BORMANN Elite BTV1150 Articulating TV Wall Mount
Model: BTV1150 | Product Code: 025986
Product Overview
The BORMANN Elite BTV1150 is an articulating TV wall mount designed to securely hold televisions and provide flexible viewing angles. It supports TVs from 37 to 70 inches and has a maximum load capacity of 50 kg (110 lbs). The mount offers a tilt range of -15° to +15° and an adjustable profile from 60 mm to 510 mm, accommodating VESA mounting patterns up to 600x400mm.
Technical Data
| Feature | Specification |
|---|---|
| Product Name | Articulating TV Wall Mount |
| Model | BTV1150 |
| TV Size Compatibility | 37" - 70" |
| Load Capacity | 50 kg (110 lbs) |
| Tilt Range | -15° to +15° |
| Profile (Min-Max) | 60 mm - 510 mm |
| Max. VESA Pattern | 600x400 mm |
Safety Instructions
Please read and understand all instructions before beginning any installation or assembly work. If you have questions, contact your local distributor.
- Caution: Using products heavier than the rated weight may result in instability and possible injury.
- Mounts must be attached as specified in the assembly instructions. Improper installation can lead to damage or serious personal injury.
- Always use safety gear and proper tools. This product should only be installed by professionals.
- Ensure the supporting surface can safely support the combined weight of the equipment and all attached hardware and components.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Outdoor use may lead to product failure and personal injury.
- Important: Ensure all parts are received according to the component checklist before installation. Contact your local distributor for missing or faulty parts.
- Maintenance: Check that the bracket is secure and safe to use at regular intervals (at least every three months).
Assembly Instructions
Parts Included
- Wall Mount (x1)
- Arm (x2)
Hardware
- A: Screws (x6)
- B: Concrete Anchors (x6)
- C: Concrete Anchors (x6)
- D: M5x12 Screws (x4)
- E: M6x16 Screws (x4)
- F: M8x16 Screws (x4)
- G: M6x30 Screws (x4)
- H: M8x30 Screws (x4)
- I: Spacers (x4)
- J: Small Spacers (x4)
- K: Big Spacers (x4)
Tools Required
- 4mm Allen Key (included)
- Drill
- Screwdriver
- Level
Step 1: Prepare the Wall Mount
Select a suitable location on your wall. Using the wall mount as a template, mark the drilling points. Ensure the wall is capable of supporting the weight. Drill holes and insert anchors (B, C) if necessary, depending on your wall type (e.g., concrete, wood studs). Attach the Wall Mount securely to the wall using screws (A).
Step 2: Attach Arms to Wall Mount
Attach the two Arms to the Wall Mount. Ensure they are oriented correctly and secured with the appropriate hardware.
Step 3: Attach Brackets to TV
Identify the correct VESA mounting holes on the back of your TV. Attach the mounting brackets (part of the Arm assembly) to the TV using the provided screws (D, E, F, G, H) and spacers (J, K) as needed to ensure a flush fit and proper alignment. Use a screwdriver to tighten the screws securely.
Step 4: Mount TV to Wall Mount
With assistance from another person [two people], carefully lift the TV and align the brackets attached to the TV with the Wall Mount. Hook the TV onto the Wall Mount. Ensure it is properly seated.
Step 5: Secure and Adjust TV
Secure the TV to the Wall Mount using the locking mechanism, typically involving a screw (L) that prevents the TV from being accidentally dislodged. Adjust the tilt angle between -15° and +15° as desired. The mount also allows for horizontal swivel and articulation up to 180°.
Manufacturer Notes
The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice, provided these changes do not significantly affect performance or safety. Parts described or illustrated may apply to other models in the product line and might not be included with your specific purchase.
For product safety, reliability, and warranty validity, all repair, inspection, or replacement work, including maintenance and special adjustments, must be performed exclusively by authorized service technicians. Always use the product with the supplied equipment. Using non-provided equipment may cause malfunctions, serious injury, or death. The manufacturer and importer are not liable for injuries or damages resulting from the use of non-conforming equipment.
