for use in commercial, trade, or industrial applications. The warranty will be voided if the product is used in commercial, trade, or industrial businesses or for equivalent purposes.

To ensure the safety and reliability of the product and warranty validity, all repair, inspection, repair, or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.

Environmental Information

Please dispose of packaging responsibly. [recycling symbol]

Do not dispose of electrical goods in household waste. [crossed-out bin symbol]