Deerma BY200 Suction Vacuum Cleaner & Fabric Scrubber

Product Overview

The Deerma BY200 is a multifunctional water-suction sweeper and fabric scrubber designed for deep cleaning of household fabrics. It offers dual-mode cleaning with normal temperature water and hot water to disintegrate stubborn dirt. The device features spray, wash, and suction functions, a large capacity double water tank system for extended use, and 360° universal wheels for easy maneuverability.

Manufacturer: Guangdong Deerma Technology Co., Ltd.

Website: http://www.deerma.com

Precautions

Please read the following precautions carefully before operating the product. This appliance is intended for normal household use only.

1. This product is not suitable for individuals with physical, sensory, or mental impairments, those lacking basic electrical knowledge, or children without adult supervision.
2. Do not immerse the product in water or any liquid.
3. Keep power plugs and electrical insulation away from wet fingers or body parts to prevent electric shock.
4. If the power cord is damaged, it must be replaced by a qualified professional from the manufacturer or its maintenance department to avoid hazards.
5. During use, keep air lines and moving parts away from long hair, loose clothing, fingers, and other body parts.
6. Do not insert metal wires (e.g., pins, iron wires, copper wires) into product slots to prevent electric shock.
7. Only authorized professional technicians from the Company should repair or dismantle the product.
8. When not in use, unplug the power plug to prevent fire or other accidents caused by electric leakage or short circuits.
9. If the product malfunctions during use, immediately unplug the power plug and contact the after-sales service center.
10. Clean the sewage tank promptly after use to keep air lines unblocked. Blocked air lines can reduce suction, cause motor overheating, and shorten the product's service life.
11. The product is designed for indoor beds, sofas, and blankets. Performance may vary on other materials.
12. Do not shake the product during use to prevent sewage from entering the motor.
13. Residual water in the product is from factory testing and is normal.
14. Beware of scalding from hot water during use.
15. Periodically inspect the hose; do not use if damaged.
16. Prevent liquid from contacting components containing electrical parts, such as the oven interior.
17. Always unplug the power plug after use and before maintenance.
18. Fill the clean water tank with pure water only.
19. To wind up the power cord, first power off the product, unplug it, and then carefully wind the cord.

Product Structure

The product consists of the following main components:

• 1. Sewage tank
• 2. Clean water tank
• 3. Hose fastener
• 4. Product body
• 5. Power cord winding key
• 6. Power plug
• 7. Transparent cover (on brush head)
• 8. Brush head
• 9. Water key (on brush head)
• 10. Handle
• 11. Key panel (on main unit)
• 12. Brush head fastener
• 13. Hose assembly

Circuit Diagram

The circuit diagram illustrates the flow of power from AC input to the various components including the Motor, Control panel, Main board, Pump, and Heater. This diagram is for reference only and may be updated.

Product Parameters

Packing List

Operating Methods

Follow these steps for assembly and initial use:

1. Assemble the main unit: Open the package, take out the main unit, and insert the four hose fasteners into their corresponding positions on the main unit.
2. Connect hose assembly: Insert the hose assembly into the corresponding position on the main unit, ensuring it is not inserted in reverse.
3. Attach brush head: Insert the brush head assembly into the other end of the hose assembly, ensuring it is not inserted in reverse.
4. Open clean water tank cap: Open the cap of the clean water tank as shown in the diagram.
5. Fill clean water tank: Fill the clean water tank with pure water. Ensure the water level does not exceed the designated water level mark.
6. Secure clean water tank: Tighten the cap securely. Place the clean water tank assembly into the upper casing of the main unit as shown.
7. Install sewage tank: Place the sewage tank assembly into the upper casing of the main unit as shown.

Startup and Operation

Function Descriptions

• Power on: The product enters standby mode when plugged in.
• Power on/off key [Power Button]: Click gently to start the dry/wet motor, pump, and heater together. The indicator light will be white (low speed). Click again to stop these components; the indicator light will turn off.
• MAX key [Max Speed Button]: When the product is powered on (low speed, white indicator), click this key to switch the motor to high speed. The indicator light will turn red. Click again to return to low speed.
• Normal/hot water switch key [Water Mode Button]: When the heater is operating (red indicator), click this key to switch to normal temperature water spray. The indicator light will turn white. Click again to switch back to hot water.
• Operation Modes: Hot water is sprayed when the [Water Mode Button] is red; normal temperature water is sprayed when it is white. The motor runs at high speed when the [Max Speed Button] is red; low speed when it is white. After use, press the [Power Button] to put the product in standby. Unplug if not in use.

Startup Procedure

Ensure both the clean water tank and sewage tank are properly installed and filled (clean water tank with water). Confirm the hose and brush head are correctly attached. Unwind the power cord, insert the plug into the socket to make the product ready.

Operation

1. Click the [Power Button] gently to initiate the working state. The indicator light will show white. In this default mode, hot water is sprayed from the nozzle, and the vacuum motor runs at low speed.
2. Wetting Surface: Hold the brush head with one hand, place it horizontally close to the surface to be cleaned. Press the [Water Spray Button] with a finger to wet the surface. Move the brush head back and forth repeatedly to clean. Release the [Water Spray Button] when no water is needed.
3. Normal Temperature Water Spray: When the product is operating, click the [Water Mode Button] gently. With the indicator light showing white, press the [Water Spray Button] to spray normal-temperature water.
4. Increase Suction: Click the [Max Speed Button] gently. The indicator light will show red, indicating the motor is running at high speed for increased suction.

Cleaning and Maintenance

Cleaning of Internal Pipes

1. With clean water in the clean water tank and the product powered on, hold the brush head with a hand. Place the brush horizontally close to a clean surface or countertop. Press the [Water Spray Button] to clean the internal pipes. You can switch between normal or hot water and high or low motor speed for better cleaning results.
2. Cleaning Brush Head Transparent Cover: If there are stains on the brush head's transparent cover, first unplug the power cord. Pull out the transparent cover as indicated by the arrow, and wash it separately.
3. Dry the transparent cover by wiping or air drying, then reinstall it back onto the brush head.

Cleaning of Sewage Tank

1. Lift the sewage tank vertically out from the main unit.
2. Unplug the stopper on the sewage tank, discharge the sewage, and then reinsert the stopper.
3. Open the bottom cap of the sewage tank. Take out the internal components and wash the tank and components with clean water.
4. Pull out the suction port cover from the internal component. Take out the filter sponge, wash and dry it, then reinstall the filter sponge and the suction port cover.
5. Dry all internal components and the sewage tank by air blowing or air drying. Reinstall the internal components back into the sewage tank and tighten the cap.
6. Place the sewage tank assembly back into the upper casing of the main unit.

General Cleaning

The outer surface of the entire product can be wiped with a dry or slightly wet rag. Remember to unplug the power plug before wiping.

Storage

1. If the product is not used for an extended period, press the power cord winding key forcefully to wind up the power cord into the product.
2. Place and store the hose and brush head in a well-ventilated and dry place.

Fault Analysis and Solution

⚠️ Caution: It is required to disconnect the power supply and pull out the power plug before troubleshooting.

If the fault persists, please contact a franchised maintenance department of the Company for a solution.

WEEE Directive Compliance:

All products bearing this symbol are waste electrical and electronic equipment (WEEE as per directive 2012/19/EU). They should not be mixed with unsorted household waste. Protect human health and the environment by handing over your waste equipment to a designated collection point for recycling. Correct disposal and recycling help prevent potential negative consequences to the environment and human health. Contact local authorities for more information on collection points.