Brook Ras1ution Racing Wheel Converter
User Guide and Setup Instructions
Introduction
The Brook Ras1ution is a versatile racing wheel converter that enhances compatibility for gamers using racing wheels with various gaming consoles and PC. This guide details the setup process, configuration options, and additional features.
Getting Started: Step-by-Step Setup
Step 1: Connect the Ras1ution Converter to Your Console
Connect the Ras1ution converter unit to your gaming console using a USB cable.
Diagram shows the Ras1ution converter unit being connected to various consoles: PlayStation 3 (PS3), PlayStation 4 (PS4), Nintendo Switch, Xbox 360, and Xbox One.
Step 2: Connect Your Racing Wheel
Connect your racing wheel controller to USB port 1 on the Ras1ution converter.
Diagram illustrates a racing wheel controller's USB cable being plugged into USB port 1 on the Ras1ution converter.
Step 3: Select Your Gaming Platform
Press the Start button on the Ras1ution converter. Use the left or right directional buttons to cycle through and select the correct gaming platform (e.g., PlayStation 3, PlayStation 4, Nintendo Switch, Xbox 360, Xbox One). Once the desired platform is displayed, press the Start button again to save the selection.
Visuals display icons for PlayStation 3, PlayStation 4, Nintendo Switch, Xbox 360, and Xbox One. An instruction indicates to press the Start button to save the selected platform.
Step 4: Configure Advanced Settings
Access the settings menu to customize options such as Force Feedback Strength (adjustable in +/- 5 stages), Steering Range (adjustable in +/- 5 stages), and Language. Press the Start button to confirm and save your chosen settings.
Visuals show interface elements for adjusting Force Feedback Strength, Steering Range, and Language. An instruction to press the Start button to save is present.
Step 5: Fine-Tune and Save Settings
Within the Force Feedback Strength and Steering Range adjustment pages, use the left and right directional buttons to increase or decrease the values. Press the Start button to save any adjustments. To revert to default settings, press the down directional button. To return to the previous menu, press the up directional button.
Diagrams show controls for adjusting settings (left/right arrows), a save action (Start button), a reset action (Down arrow), and a back action (Up arrow). A percentage indicator from 0% to 100% is also shown.
Nintendo Switch Specific Setup: Wired Communication
For Nintendo Switch users, ensure Pro Controller Wired Communication is enabled. On the Switch console, navigate to System Settings, then select Controllers and Sensors. Find the "Pro Controller Wired Communication" option and switch it ON.
Visual shows the Nintendo Switch system menu path: System Settings -> Controllers and Sensors -> Pro Controller Wired Communication, with an instruction to set it to ON.
Mobile App and Firmware Updates
Brook offers the Ras1ution app, available for download on the App Store and Google Play. This application allows users to set and save custom modes, with profiles stored on their mobile device for convenient use across different locations.
Firmware for the Ras1ution converter can be updated by connecting to a PC or via Bluetooth. Users should check the device's screen for current Bluetooth and firmware version information.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and a human body.
